New Amuse Ericcson E92 M3 Exhaust

pdjafari · 03-19-2008, 02:25 PM

So here's the new Amuse/Ericcson exhaust for the E92 M3...

Million dollar question "Will it fit the e92 335????????

http://www.bulletproofautomotive.com....jpg&item=6550

XPO186 · 03-19-2008, 02:28 PM

Cot damn... prolly not. That is one bad ass looking piece of pipe.

Are those two sets of cats I see back there???

Crimson92 · 03-19-2008, 02:30 PM

titanium ftw

pdjafari · 03-19-2008, 02:32 PM

On the website it says OEM e92 M3 exhaust weighs 59-60 lbs, this titanium one weighs 23 lbs!!! Thats less than half!! And it costs 10k!!!

O-cha · 03-19-2008, 02:32 PM

Quote:

Originally Posted by XPO186

Cot damn... prolly not. That is one bad ass looking piece of pipe.

Are those two sets of cats I see back there???

Looks like a rats nest to me.

One of those "sets of cats" are probably resonators of some sort.

jay spec · 03-19-2008, 02:33 PM

Quote:

Originally Posted by pdjafari

So here's the new Amuse/Ericcson exhaust for the E92 M3...

Million dollar question "Will it fit the e92 335????????

not a chance

Sniz · 03-19-2008, 02:53 PM

that looks really sweet and REALLLLLY expensive. I would personally prefer to see that as more straight pipe and not as many bends. Also looks like it has 2 sets of cats, an x-pipe, 1 set of resonators and 1 set of mufflers..........I would prefer fewer cats as well in an aftermarket piece.

basically what I am saying is i'm sure you could make a much cheaper exhaust that would hold up just as good and make more HP. Of course then you couldnt brag to your buddies about your 10k titanium exhaust.

pdjafari · 03-19-2008, 03:20 PM

alot of the cost is associated w/ full titanium...trying to weld titanium again I have read requires specific tools/machines/experience etc. I agree 10k is ridiculous...even 5k is kinda steep for an exhaust. But titanium exhausts also have their own specific 'tone' which sound alot different from other exhausts.

down4it · 03-19-2008, 03:58 PM

Quote:

Originally Posted by Sniz

that looks really sweet and REALLLLLY expensive. I would personally prefer to see that as more straight pipe and not as many bends. Also looks like it has 2 sets of cats, an x-pipe, 1 set of resonators and 1 set of mufflers..........I would prefer fewer cats as well in an aftermarket piece.

basically what I am saying is i'm sure you could make a much cheaper exhaust that would hold up just as good and make more HP. Of course then you couldnt brag to your buddies about your 10k titanium exhaust.

With an N/A V8 motor it is good to have the added back pressure for more power... F/I motors benifit from zero back pressure on the other hand...

ironic · 03-19-2008, 04:26 PM

the real question if if u can afford that

SPEZNAS92 · 03-19-2008, 10:00 PM

i think i would put it in my living room as a center piece....what a piece of art.

hakaida442 · 03-20-2008, 03:15 AM

who cares if it fits the 335. isnt this a m3 forum?

OC ///M · 03-20-2008, 09:09 AM

^ ...this is another e90 post that was thrown over here by the mods.

Gee, thanks guys...

OzStriker · 03-20-2008, 04:20 PM

How on earth is that going to fit the 335? See those two pipes on the right side of the pic?

SS32 · 03-21-2008, 11:06 AM

Holy shit! I want to hear that thing.

0-60Motorsports · 04-20-2008, 08:13 AM

AMAZING ZORST! Probably the sexiest system out there for the E92 M3

Big Windy · 04-20-2008, 09:14 AM

wow, those are some big as ends.

m3forever · 04-23-2008, 01:45 AM

are there any sound clips for those exhaust?

hakaida442 · 04-23-2008, 10:52 PM

Quote:

Originally Posted by PencilGeek

I've been looking into this exhaust, and found some interesting stuff. There is no performance data for it -- no real HP figures. If you dig deep enough at the Ericsson web site -- by translating to English -- you'll find that the HP figures they have posted...they made up out of thin air (they even admit it).

So here's the $11500 question:
1. How many people would buy this exhaust without real performance data?
2. How many people would buy this exhaust without hearing it?

I'm guessing that 2) may be important to some, but not important to others. I'm also guessing that 1) is important to almost everybody who's considering buying an $11500 exhaust. But just in case it's not, here's question 3:

3. How many people would just buy it based on looks alone?

/PG

I would buy it without data. I had an amuse ti exhaust on my 97 supra turbo and it was ultra light and put out more power than the hks ti exhaust that I had on previously. I'm sure that this will be another great exhaust from amuse.

03-19-2008, 02:25 PM	#1
pdjafari Colonel Drives: Axe Murderer with headlights Join Date: Oct 2007 Location: Earth Posts: 2,409 iTrader: (5)	New Amuse Ericcson E92 M3 Exhaust So here's the new Amuse/Ericcson exhaust for the E92 M3... Million dollar question "Will it fit the e92 335???????? http://www.bulletproofautomotive.com....jpg&item=6550
	Tweet

03-19-2008, 02:53 PM	#7
Sniz Lieutenant General Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD Posts: 10,446 iTrader: (1)	that looks really sweet and REALLLLLY expensive. I would personally prefer to see that as more straight pipe and not as many bends. Also looks like it has 2 sets of cats, an x-pipe, 1 set of resonators and 1 set of mufflers..........I would prefer fewer cats as well in an aftermarket piece. basically what I am saying is i'm sure you could make a much cheaper exhaust that would hold up just as good and make more HP. Of course then you couldnt brag to your buddies about your 10k titanium exhaust. __________________

03-19-2008, 04:26 PM	#10
ironic Major General Drives: Jet Black 335i Join Date: Dec 2006 Location: San Francisco, Ca Posts: 8,338 iTrader: (22)	the real question if if u can afford that __________________ Widebody 335i Project Car BUILD \| PHOTOSHOOT

03-20-2008, 09:09 AM	#13
OC ///M Lieutenant Colonel Drives: SSII e92 M3 Join Date: Feb 2007 Location: So Cal Posts: 1,713 iTrader: (0)	^ ...this is another e90 post that was thrown over here by the mods. Gee, thanks guys... __________________ OC ///M 2011 ZCP \| ED + PCD \| Akra Evo \| Brembo 380mm \| ESS Tuning Software \| Evosport Pulley \| Molded OEM Spoiler & Splitters \|

03-20-2008, 04:20 PM	#14
OzStriker Captain Drives: Ford Falcon Ute, Ducati 1198S Join Date: Sep 2007 Location: Melbourne Posts: 923 iTrader: (1) Garage List 2008 BMW E92 M3 [0.00] 2009 Ducati 1198S [0.00]	How on earth is that going to fit the 335? See those two pipes on the right side of the pic? __________________ BMW E92 M3 6MT, G-Power SKII supercharged, custom exhaust with 100 cell cats and Remus Sport mufflers, Brembo 380mm BBK, BMW Performance steering wheel, LUX H8 angel eyes, CF CSL boot, Hamann CF diffuser, Vorsteiner CF lip, CF grilles, CF gills, CF bonnet vents, BMW Performance stripes, RAC RG63 wheels, Eibach lowering springs, camber modifications.

03-19-2008, 02:28 PM	#2
XPO186 Colonel Drives: E92 335i Join Date: May 2007 Location: SoCal Posts: 2,729 iTrader: (19)	Cot damn... prolly not. That is one bad ass looking piece of pipe. Are those two sets of cats I see back there???

03-19-2008, 02:32 PM	#4
pdjafari Colonel Drives: Axe Murderer with headlights Join Date: Oct 2007 Location: Earth Posts: 2,409 iTrader: (5)	On the website it says OEM e92 M3 exhaust weighs 59-60 lbs, this titanium one weighs 23 lbs!!! Thats less than half!! And it costs 10k!!!

03-19-2008, 03:20 PM	#8
pdjafari Colonel Drives: Axe Murderer with headlights Join Date: Oct 2007 Location: Earth Posts: 2,409 iTrader: (5)	alot of the cost is associated w/ full titanium...trying to weld titanium again I have read requires specific tools/machines/experience etc. I agree 10k is ridiculous...even 5k is kinda steep for an exhaust. But titanium exhausts also have their own specific 'tone' which sound alot different from other exhausts.

03-19-2008, 10:00 PM	#11
SPEZNAS92 First Lieutenant Drives: 2009 135i Join Date: Mar 2008 Location: Studio City Posts: 302 iTrader: (2)	i think i would put it in my living room as a center piece....what a piece of art.

03-20-2008, 03:15 AM	#12
hakaida442 First Lieutenant Drives: 11 Porsche 911 Carrera GTS Join Date: Feb 2008 Location: Las Vegas, NV Posts: 371 iTrader: (0)	who cares if it fits the 335. isnt this a m3 forum?

03-21-2008, 11:06 AM	#15
SS32 Major Drives: 2008 M3 Join Date: May 2007 Location: Wilmington, NC Posts: 1,431 iTrader: (0)	Holy shit! I want to hear that thing. __________________ V1 DIY - Blinder M45 DIY - Exhaust Cutouts - Removed Clutch Pedal Spring DIY - Fiamm Air Horns

04-20-2008, 08:13 AM	#16
0-60Motorsports Captain Drives: BMW M3 JB 04 Coupe Join Date: Aug 2007 Location: Kingdom of Bahrain Posts: 867 iTrader: (1)	AMAZING ZORST! Probably the sexiest system out there for the E92 M3 __________________ Current Mods: GC Coilovers, Eibach Sways, RE RTABs/RSMs/RCAs, INTRAVEE II + Alpine KCA-420i, Black Roundels, ///MFEST Badges, Depo's, Screen protector for OEM 16:9 display, VCSL Bumper + Race Lip, CF Boot, CF Rear Diffusor, DIETZ TV in Motion, AP Headers, RT Cats, Oem exhaust + 80mm tips, Z8 Starter Button, Lamin-X, GM SMG Paddles, 0-60 Steering, OEM CSL interior, OEM CSL Intake, EVOLVE Tune, BBS CH's, 3K AE's & Low Beams, FX-R Proj

04-20-2008, 09:14 AM	#17
Big Windy Major General Drives: audi s4 Join Date: Mar 2007 Location: seatac, wa Posts: 5,124 iTrader: (0) Garage List 2009 E92 M3 [4.50] 2000 Saleen S281 Su ... [0.00]	wow, those are some big as ends.

04-23-2008, 01:45 AM	#18
m3forever Private Drives: 2010 335D Join Date: Oct 2007 Location: Socal Posts: 62 iTrader: (0)	are there any sound clips for those exhaust? __________________ 2010 BMW 335D 2006 YAMAHA R6 2004 Acura TL Aspec (Sold) 2003 BMW E46M3 (Sold)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search