BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Suspension | Brakes | Chassis
 
Post Reply
 
Thread Tools Search this Thread
      03-20-2012, 05:21 PM   #1
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
7988
Rep
18,766
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
▀▄ eas | EDC Elimination Coding for aftermarket coilover Suspension systems

Through a joint venture with the Autologic team, we are now able to properly remove EDC coding for those that have upgraded to aftermarket coilover setups.



Supported Coilover systems include (but not limited to):
- Bilstein PSS10
- KW Suspensions (not required on Sleeve-over kits)
- Moton Street Sport
- AC Schnitzer Racing Suspension
- RD Sport/Racing Dynamics Chassis Kit
- AST 4100/4200, 4150/4250
- Ohlins
- JRZ

Coding eliminates the need to purchase external code isolator kits, which can look unsightly under the hood and get extremely hot after extended use. For those not local to our facility, the Macht Schnell EDC Emulation Module will keep the hood clean from unsightly external resistor packs and produce zero heat, as emulation is performed digitally instead of using resistance.

Coding can be reinstalled at any time if you should change your mind in the future.

If we can save money, we'd like to pass along those savings to you. All EDC-equipped coilover installs now include EDC coding removal at no additional charge, allowing you to pocket the additional savings.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      03-23-2012, 09:28 PM   #2
audioMeth
BTC maxi
audioMeth's Avatar
United_States
220
Rep
1,123
Posts

Drives: F80
Join Date: Feb 2009
Location: Rehoboth, MA

iTrader: (8)

why is it always shops on the west coast, god i'm on the wrong coast.
Appreciate 0
      03-26-2012, 11:16 AM   #3
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
7988
Rep
18,766
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by nuespeedgti View Post
why is it always shops on the west coast, god i'm on the wrong coast.
Road Trip!
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      03-26-2012, 12:29 PM   #4
PAKMAN
Lieutenant General
PAKMAN's Avatar
North Korea
360
Rep
16,214
Posts

Drives: 2011 E92 M3
Join Date: May 2006
Location: NORTHERN CALIFORNIA

iTrader: (35)

Garage List
2011 BMW E92 M3  [9.50]
2006 e90 330i  [5.50]
dangggggg! so no more modules needed for c/o kits
nice find guys! thanks for the support
__________________
stock car
Appreciate 0
      03-26-2012, 12:48 PM   #5
M3PO
Colonel
M3PO's Avatar
83
Rep
2,792
Posts

Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

iTrader: (7)

Wow! You guys are awesome!

Can you code out headlight washers?
Appreciate 0
      03-26-2012, 12:50 PM   #6
Singletrack
4th down; 4th quarter? Renegade.
Singletrack's Avatar
United_States
87
Rep
3,850
Posts

Drives: 09 SSII E92 M3; 19 FG M5C
Join Date: Aug 2008
Location: Pittsburgh, PA

iTrader: (3)

Great new offering!
Appreciate 0
      03-26-2012, 12:56 PM   #7
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
7988
Rep
18,766
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by M3PO View Post
Wow! You guys are awesome!

Can you code out headlight washers?
Yes.

We've also converted TPMS systems to RDC type, for those that still wish to retain TPMS capabilities, but avoid using pressure-type sensors (instead taking readings from wheel sensors, like E46M3).

This is especially helpful for those that see regular track use, with multiple sets of wheels.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      03-26-2012, 01:19 PM   #8
GOLFFRR
GOLFFRR's Avatar
10687
Rep
27,506
Posts

Drives: GOLFFRR cart
Join Date: Mar 2009
Location: we sell BMWs to "ALL" US states

iTrader: (4)

Anyone who is located near EAS I would highley recommend you stop by. Tom and his crew are top notch and are always on the cutting edge of the M game.
__________________

BEFORE YOU BUY YOUR NEXT BMW, PM ME FIRST WE CAN HOOK YOU UP!
Jimmy Miller:Jimmym@bmwofcamarillo.com Cell:805-509-2048
If you have any issues getting a hold of Jimmy M PLEASE PM me, I'm available everyday till 545pm!
Appreciate 0
      03-26-2012, 06:31 PM   #9
chuxdelux
Captain
15
Rep
646
Posts

Drives: 1988/1998/2005 M3
Join Date: Jul 2011
Location: Scottsdale, AZ

iTrader: (1)

This is a great alternative to the options currently available.
Appreciate 0
      04-06-2012, 07:56 AM   #10
Giccy
Captain
Giccy's Avatar
Canada
33
Rep
748
Posts

Drives: like he has much to learn
Join Date: Oct 2011
Location: Toronto

iTrader: (2)

Quote:
Originally Posted by nuespeedgti View Post
why is it always shops on the west coast, god i'm on the wrong coast.
Wrong country.......
Appreciate 0
      04-06-2012, 06:54 PM   #11
esquire
Brigadier General
esquire's Avatar
United_States
478
Rep
3,044
Posts

Drives: 2011 Dakar Yellow M3, 2018 M5
Join Date: Feb 2007
Location: Orange County, California

iTrader: (0)

tom, you posted this too late. damn you.
__________________

[ESS VT2-625] [Akrapovic Evolution Exhaust] [KW Clubsports] [OSS Angel Eyes] [Revinora r-CRT Lip]
[Vorsteiner Boot] [Challenge Race Diffuser] [See the Build Thread HERE]
Appreciate 0
      04-06-2012, 07:01 PM   #12
1MOREMOD
-
1MOREMOD's Avatar
United_States
11815
Rep
23,187
Posts

Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

iTrader: (5)

what is the macht snell EDC emulator you mentioned? is that wired in, in the trunk?
__________________

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|
Appreciate 0
      04-09-2012, 11:35 AM   #13
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
7988
Rep
18,766
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by esquire View Post
tom, you posted this too late. damn you.
Remove them, have them coded out and sell them to someone who may possibly need them or that has a non-KW setup.

This way you won't see any large, ugly resistor packs in the engine bay (which get VERY hot). You may even come up a slight margin compared to coding, we've had people removing their Code isolators just to sell them on the forums. EDC coding can be added back at any time if the car is sold.

Quote:
Originally Posted by chriszeh View Post
what is the macht snell EDC emulator you mentioned? is that wired in, in the trunk?
This installs at the EDC module in the trunk, behind the liner - emulating the EDC signal to prevent the warning light from appearing.

The Macht Schnell EDC module is completely hidden from view.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      04-09-2012, 11:48 AM   #14
SignatureJames
Lieutenant Colonel
United_States
231
Rep
1,522
Posts

Drives: 2023 BMW M5 Competition
Join Date: Jun 2010
Location: Irvine, CA

iTrader: (15)

I am a sucker for the coding, I went ape sh*t with Tom on coding everything for my 2011 M3.

Coded : TPMS ([I]so swapping wheels for wheel wh0re is easy[ and no stupid yellow exclamtaion light/I]), EDC (so I can remove the heavy & hot running KW EDC Modules), folding mirrors on lock, window roll up/down on lock

the only ones I can think of off my head I am missing is the "enable time travel" and "teleport" codes through autologic...
__________________
"if you ain't first, you're last!"

1992 Acura NSX / 1998 Acura Integra Type R / 2023 BMW M5 Competition / 2019 Porsche Cayenne S / 2023 Porsche Taycan GTS Sport Turismo
Appreciate 0
      05-04-2012, 06:55 PM   #15
demonshin
Second Lieutenant
demonshin's Avatar
United_States
84
Rep
251
Posts

Drives: '08 E92 M3
Join Date: Feb 2012
Location: Bonney Lake, WA

iTrader: (3)

I want to get rid of those error codes help me! :P

Can you PM me with more info? I will be in LA area in 2 weeks and would love to get this done!

Thanks!
Appreciate 0
      03-07-2013, 10:00 AM   #16
E92inSG
Captain
E92inSG's Avatar
551
Rep
815
Posts

Drives: F80 M3
Join Date: Jul 2012
Location: Asia

iTrader: (1)

Do we have to leave the EDC sensors on top of the struts in place even after coding them out?

I'd imagine it will be quite painful to have to remove the entire trunk lining everytime u needed to make an adjustment. The fronts seem easy enough.
Appreciate 0
      03-07-2013, 11:07 AM   #17
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
7988
Rep
18,766
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by E92inSG View Post
Do we have to leave the EDC sensors on top of the struts in place even after coding them out?

I'd imagine it will be quite painful to have to remove the entire trunk lining everytime u needed to make an adjustment. The fronts seem easy enough.
Once coded, the emulators are no longer needed. They can be removed.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      03-07-2013, 11:12 AM   #18
Jon@Bimmersport Automotive
Banned
Canada
43
Rep
342
Posts

Drives: E90 M3 Active Supercharged
Join Date: Jun 2008
Location: Mississauga, On Canada

iTrader: (0)

Garage List
2003.5 BMW M3  [10.00]
Quote:
Originally Posted by nuespeedgti View Post
why is it always shops on the west coast, god i'm on the wrong coast.
ANYBODY with an Autologic has this feature and is standard in the software we regularly update...I've been doing it for a while now.

Simply unplug the sensors, recode the vehicle and re initialize the DSC settings and your good to go.
Appreciate 0
      03-07-2013, 04:22 PM   #19
E92inSG
Captain
E92inSG's Avatar
551
Rep
815
Posts

Drives: F80 M3
Join Date: Jul 2012
Location: Asia

iTrader: (1)

Quote:
Originally Posted by tom @ eas
Quote:
Originally Posted by E92inSG View Post
Do we have to leave the EDC sensors on top of the struts in place even after coding them out?

I'd imagine it will be quite painful to have to remove the entire trunk lining everytime u needed to make an adjustment. The fronts seem easy enough.
Once coded, the emulators are no longer needed. They can be removed.
Hi Tom, I'm referring to the stock EDC attachments on top of the strut, not the aftermarket emulators. They don't need to be there?

Thanks!
__________________
Appreciate 0
      03-07-2013, 05:17 PM   #20
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
7988
Rep
18,766
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by E92inSG View Post
Hi Tom, I'm referring to the stock EDC attachments on top of the strut, not the aftermarket emulators. They don't need to be there?

Thanks!
No, the connectors can be removed if desired.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      03-07-2013, 05:56 PM   #21
E92inSG
Captain
E92inSG's Avatar
551
Rep
815
Posts

Drives: F80 M3
Join Date: Jul 2012
Location: Asia

iTrader: (1)

That's fantastic. Thanks for the quick response. I'm installing a set of BILSTEIN PSS10 and gonna check with my local shop if they are able to do this for me.
__________________
Appreciate 0
      03-07-2013, 06:06 PM   #22
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
7988
Rep
18,766
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by E92inSG View Post
That's fantastic. Thanks for the quick response. I'm installing a set of BILSTEIN PSS10 and gonna check with my local shop if they are able to do this for me.
If they have an autologic machine, they should be able to do it.

Feel free to email me if you are having trouble and I'll be happy to help.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:03 PM.




m3post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST