|
|
06-30-2015, 05:49 PM | #1 |
Enlisted Member
6
Rep 36
Posts |
Spring lengths for MCS dampers
Hello,
I have a set of mcs dampers with ground control camber plates and rear ride height adjusters. I'm ordering springs and was looking for some advice on length. The rates im trying are 600 front 900 rear and was thinking a 7" spring in front with a 9" in the rear. the 9" length in rear has been documented by a few of the forums members but I cant find any information on the fronts. springs are 2.25id all around. |
07-07-2015, 03:15 AM | #2 |
Private
6
Rep 86
Posts |
I use 6" plus helper springs which brick at 3/4". 7" would apply if you don't intend to use helpers.
As for the rear, I couldn't tell you. Every set I have built (20-30) have been coilover rear. |
Appreciate
0
|
07-08-2015, 11:10 AM | #4 | |
Captain
408
Rep 631
Posts
Drives: 2011 E90 M3, 2018 F87 M2
Join Date: Nov 2006
Location: Virginia Beach, VA
|
Quote:
__________________
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|