Fuses for continuous power supply?

cheweihu · 07-05-2012, 07:21 PM

Hey guys,

I have this power control box for the car blackbox which needs to connect to ACC+ (ignition) and BATT+ (permanent, continuous power source), I've done some search however from the fuse diagram I couldn't really figure which ones are the permanets, which, I suppose, could be fuse for the hazards(didn't see on the diagram) and door lock(not sure). Cig lighter and interior lights are not continuous, by the way.

Thanks,

Jared

THE TECH · 07-05-2012, 08:19 PM

What is it that you are trying to hookup?

cheweihu · 07-06-2012, 02:15 AM

Quote:

Originally Posted by THE TECH

What is it that you are trying to hookup?

Something like this onewhich can provide the car blackbox powers after engine is cut (to record after the car is parked) while not letting the camera drains the battery. (it can be set to shut down when it voltage is lower than certain point or by time)

Thanks,

Jared

pepsih · 09-24-2012, 02:34 PM

any update??? im on the same boat

tom @ eas · 09-24-2012, 02:51 PM

Quote:

Originally Posted by cheweihu

Hey guys,

I have this power control box for the car blackbox which needs to connect to ACC+ (ignition) and BATT+ (permanent, continuous power source), I've done some search however from the fuse diagram I couldn't really figure which ones are the permanets, which, I suppose, could be fuse for the hazards(didn't see on the diagram) and door lock(not sure). Cig lighter and interior lights are not continuous, by the way.

Thanks,

Jared

All fuses will time out when the car enters sleep mode. Permanent +12V will need to be tapped off the JBE module:

Disregard the orange/green harness w/ terminal connectors, as this is related to something else.

PIN3 on the JBE module (left side connector, red/blue wire) will provide constant power for the PSW. PIN6 can be used for ground.

GORDON.M3 · 09-11-2023, 12:07 AM

Want to bump this, did anyone have any more to chime in on this topic?
Got a new dash camera, looking for an ACC+ and Constant 12V line.

07-05-2012, 07:21 PM	#1
cheweihu Private 17 Rep 63 Posts Drives: E92 M3 Join Date: Sep 2009 Location: Marin County, CA iTrader: (0)	Fuses for continuous power supply? Hey guys, I have this power control box for the car blackbox which needs to connect to ACC+ (ignition) and BATT+ (permanent, continuous power source), I've done some search however from the fuse diagram I couldn't really figure which ones are the permanets, which, I suppose, could be fuse for the hazards(didn't see on the diagram) and door lock(not sure). Cig lighter and interior lights are not continuous, by the way. Thanks, Jared
	Appreciate 0 Tweet Quote

07-05-2012, 08:19 PM	#2
THE TECH BimmerPost Supporting Vendor 307 Rep 13,093 Posts Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas iTrader: (45) Garage List 2013 Nissan GTR [0.00] 2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00]	What is it that you are trying to hookup?
	Appreciate 0 Quote

09-24-2012, 02:34 PM	#4
pepsih Captain 129 Rep 820 Posts Drives: f02, e24 Join Date: Oct 2011 Location: Long Island iTrader: (4)	any update??? im on the same boat
	Appreciate 0 Quote

09-11-2023, 12:07 AM	#6
GORDON.M3 Brigadier General 1423 Rep 3,001 Posts Drives: E92 M3 • F25 X3 M-Sport Join Date: Dec 2013 Location: LAX/YYZ/NRT iTrader: (11)	Want to bump this, did anyone have any more to chime in on this topic? Got a new dash camera, looking for an ACC+ and Constant 12V line. __________________ INSTAGRAM: GORDON.M3 North American Mr12Volt Carplay/Android Auto Distributor DINAN \| EVOSPORT \| VAC \| ARP \| RD SPORT \| NEEZ \| EIBACH \| CSF \| IND \| BILSTEIN \| KLASSEN \| BREMBO \| ENDLESS \| BBS \| BPM SPORT \| PROJECT MU \| EVENTURI
	Appreciate 0 Quote