Pulling trigger on BBS LM-R but have a question to you guys.

sehrgut · 02-22-2010, 03:00 PM

So I'm finally getting BBS LM-Rs but I'm not sure what setup I want or what might fit to make it look as flush as possible;

Thanks alot, really appriciate this.

OMID INC · 02-22-2010, 03:11 PM

If you want it to look very flush, I would do the following:

F: 19 x 8.5 et 13 (this would stick out 16mm from stock)
R: 19 x 10 et 20 (this would stick out 9mm from stock)

duk · 02-22-2010, 03:33 PM

i am too interested in this setup! in diamond black!

RENN Spec · 02-22-2010, 03:59 PM

19x9.5 + 25
19x10 + 20

Currently only DSK color available.
THe 19x8.5 +13 will be just as aggressive as the 19x9.5 +25 but without the lip.

sehrgut · 02-23-2010, 02:37 AM

Quote:

Originally Posted by Jason@Renn-Spec

19x9.5 + 25
19x10 + 20

Currently only DSK color available.
THe 19x8.5 +13 will be just as aggressive as the 19x9.5 +25 but without the lip.

Thanks. But with a 19x9.5 +25 the innerclearence will be -9mm. Will the rub against my stock struts?

thanks dude, yea it will have more lip then the 19x8.5 +13.

But as for the rear, 19x10 +20 will be fine right without rubbing issues?

sehrgut · 02-23-2010, 02:39 AM

Quote:

Originally Posted by OMID INC

If you want it to look very flush, I would do the following:

F: 19 x 8.5 et 13 (this would stick out 16mm from stock)
R: 19 x 10 et 20 (this would stick out 9mm from stock)

Thanks mate. About the front i could do 19x9.5 +25mm and it wil stick out 17mm i think no?

As for the rear, yes the 19x10 et20 seams pretty perfect.

Only concern is the innerclearence with stock struts and breaks, no issues you think?

ooowowizstev · 02-23-2010, 02:59 AM

Congrats, DBK ftw. Would love to see them in person when you do get them.

808E90 · 02-23-2010, 03:38 AM

Quote:

Originally Posted by sehrgut

Thanks. But with a 19x9.5 +25 the innerclearence will be -9mm. Will the rub against my stock struts?

thanks dude, yea it will have more lip then the 19x8.5 +13.

But as for the rear, 19x10 +20 will be fine right without rubbing issues?

Quote:

Originally Posted by sehrgut

Thanks mate. About the front i could do 19x9.5 +25mm and it wil stick out 17mm i think no?

As for the rear, yes the 19x10 et20 seams pretty perfect.

Only concern is the innerclearence with stock struts and breaks, no issues you think?

I'm running a BBS LM set up at:

19x9.5 et22 265/30/19
19x11 et20 295/30/19

I have no rubbing at full turns or any problems with strut/brake clearence.
If I was you I would go ... 19x9.5 and 19x10

M3_LIN · 02-23-2010, 10:31 AM

i would run my setup. But im not sure if you want 20s or not.

The specs are on my sig!

Ed Lin

RENN Spec · 02-24-2010, 01:16 PM

Quote:

Originally Posted by sehrgut

Thanks. But with a 19x9.5 +25 the innerclearence will be -9mm. Will the rub against my stock struts?

thanks dude, yea it will have more lip then the 19x8.5 +13.

But as for the rear, 19x10 +20 will be fine right without rubbing issues?

I can't say for sure on stock struts but we have done this setup for a customer with KW. The lip looks somewhat identical from the front and rear so I'm not sure if that's your cup of tea. As far as pictures go, I can't find any pictures of it on my HD. Sorry!

Ryan@IND · 02-26-2010, 06:47 PM

Quote:

Originally Posted by sehrgut

Thanks. But with a 19x9.5 +25 the innerclearence will be -9mm. Will the rub against my stock struts?

thanks dude, yea it will have more lip then the 19x8.5 +13.

But as for the rear, 19x10 +20 will be fine right without rubbing issues?

that is actually a really nice set up.
won't have to worry about the stock struts at all.

we did the same set up for Kingleh but I am not too sure if he had KW before or after the BBS.

r_seng · 02-26-2010, 10:24 PM

Quote:

Originally Posted by Julius@WSTO

that is actually a really nice set up.
won't have to worry about the stock struts at all.

we did the same set up for Kingleh but I am not too sure if he had KW before or after the BBS.

Sex on wheels

Poofyo101 · 02-27-2010, 06:39 AM

^^those are 19s?

jrAdiRon · 02-27-2010, 11:21 AM

do you have pictures of the diamond black version?

Johnny Lin · 02-27-2010, 11:25 AM

Here is a buddy of my with his AW E92 M on a Diamond Black 20" Ercisson Offset BBS LM-R and the Red BBS Studs and Lugs. He got a great deal from RennSpec.

jrAdiRon · 02-27-2010, 02:56 PM

Very nice!

1036E90M · 03-02-2010, 03:16 AM

Quote:

Originally Posted by Johnny Lin

Here is a buddy of my with his AW E92 M on a Diamond Black 20" Ercisson Offset BBS LM-R and the Red BBS Studs and Lugs. He got a great deal from RennSpec.

Absolutely beautiful setup. Such a fan of LM anything. Hopefully I can do the same

.

Victory Road · 03-01-2011, 12:09 PM

Agreed.

Diamond Black LM-R with BBS Red Caps, and BBS Japan Red lug nut kit.

tha_good_life · 03-01-2011, 04:02 PM

LM-R are pure sex if you get the right fitment!

GTM_Challenge · 03-02-2011, 10:19 AM

The 20in ericsson spec LM-R are probably the most aggressive and have the biggest lips. Those are my personal favorites

M3_LIN · 03-03-2011, 01:31 AM

Quote:

Originally Posted by Dave@WSTO

Agreed.

Diamond Black LM-R with BBS Red Caps, and BBS Japan Red lug nut kit.

+1!

Ed Lin

1cleanm6 · 03-03-2011, 02:00 AM

Quote:

Originally Posted by GTM_Challenge

The 20in ericsson spec LM-R are probably the most aggressive and have the biggest lips. Those are my personal favorites

Does anyone know the specs for this setup? Im really considering switching to LM-R's in 20's.

02-22-2010, 03:00 PM	#1
sehrgut Major 33 Rep 1,033 Posts Drives: emthree Join Date: Oct 2009 Location: socal iTrader: (1)	Pulling trigger on BBS LM-R but have a question to you guys. So I'm finally getting BBS LM-Rs but I'm not sure what setup I want or what might fit to make it look as flush as possible; Thanks alot, really appriciate this. Last edited by sehrgut; 02-23-2010 at 02:40 AM..
	Appreciate 0 Tweet Quote

02-22-2010, 03:11 PM	#2
OMID INC Lieutenant Colonel 92 Rep 1,562 Posts Drives: E70 X5 Join Date: Feb 2010 Location: Chicago iTrader: (6)	If you want it to look very flush, I would do the following: F: 19 x 8.5 et 13 (this would stick out 16mm from stock) R: 19 x 10 et 20 (this would stick out 9mm from stock)
	Appreciate 0 Quote

02-22-2010, 03:33 PM	#3
duk ///M 158 Rep 3,195 Posts Drives: 2011 AW/FR 6MT E92 Join Date: Jun 2007 Location: Irvine, CA iTrader: (0)	i am too interested in this setup! in diamond black! __________________ 2011.5 AW/FR E92 M3 6MT
	Appreciate 0 Quote

02-22-2010, 03:59 PM	#4
RENN Spec Major 141 Rep 1,314 Posts Drives: 488 Pista, M2CS, Tundra Join Date: Jul 2009 Location: Arcadia, CA iTrader: (3)	19x9.5 + 25 19x10 + 20 Currently only DSK color available. THe 19x8.5 +13 will be just as aggressive as the 19x9.5 +25 but without the lip.
	Appreciate 0 Quote

02-23-2010, 02:59 AM	#7
ooowowizstev Brigadier General 141 Rep 4,903 Posts Drives: '08 E92 M3 Join Date: Jul 2008 Location: Los Angeles, Irvine iTrader: (4) Garage List 2008 BMW E92 M3 [10.00]	Congrats, DBK ftw. Would love to see them in person when you do get them. __________________ '08 E92 ///M3 - AW/BLK/CF, M-DCT, 19's H&R, Vorsteiner, Eisenmann, BMC, BBS More to come...
	Appreciate 0 Quote

02-23-2010, 10:31 AM	#9
M3_LIN LM-R Whore. 125 Rep 854 Posts Drives: 2009 White M3 Sedan Join Date: Apr 2009 Location: LA iTrader: (1)	i would run my setup. But im not sure if you want 20s or not. The specs are on my sig! Ed Lin __________________ 09AWE90M: Light headlight tint, Full front end clear bra wrap(Harris@InstyleGraphics), Ceramic tint(40%), Piaa GTX H3 bulb, HID 8k AE, 6k Low, INT Luxer1 lights, RD springs, LMR 20X9 +8, 20X10 +18 (Dave @ Status), Vertice CF hood Ducts(Dat @ VertexUSA), Tecnocraft FULL Envy Intake system+plenum(KEVLAR)+cabin filter covers, Meister GTC exhaust, Arkym F LIP.
	Appreciate 0 Quote

02-27-2010, 06:39 AM	#13
Poofyo101 Major 56 Rep 1,250 Posts Drives: e92 ///M3 Join Date: Apr 2009 Location: NC iTrader: (9) Garage List 1988 BMW M3 [0.00] 1988 BMW M3 [0.00] 2012 BMW M3 [0.00] 1990 BMW M3 [0.00]	^^those are 19s? __________________ 12 E92 M3-AW/FR-20" BBS LM-Painted Reflectors-BMW Gloss Black Grills + Gills-BMW Performance LED Wheel-BMW Carbon Performance Spoiler-Akra Evolution-Stoptech Trophy
	Appreciate 0 Quote

02-27-2010, 11:21 AM	#14
jrAdiRon DaStig 53 Rep 479 Posts Drives: e92 M3 Join Date: Sep 2008 Location: Los Angeles iTrader: (2)	do you have pictures of the diamond black version?
	Appreciate 0 Quote

02-27-2010, 11:25 AM	#15
Johnny Lin Lieutenant General 832 Rep 11,307 Posts Drives: AW E92 M3 Join Date: Apr 2006 Location: Bellevue, WA iTrader: (42)	Here is a buddy of my with his AW E92 M on a Diamond Black 20" Ercisson Offset BBS LM-R and the Red BBS Studs and Lugs. He got a great deal from RennSpec.
	Appreciate 0 Quote

02-27-2010, 02:56 PM	#16
jrAdiRon DaStig 53 Rep 479 Posts Drives: e92 M3 Join Date: Sep 2008 Location: Los Angeles iTrader: (2)	Very nice!
	Appreciate 0 Quote

03-01-2011, 12:09 PM	#18
Victory Road Major 113 Rep 1,323 Posts Drives: BMW Join Date: Jun 2009 Location: Chicago, IL iTrader: (6)	Agreed. Diamond Black LM-R with BBS Red Caps, and BBS Japan Red lug nut kit.
	Appreciate 0 Quote

03-01-2011, 04:02 PM	#19
tha_good_life Brigadier General 376 Rep 4,089 Posts Drives: 21 X6MC Join Date: Jul 2008 Location: Seattle iTrader: (22) Garage List 2021 BMW X6MC [10.00] 2010 BMW M3 [8.68]	LM-R are pure sex if you get the right fitment!
	Appreciate 0 Quote

03-02-2011, 10:19 AM	#20
GTM_Challenge 272 Rep 2,946 Posts Drives: E46 M3, E90 M3 Join Date: Jan 2010 Location: Nashville iTrader: (7)	The 20in ericsson spec LM-R are probably the most aggressive and have the biggest lips. Those are my personal favorites
	Appreciate 0 Quote