 |
|
 |
|
|
|
| 10-11-2009, 07:27 PM | #1 |
|
Major
 43
Rep 1,210
Posts |
bills742's Jet Black M3 by ZAXJAX
CG CWG
Meguiar's Clay I used a rotary for paint correction Menzerna Powerfinish - left very little marring on a white pad Menzerna 106FA on blue but still left marring I switched to my PC to finish Menzerna 106FA worked great and finished perfect 1 coat of Collinite 476 and 1 coat of Collinite 845 Wheels were cleaned with P21S TAW and dressed with Meguiar's Endurance Gel Glass was cleaned with Stoner's Engine was cleaned with Simple Green and dressed with 303 Aerospace Protectant I didn't take a lot of before pics because it was pitch dark out when Adnan dropped the car off. This is one sick M3 and I was glad to have the opportunity to take care of it. This is what I had to start with after a wash  Rotary Swirls from a previous detail  More rotary marks  Water etching and swirls  After hood  Fender polished  Trunk lid before   After    Rear quarter panel After shots      Engine before   Engine after    More after's   
__________________
|
| 10-11-2009, 07:28 PM | #2 |
|
Major
43
Rep 1,210
Posts |
       
__________________
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
