|
|
08-25-2012, 03:41 PM | #1 |
ORNGBLD
32
Rep 436
Posts |
Mineral Spots...ugh
I have well water and its leaving mineral deposits on my paint. I didnt have time to go too aggressive, but tried some Menzerna 4500 and that wouldnt take them off. Nanoskin would not either. What products do you recommend? Thanks.
Dave Last edited by Let It Rein; 08-26-2012 at 08:38 AM.. |
08-25-2012, 06:38 PM | #2 |
Private First Class
5
Rep 105
Posts |
Could not find the link on CG's website, this works and you will need gloves and elbow grease but it is going to remove the mineral etch.
http://www.autogeek.net/chemical-guy...t-remover.html Last edited by AutoCon; 08-26-2012 at 01:41 AM.. |
Appreciate
0
|
08-25-2012, 08:38 PM | #3 |
So Kewl Guy
48
Rep 619
Posts |
I use meguiars rubbing compound. But I also keep a thick layer of wax on the car to keep the spots from digging in. Nice, shiny, and slick too!!
__________________
2010 E93 M3 / MS Catless X-Pipe / AA Catback / Vorsteiner Vented Hood and Bootlid E93 Trunk / ADV1 7.1 Wheels GB / LS3 LED Lights / Harrop Supercharger
|
Appreciate
0
|
08-26-2012, 08:38 AM | #4 |
ORNGBLD
32
Rep 436
Posts |
Thanks for the responses. My question is, should I use the Menzerna 1500 I have with an orange or yellow pad or just order some CGs stuff. Kind of disappointed that the Power Lock didnt help protect better than it did.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|