|
|
01-30-2013, 08:05 PM | #67 |
Second Lieutenant
36
Rep 240
Posts |
Hmm surprised there is no red wire...!?! I've done three now all had the red wire.
__________________
|
Appreciate
0
|
01-31-2013, 03:23 AM | #68 |
Private
20
Rep 71
Posts |
thats my problem
Umnitza said i must only connect the little white box at the OEM H8 bulb... but the box only hat a white and brown wire ,you see on the picture ?! so there is no red one? the only red cables are at the wiring harness from umnitza... ?! if i turn the white and brown from the box at OEM bulb the angle eyes turn on , of course... but what is when i turn on the low beam ? the angle eyes dimm and the orion v2 should turn of ? do they? there undercharged ? |
Appreciate
0
|
01-31-2013, 04:26 AM | #69 |
Private First Class
8
Rep 135
Posts |
there's only a positive and negative coming from the box (brown or red; brown or white). Tap into the OEM angel eye positive and negative cables.
|
Appreciate
0
|
01-31-2013, 04:28 AM | #70 | |
Private First Class
8
Rep 135
Posts |
Quote:
|
|
Appreciate
0
|
01-31-2013, 05:41 AM | #71 |
Private
20
Rep 71
Posts |
no that was my question because the OEM angle eyes have a dimm function?
and SMD cannot dimm ?! so that was my question where i turn in + ??? to the h8 OEM bulb wire or on the yellow cable at the xenon low beam? (it is the yellow to the xenon callet?) thx very much |
Appreciate
0
|
01-31-2013, 08:46 AM | #72 |
Second Lieutenant
36
Rep 240
Posts |
I didn't hook up red anyway on mine. They still dim as they are supposed to when the headlights come on and function as normal. I wired it by breaking apart the stock H8 bulbs. Get some pliers, cover the blub in paper towel, and crush it. Remove all the glass and the metal circle piece at the base and there will be two long metal pieces exposed, I soldered the brown and white connections there and then the kit is plug-and-play.
You will have to test which side goes on the left or right for brown and white, so make sure you don't screw that up!
__________________
|
Appreciate
0
|
01-31-2013, 12:44 PM | #74 |
Second Lieutenant
36
Rep 240
Posts |
Yup! Dims to about 70% when the headlights come on.
__________________
|
Appreciate
0
|
01-31-2013, 12:57 PM | #75 |
Private
20
Rep 71
Posts |
ok perfect ,
than i can connect them easily with the two cable from the white box to the OEM h8 bulb... i thougt the orion v2 turn off if the dont get enough power thx very much i test it edit: but why do you have 3 cable? and why you connect it with the low beam? Last edited by Saschi; 01-31-2013 at 01:13 PM.. |
Appreciate
0
|
02-06-2013, 11:52 PM | #79 |
Private First Class
8
Rep 135
Posts |
BTW guys, i recommend not using epoxy if you glue the led engel eyes to the stock plastic tubes, mine are yellowing. looking for an alternative:
Bond 527 / Beacon 527 3M™ Universal Adhesive Clear |
Appreciate
0
|
02-07-2013, 12:14 AM | #80 |
Second Lieutenant
36
Rep 240
Posts |
Or you could do as I did and just paint the portion from the epoxy and up all black...
__________________
|
Appreciate
0
|
08-26-2013, 05:06 PM | #82 |
Lieutenant Colonel
104
Rep 1,529
Posts |
hey guys i know this is an old thread but could someone tell me if anyone has looked into which one looks better from this one and ae's that are completely round
__________________
Space Gray l 6MT l OSG LSD w/ VAC Race Diff Cover l Cobb e30 l Morr vs8.2 l UUC SSK w/ DSSR l VSRF Catless Dps l RPI Intercooler l CDV Removed l HID AE 8000k l ETS Catback l AST 5200 w/ Vorshlag Camber Plates l ER Dual Oil Coolers l Rear Camber and Toe Arms l K&N Drop In l Solid Tranny/Diff/Subframe Bushings l Bridgestone RE-11
|
Appreciate
0
|
09-22-2013, 04:15 PM | #85 |
Major
340
Rep 1,089
Posts |
Sorry, I can't answer your question but I do want to point out that your inner ring looks like it's their V2 version and not the V4's like the outer ring you have in the pic. You should contact whoever you bought them from and get the correct ring before proceeding.
|
Appreciate
0
|
09-22-2013, 04:32 PM | #86 | |
Banned
56
Rep 530
Posts |
Quote:
|
|
Appreciate
0
|
09-22-2013, 05:26 PM | #87 |
Major
340
Rep 1,089
Posts |
|
Appreciate
0
|
09-24-2013, 11:08 AM | #88 |
Second Lieutenant
5
Rep 260
Posts |
yes, they are V2. V4 has only more LEDs, but unfortonutaly the are not made in 4300k color. I just only wanted know, if the size of inner ring will fit instead of inner OEM. Coz Umnitza inner diameter is 10,5cm, an OEM is about 9.5cm, and there is not so much space in the headlight.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|