|
|
09-10-2015, 07:35 PM | #1 |
New Member
2
Rep 16
Posts |
HELP: Vorsteiner GTS-5 Bumper Install
What's up guys, I finally got around to repainting my car and the bodyshop guy seems to be puzzled about the fitment of my Vorsteiner GTS5 front bumper.
1. Does the black foam inserts that's attached to the bumper reinforcement, needs to be removed? 2. Also, does the outer corners of the bumper reinforcement bar needs to be trimmed? 3. What other mods needs to be done to fit this bumper? Since he's an older guy, he's afraid to mess with it.. It looks like I'll have to install it, along with the retractable front license plate holder. Thanks in advance for your help.. Install pics will be much appreciated. |
09-10-2015, 08:22 PM | #2 |
424 ASP
70
Rep 242
Posts
Drives: '11 AW E92 M3 ZCP
Join Date: Apr 2011
Location: Fort Myers, FL / Pittsburgh, PA
|
I have this bumper and did all fitting myself. You definitely need to either trim the foam (recommended) or remove all together. I don't remember having to do any trimming at the ends so I'd need to see what you are talking about specifically. Can you take a picture?
|
Appreciate
0
|
09-19-2015, 08:17 PM | #3 |
New Member
2
Rep 16
Posts |
^Thanks buddy.. I installed it today.
I opted to trim the foam inserts a little, rather than removing it altogether. I think by having the form insert, i think it gives the bumper a little cushion just in case someone backs into it. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|