|
|
03-31-2013, 04:20 PM | #1 |
Private
20
Rep 66
Posts |
V1 Hardwire Issues
I am having a bit of trouble hardwiring my valentine 1 and can't figure out t he issue. I have done this in my e46 and e60 in 15min but this damn e92 has me stumped. I tapped into the dome light area with the green/white wire as in many guides, at first it would work but if i jiggled the wire it would disconnect as the tap didnt cut into the wire insulation enough so i pinched and retapped and can see its hitting well but every time i turn it on it just has all the lights on the v1 and makes a crazy clinking buzzing sound non stop but never turns on. I have tried to ground it to the visor posts with the torx screw but same thing with whatever I do.
I don't have the original cig power to test to see if the v1 blew out or anything but i checked the fuse and its still good so I don't think so. Any ideas? |
03-31-2013, 08:09 PM | #2 |
BimmerPost Supporting Vendor
3387
Rep 7,542
Posts |
Don't wire it to the dome light. Most of the +12v wires up there are bus lines for the sunroof.
Use a fuse tap and put it in the glovebox and run the wire up the A pillar.
__________________
-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |----- ----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133---- |
Appreciate
0
|
04-01-2013, 12:57 PM | #3 |
BimmerPost Supporting Vendor
307
Rep 13,093
Posts
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas
iTrader: (45)
Garage List 2013 Nissan GTR [0.00]
2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00] |
|
Appreciate
0
|
04-01-2013, 10:24 PM | #6 |
Major General
530
Rep 6,149
Posts |
__________________
If you will be purchasing ANY AT&T services online or in store could you mention that you were referred by me? My Employee Referral ID is eo4489. This would be a great help and it costs you nothing, thank you!
|
Appreciate
0
|
04-02-2013, 12:43 PM | #9 |
BimmerPost Supporting Vendor
307
Rep 13,093
Posts
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas
iTrader: (45)
Garage List 2013 Nissan GTR [0.00]
2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00] |
|
Appreciate
0
|
04-02-2013, 02:14 PM | #12 |
BimmerPost Supporting Vendor
307
Rep 13,093
Posts
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas
iTrader: (45)
Garage List 2013 Nissan GTR [0.00]
2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00] |
|
Appreciate
0
|
04-02-2013, 05:14 PM | #13 |
BimmerPost Supporting Vendor
3387
Rep 7,542
Posts |
Definitely don't power from OBD because +12v on obd pin 16 is not switched, and you don't want to add draw there.
__________________
-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |----- ----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133---- |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|