▀▄ eas | Macht Schnell - Competition Wheel Spacer kits for BMW

[brandon @ eas]

In order to give your BMW a much more aggressive stance while increasing handling, we offer our line of Macht Schnell Competition Spacer Kits.



Machined from 6061-T6 aerospace aluminum, these adapters are strong as well as lightweight to limit unsprung/reciprocating weight for maximum performance on or off the track. Spacer edges are also chamfered to allow for easy installation/removal if needed. After machining, the spacers are then anodized for additional strength, anti-corrosion & wear resistance.

Here is a recent article in European car:



-An additional online article in European car's Tech section:

http://www.europeancarweb.com/tech/e...gineering.html

-Macht Schnell spacer reference thread with photos and spec details:

http://www.m3post.com/forums/showthr...schnell+spacer

-Macht Schnell DIY on how to properly install spacers:

http://www.m3post.com/forums/showthread.php?t=272915

A wider track stance increases lateral stability as well as giving your BMW a much more aggressive appearance after installation. Spacers also are used to correct wheel gap normally seen on otherwise stock suspension setups, pushing the wheels outward - filling the fenders.

Included with our Competition Wheel Spacer Kits are a full set of extended lug bolts in black OEM finish. All wheel fasteners are hardened and tempered to strength class 10.9 or 10 according to DIN/ISO standard 898 and meet the statutory requirements of all countries - including the US.

Competition Wheel Spacer kit Features:
- Machined from 6061-T6 aerospace aluminum
- Chamfered edges allows installation & removal quick and easy
- Black anodized finish for additional strength and corrosion/wear resistance
- Improve handling by reducing body roll with a wider wheel base
- Included black extended-length corrosion-resistant wheel fasteners


Macht Schnell - Competition Wheel Spacer kit for BMW - 03mm
http://www.europeanautosource.com/pr...oducts_id=2197


Macht Schnell - Competition Wheel Spacer kit for BMW - 05mm
http://www.europeanautosource.com/pr...oducts_id=2198


Macht Schnell - Competition Wheel Spacer kit for BMW - 10mm
http://www.europeanautosource.com/pr...oducts_id=2199


Macht Schnell - Competition Wheel Spacer kit for BMW - 12mm
http://www.europeanautosource.com/pr...oducts_id=2200


Macht Schnell - Competition Wheel Spacer kit for BMW - 15mm
http://www.europeanautosource.com/pr...oducts_id=2201


Macht Schnell - Competition Wheel Spacer kit for BMW - 18mm
http://www.europeanautosource.com/pr...oducts_id=2202

Models Supported:
2008+ 1-series
1992+ 3-series, including M3 (e36, e46, e90, e92)
2004+ 5-series, including M5 (e60)
2005+ 6-series, including M6 (e63, e64)
2004+ X3 (e83)
2000+ X5 (e53, e70)
2003+ Z4, including M-Roadster/Coupe (e85)
2001-2003 Z8
1996-2002 Z3, including M-Roadster/Coupe

All sizes are currently in stock and available for immediate shipment.

[brandon @ eas]

Installed spacers on this beast:

[brandon @ eas]

All sizes in stock, including 20mm!

[EAS]

Orders have been processed and ready to ship out today!

[EAS]

All PMs have been replied!

[tom @ eas]

All sizes in stock and inquiries replied.

Thanks for choosing the best - orders will be shipped out first thing Monday morning.

[xchosun1x]

looking for a set of 5mm and 10mm shipped to 91101

thanks

[EAS]

Originally Posted by xchosun1x

looking for a set of 5mm and 10mm shipped to 91101

thanks

PM coming your way

[EAS]

All orders have been processed and shipped.

[EAS]

PMs have been replied!

[AWFRM3]

I posted this in the Cosmetic forum but didn't get any responses.

For OEM 19's on stock suspension, I'm having trouble deciding between 18mm front/15mm rear, or 15F/12R. In some pics, the 18/15 looks flush, but in other pictures, it looks like it sticks out a bit past the top of the fender.
On the other hand, in some pics the 15/12 looks flush, but in other pics, it looks not quite flush. What do you recommend? Thanks in advance.

[david @ eas]

Originally Posted by AWFRM3

I posted this in the Cosmetic forum but didn't get any responses.

For OEM 19's on stock suspension, I'm having trouble deciding between 18mm front/15mm rear, or 15F/12R. In some pics, the 18/15 looks flush, but in other pictures, it looks like it sticks out a bit past the top of the fender.
On the other hand, in some pics the 15/12 looks flush, but in other pics, it looks not quite flush. What do you recommend? Thanks in advance.

We have a spacer reference thread that we listed on the first post... Here's the link:

http://www.m3post.com/forums/showthr...schnell+spacer

I suggest going with 15mm-12mm mainly because that's just my preference, but 18-15mm is extremely flush and we've seen a number of forum members run with this as well. It's all up to you!

[AWFRM3]

Originally Posted by jurrian @ eas

We have a spacer reference thread that we listed on the first post... Here's the link:

http://www.m3post.com/forums/showthr...schnell+spacer

I suggest going with 15mm-12mm mainly because that's just my preference, but 18-15mm is extremely flush and we've seen a number of forum members run with this as well. It's all up to you!

Thanks, yes, I've reviewed those reference thread pictures closely, and that is what makes the decision difficult, for the reasons I described in my previous post.

I am going to need new tires pretty soon, and will likely upsize with the Vreds, 255 and 275, so do you think I should for sure go with the 15/12? I've heard the Vreds are pretty square cornered, plus the upsize.

[EAS]

Originally Posted by AWFRM3

Thanks, yes, I've reviewed those reference thread pictures closely, and that is what makes the decision difficult, for the reasons I described in my previous post.

I am going to need new tires pretty soon, and will likely upsize with the Vreds, 255 and 275, so do you think I should for sure go with the 15/12? I've heard the Vreds are pretty square cornered, plus the upsize.

I would say go with 12/10 if you are running square cornered tires just to be on the safe side and prevent rubbing

[tha_good_life]

how much for 12mm shipped to 98101?

[brandon @ eas]

Originally Posted by bapesta206

how much for 12mm shipped to 98101?

The price can be found here: http://www.europeanautosource.com/in...ath=67_203_394

If you are in CA, there will be tax added to the order.

Shipping via UPS will generally run about $10

[brandon @ eas]

Spacers are officially back in stock!

[Nate@IND]

Originally Posted by brandon @ eas

Spacers are officially back in stock!

best ones on the market!

[brandon @ eas]

All sizes in stock and orders placed before 5pm PST will ship today!

[brandon @ eas]

Thanks for the orders, all PM's replied. Here are some shots of a 2010 e92 335 M-Sport with 10mm rear spacers and 12mm front spacers:

[david @ eas]

Got more in stock guys! Get your orders in now!

[EAS]

Plenty of sizes in stock, order your spacers today!