Sponsored by The Tire Rack

[M3ANMACHINE]

Originally Posted by orteeze

<-- Newbie

Looking at a square setup for my NON M3 E92. Are the fender clearances different on a M3 and stock e92? I see you guys running big tires up front. I already ordered a set of 19x9.5 et33 all the way around. I have a full set of 255/35/19. Can't find anything showing if they'll clear or rub.

Any insight?

You should head over to e90post as they will likely be able to help you with this. The fenders on the m3 are much larger than the regular 3 series.

http://www.e90post.com/forums/forumdisplay.php?f=12

[ByeFelicia]

KW Sleeve Kit
Rears are maxed low.
Fronts are not but forgot exact positioning

OEM ZCP
Macht Schnell 18/15
OEM Continentals

No Rubbing whatsoever

[Buryat]

Looking for te37 9,5 et22 and 10,5 et20. Need some advices - what do you think about 265(255)/40 in front and 285/35 in rear? Stock suspension.

Now I'm using 20' Vorsteiner 255/30 front and 305/25 rear - no rub.

[SkyNet]

I am thinking about getting an E90 M3. I have this wheel/tire combo from my old car and I'm wondering if these will fit or if I need to sell the set:

Tire: P235/55R19
Wheel: 19x8.5

Thanks in advance.

[z3papa]

Originally Posted by SkyNet

I am thinking about getting an E90 M3. I have this wheel/tire combo from my old car and I'm wondering if these will fit or if I need to sell the set:

Tire: P235/55R19
Wheel: 19x8.5

Thanks in advance.

What is that from a truck or SUV? That tire has to have a diameter of something close to 29" and as such would not fit.

[SkyNet]

Its from a 2011 Camaro SS but I believe it is a "light suv/truck" winter tire.

[Dave07997S]

VMR V810 19X10 ET25 and 19X11 ET25 wheels, Michelin PSS 275/30/19 and 295/30/19 no rubbing at all with OEM ZCP suspension.

[Antonio1988]

19x9.5 +22 -- 265/35/19
19x10.5 +22 -- 295/30/19

Lowered on H&R

Does anyone know if this will rub? Thanks in advance!

[Antonio1988]

Anyone?

[Etienne8217]

Hi!

I have a 2011 M3 with stock suspension
I'm planning on getting:

B&G Springs (1inch drop in front and .5inch in the back)
19x10 ET 20 Square Forgestar F14 SDC
275/30/19 Front and 295/30/19 Rear Michelin PSS

Will it rub??

Thanks for your help guys!

[Dave07997S]

Originally Posted by Etienne8217

Hi!

I have a 2011 M3 with stock suspension
I'm planning on getting:

B&G Springs (1inch drop in front and .5inch in the back)
19x10 ET 20 Square Forgestar F14 SDC
275/30/19 Front and 295/30/19 Rear Michelin PSS

Will it rub??

Thanks for your help guys!

I think you are OK with rubbing, however, a 295 tire on a 10" wide wheel isn't optimal. If you are going to order a set of Forgestar's you might as well get the optimal width for the tires. You should go to at least a 10.5" for a 295 tire.

Dave

[Etienne8217]

Originally Posted by Dave07997S

I think you are OK with rubbing, however, a 295 tire on a 10" wide wheel isn't optimal. If you are going to order a set of Forgestar's you might as well get the optimal width for the tires. You should go to at least a 10.5" for a 295 tire.

Dave

Thanks for the advice!
The black chrome finish is only in 19x10 ET20...
Since the PSS are a little bit wider, what do you think of 265/30 in front and 275/35 in the back?

[purpl3ish]

have my wheels on order from forgestar, what would you guys recommend for this setup on a stock suspension setup on an E93

F14 SDC

19 x 9.5 et 13 front
19 x 11 et 25 rear

[purpl3ish]

bump! my wheels are coming soon, need help!

[willbowe]

anyone know if

9.5x19 et25

10.5x19 et25

will rub on

255/35/19 PSS

and

295/35/19 pss

lowered on eibach sport

also anyone recommend a different tire that pss?

thanks!

[alam24]

Originally Posted by ChOy BoY

bump! my wheels are coming soon, need help!

Although I don't have the same exact specs, I have something similar in sizing.

My F14 SDC are 19x10 et 15 front 265/30/19 and 19x10 et 5 Rear 275/30/19 on max low settings with KW Sleeves. My rears were barely rubbing but after I got an alignment and dialed in some neg camber I wasn't rubbing anymore.

Fronts are okay with a 265/30 and the rears you should have room for a 285-295 tire especially if you're on stock suspension. Good luck

[pzzvv]

I'm very late to post this, but figured I might as well now anyways

Wheels: Stock 19" 220's
Spacers: 15F/15R
Tires: 265/35/19F/R Blizzaks

On stock suspension

Rub in the front when turning, especially when maxing the turn out. Rub in the back on occasion.

[purpl3ish]

Originally Posted by alam24

Although I don't have the same exact specs, I have something similar in sizing.

My F14 SDC are 19x10 et 15 front 265/30/19 and 19x10 et 5 Rear 275/30/19 on max low settings with KW Sleeves. My rears were barely rubbing but after I got an alignment and dialed in some neg camber I wasn't rubbing anymore.

Fronts are okay with a 265/30 and the rears you should have room for a 285-295 tire especially if you're on stock suspension. Good luck

thanks for the input! i actually wound up going with 245/35 for the front and 285/30 for the rear ! can't wait to get these things on

[amellis]

Just adding to the general consensus...
Car: '11 E92 Competition Package
Wheels: ZCP
Tires-Front: 255/35/19 Michelin Pilot Super Sport
Tires-Rear: 275/35/19 Michelin Pilot Sport A/S 3

No rubbing front or back

[squartus]

Originally Posted by Buryat

Looking for te37 9,5 et22 and 10,5 et20. Need some advices - what do you think about 265(255)/40 in front and 285/35 in rear? Stock suspension.

Now I'm using 20' Vorsteiner 255/30 front and 305/25 rear - no rub.

Im running te37 sl 9.5 et22 10.5 et20 rear with 275/35/18 and 315/30/18
Stock suspension zero rub.

[Buryat]

Originally Posted by squartus

Im running te37 sl 9.5 et22 10.5 et20 rear with 275/35/18 and 315/30/18
Stock suspension zero rub.

Do you have more photo?

[squartus]

Yea ill put up a few more, if you want to see something specific let me know and ill take more pics.