Eibach Pro-Kit Installed

MarksM3 · 07-09-2013, 02:59 PM

Love the stance, looks great!

SYZ · 07-10-2013, 07:06 PM

Quote:

Originally Posted by Ben Ingraham

Ah ok. Then +1 to you for not having to deal with that. I have to find out how to fool the sensor now.

What do you mean by fool the sensor??

CliffJumper · 07-10-2013, 07:52 PM

Any rubbing or notice any difference in turn-in w/ the spacers?

Ben Ingraham · 07-10-2013, 10:58 PM

I wrote that before I ready the thread about the rear leveling sensor.

Curt2000 · 07-12-2013, 02:16 PM

Quote:

Originally Posted by CliffJumper

Any rubbing or notice any difference in turn-in w/ the spacers?

No rubbing, not sure about a difference in turn in, maybe a little more noticeable oversteer.

RingMeister01 · 07-12-2013, 03:24 PM

Aaaahhh I love that color!

lsmkr01 · 07-18-2013, 10:07 AM

Car looks amazing

misfitHERO · 08-16-2013, 07:16 PM

did the eibach profit require a camber kit?

Wendall · 08-16-2013, 07:29 PM

Eibach Pro Kit has the best ride height. Camber plates are not necessary, unless you want them.

Curt2000 · 08-17-2013, 01:45 PM

Quote:

Originally Posted by misfitHERO

did the eibach profit require a camber kit?

No, I took it to a pro alignment shop afterwards installing it and they told me the car was still within factory spec. Of course I had them tighten it up to racing spec

misfitHERO · 08-17-2013, 10:04 PM

Biggynuts01 and curt2000 thanks

Someone? · 09-04-2013, 09:58 PM

So how is the ride quality, and does the car handle A lot better ( spring performance, Not spacer)

Curt2000 · 09-04-2013, 10:55 PM

Quote:

Originally Posted by ibmike

So how is the ride quality, and does the car handle A lot better ( spring performance, Not spacer)

ride quality is unchanged IMO, handling is a bit stiffer and a little less feeling of body roll.

JTO24 · 09-05-2013, 08:53 AM

Looks great!

lutfy · 09-23-2013, 12:47 PM

Quote:

Originally Posted by biggynuts01

Eibach Pro Kit has the best ride height. Camber plates are not necessary, unless you want them.

I did search and found some conflicting info hence the question.

I see that most folks do Eibachs with E36 M3 bumpstops and then modifying the strut hats (shaving it). I have Ground Control Camber Plates with the stock system. Intend to use Pro Kit. In this case, with the E36 bumpstops and running GC plates be okay (especially since I cannot modify/reduce height)?

Thanks in advance.

Regards,

Lutfy

blast1st · 10-14-2013, 03:22 PM

did the front settled in or is it still higher than the back?!

Curt2000 · 10-15-2013, 01:41 AM

Quote:

Originally Posted by JTO24

Looks great!

Quote:

Originally Posted by lutfy

I did search and found some conflicting info hence the question.

I see that most folks do Eibachs with E36 M3 bumpstops and then modifying the strut hats (shaving it). I have Ground Control Camber Plates with the stock system. Intend to use Pro Kit. In this case, with the E36 bumpstops and running GC plates be okay (especially since I cannot modify/reduce height)?

Thanks in advance.

Regards,

Lutfy

GC uses Eibach springs for their kits so I'm assuming it will be OK, like I said before its a mild drop and even with the 15mm spacers up front I've had zero issues with rubbing. If you are runningt he shaved bumpstops and no spacers Im sure there will be no issues especially if you have camber adjustment capability.

Quote:

Originally Posted by blast1st

did the front settled in or is it still higher than the back?!

Yep thats just the way the kit sits, the spacers really help out with the appearance though. I was very pleased wiht the stance.

07-09-2013, 02:59 PM	#23
MarksM3 Registered 0 Rep 1 Posts Drives: E92 M3 Join Date: Jul 2013 Location: Ogden, UT iTrader: (0)	Love the stance, looks great!
	Appreciate 0 Quote

07-10-2013, 07:52 PM	#25
CliffJumper Private 7 Rep 91 Posts Drives: IB E90 M3 Join Date: Jul 2007 Location: Los Angeles iTrader: (0)	Any rubbing or notice any difference in turn-in w/ the spacers?
	Appreciate 0 Quote

07-10-2013, 10:58 PM	#26
Ben Ingraham On-Ramp Speedway Champion 204 Rep 981 Posts Drives: 2009 SS E90 M3 Join Date: Apr 2013 Location: Kansas iTrader: (17)	I wrote that before I ready the thread about the rear leveling sensor.
	Appreciate 0 Quote

07-12-2013, 03:24 PM	#28
RingMeister01 Croatian 884 Rep 3,613 Posts Drives: PORSCHE Join Date: Dec 2012 Location: NYC iTrader: (0) Garage List '18 Panamera Turbo [0.00] '17 991.2 Carrera G ... [0.00]	Aaaahhh I love that color! __________________ NARDO GREY '18 PANAMERA TURBO Ducati V4 S Corse (track only) Husqvarna FS450 (track only) Looking for an SUV
	Appreciate 0 Quote

07-18-2013, 10:07 AM	#29
lsmkr01 Lieutenant Colonel 42 Rep 1,629 Posts Drives: E92 M3 Join Date: Feb 2007 Location: SC iTrader: (0)	Car looks amazing
	Appreciate 0 Quote

08-16-2013, 07:16 PM	#30
misfitHERO Private 2 Rep 58 Posts Drives: 535i Join Date: Jan 2012 Location: new orleans iTrader: (0)	did the eibach profit require a camber kit?
	Appreciate 0 Quote

08-16-2013, 07:29 PM	#31
Wendall ***Major MammelToe 158 Rep 1,139 Posts Drives: E92 M3 SG coupe Join Date: Feb 2012 Location: Orange County, CA iTrader: (3)	Eibach Pro Kit has the best ride height. Camber plates are not necessary, unless you want them. __________________ E92 M3 SG DCT - AA Filter, Verstraβe Paddles, ECS SS, MH race stud, Stoptech BBK, MR Exhaust,RE Pulley, BPM Tune,Euro bumper and GTS lip, Euro MDM & DCT, KW CS, Recaro PP, TMS Soild Diff Mounts, MRF solid subframe mounts, GTS aero, RPM track built motor. Last edited by Wendall; 08-16-2013 at 07:58 PM..
	Appreciate 0 Quote

08-17-2013, 10:04 PM	#33
misfitHERO Private 2 Rep 58 Posts Drives: 535i Join Date: Jan 2012 Location: new orleans iTrader: (0)	Biggynuts01 and curt2000 thanks
	Appreciate 0 Quote

09-04-2013, 09:58 PM	#34
Someone? Perception is King 131 Rep 1,703 Posts Drives: M4 Join Date: May 2013 Location: Michigan iTrader: (8)	So how is the ride quality, and does the car handle A lot better ( spring performance, Not spacer) __________________ Perception and Reality are Two totally different Things.
	Appreciate 0 Quote

09-05-2013, 08:53 AM	#36
JTO24 never could compete with Lloyd Braun 5275 Rep 5,378 Posts Drives: 2022 G80 M3 6MT Join Date: Feb 2011 Location: South Jersey iTrader: (7)	Looks great!
	Appreciate 0 Quote

10-14-2013, 03:22 PM	#38
blast1st Test 115 Rep 1,707 Posts Drives: MDX as my daily @blast_1st Join Date: Aug 2011 Location: SO-CAL! iTrader: (1)	did the front settled in or is it still higher than the back?!
	Appreciate 0 Quote