BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > BIMMERPOST Universal Forums > General BMW News and Cars Discussion
 
BPM
Post Reply
 
Thread Tools Search this Thread
      06-21-2010, 09:49 AM   #199
MisterSkiMask
Banned
144
Rep
2,014
Posts

Drives: I Can not say
Join Date: Nov 2005
Location: you must not know

iTrader: (0)

Quote:
Originally Posted by Sniz View Post
almost......but the grin on my face will be more beautiful!!

here is the old exhaust wheel when I took my turbo apart

damage was from the PO...but I didnt realize it was like this when I bought it

Damn....that reminds me of the prop on my boat....after I did a bit of farming in shallow water

BTW, Awesome Build!
Appreciate 0
      06-21-2010, 11:36 AM   #200
drivr4life21
Registered
0
Rep
2
Posts

Drives: BMW X3 SAV
Join Date: Jun 2010
Location: New Jersey

iTrader: (0)

sweet ride! thats one hot car
__________________
"WHY?" should you care about State Farm's new website? Because monkeys with infrared sensors will hurt you if you don't (long story, just check the site): whyagent.com
*FYI, I'm helping spread this link around for State Farm
Appreciate 0
      06-22-2010, 03:25 PM   #201
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

new CHRA being installed







Adam getting all hot and bothered testing how well the new CHRA spins. Its MUCH MUCH smoother, easier, and quieter than the old one I traded in. Put a little oil inside before doing this but regardless.....I can only imagine how fast this is spinning when the engine is breathing in it.



__________________
Appreciate 0
      06-23-2010, 05:37 PM   #202
VinnieAces
Lieutenant Colonel
VinnieAces's Avatar
Canada
92
Rep
1,603
Posts

Drives: Imola Red Z4MC
Join Date: Apr 2010
Location: Ontario, Can

iTrader: (2)

Garage List
2006 Z4 M Coupe  [8.00]
awesome thread! subscribed

btw i dont know what happened to your old 335 but this e36 is definitely an upgrade!!! Its a classic for sure!
__________________
///M - Some Mods 'N Stuff
Appreciate 0
      06-23-2010, 08:01 PM   #203
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

Quote:
Originally Posted by VinnieAces View Post
awesome thread! subscribed

btw i dont know what happened to your old 335 but this e36 is definitely an upgrade!!! Its a classic for sure!

thanks!!!


and I agree


the smiles this car gives me the 335 could not hope to touch. didnt have the same....soul.


didnt
__________________
Appreciate 0
      06-25-2010, 11:19 PM   #204
positiveions
Lieutenant General
positiveions's Avatar
Lebanon
961
Rep
11,722
Posts

Drives: 19 Tacoma, 16 Golf wagon
Join Date: Sep 2007
Location: Upland, CA

iTrader: (2)

Garage List
SNIZ, this turns out to be a great project.
Appreciate 0
      06-29-2010, 11:24 PM   #205
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

I got around to installing the underpanel i picked up from motion motorsports a few weeks ago.

pretty easy install. On the TT stg II I had a few hangups w this underpanel but overall install was a success.

packaging was good, parts were all there and looked/felt like high quality/strong parts



and the panel, its a thick yet light cut of aluminum that is very rigid.....precision cut and drilled.



The before under shot of my car





some of the newest hardware to finds it way on the car

new chargepiping w Tial BOV by MA motorsports here in Baltimore, bunch of good guys there



TRM exhaust crank case check valve......has worked great so far!



My helpers holding the underpanel in place after removing the factory craptastic plastic porkchop things.......this underpanel fit perfect w the OEM front bumper and lip.



I was very happy to find that all my charge piping and the BOV cleared the panel and didnt require any triming.



HOWEVER the charge piping kept me from installing the 2 large brackets which give this underpanel even more strength. After speaking with Matt at Motion I decided to go ahead and install it anyway, it turned out to be really rigid even without those supports.

It ties into the fender liners and really helps solidify their positioning much better.

I'm happy with the product.






you can see from the photos that if anything this underpanel increases ground clearance by getting rid of the pork chop thingies.


I am hoping this will help a bit with my cooling issues and plan on adding baffling and weather stripping to seal it up more forcing more air into the radiator.

the drive home however didnt really reveal anything, other than 2nd gear is a hoot for drifting and the new CHRA is butter smooth :evil2
__________________
Appreciate 0
      06-29-2010, 11:59 PM   #206
MisterSkiMask
Banned
144
Rep
2,014
Posts

Drives: I Can not say
Join Date: Nov 2005
Location: you must not know

iTrader: (0)

looks good, how wide are those tires? they look huge in those pics
Appreciate 0
      06-30-2010, 06:22 AM   #207
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

Quote:
Originally Posted by MisterSkiMask View Post
looks good, how wide are those tires? they look huge in those pics
235's up front, not THAT huge at all.......ultra wide angle tends to stretch things.

hint: dont take pics of a girl with it if you want to any later.
__________________
Appreciate 0
      06-30-2010, 09:20 AM   #208
MisterSkiMask
Banned
144
Rep
2,014
Posts

Drives: I Can not say
Join Date: Nov 2005
Location: you must not know

iTrader: (0)

Quote:
Originally Posted by Sniz View Post
235's up front, not THAT huge at all.......ultra wide angle tends to stretch things.

hint: dont take pics of a girl with it if you want to any later.
Ahh, that makes sense. The cameras that are used by realtors to make small rooms look bigger perhaps?
Appreciate 0
      06-30-2010, 02:10 PM   #209
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

Quote:
Originally Posted by MisterSkiMask View Post
Ahh, that makes sense. The cameras that are used by realtors to make small rooms look bigger perhaps?
bingo, thats what I do for a living so thats a perfect example
__________________
Appreciate 0
      07-03-2010, 11:49 AM   #210
Crisp
Lieutenant Colonel
Crisp's Avatar
Albania
400
Rep
1,777
Posts

Drives: F95 X5M
Join Date: Jun 2008
Location: NYC

iTrader: (1)

Garage List
Quote:
Originally Posted by Sniz View Post
bingo, thats what I do for a living so thats a perfect example
Sick sick sick project.

I am very jealous.



Any chance you can put up a few videos of the car? I'd love to hear it ideling/accelerating.

Thanks.
__________________
Current F95 X5M; E60 M5 6spd; Mclaren 570s; Aston Martin Vantage; Ferrari FF
Appreciate 0
      07-06-2010, 10:46 AM   #211
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

Quote:
Originally Posted by Crisp View Post
Sick sick sick project.

I am very jealous.



Any chance you can put up a few videos of the car? I'd love to hear it ideling/accelerating.

Thanks.
hey sure

once this heat spell leaves ill be happy to

10am today amd 97 degrees.....F THAT
__________________
Appreciate 0
      02-23-2011, 05:41 PM   #212
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

Quote:
Originally Posted by Crisp View Post
Sick sick sick project.

I am very jealous.



Any chance you can put up a few videos of the car? I'd love to hear it ideling/accelerating.

Thanks.
finally videos!!!

I found the issue thats been plaguing me for the past year, my ceramic Magnaflow cat was crushed on the outside causing the ceramic catalyst to splinter into many pieces ruining its flow ability. Chocked the engine out up top as you will see from dyno graphs I'll post in a bit.

F cats!!!



==============

after removing the cat the car ran like a champ. Low boost on the wastegate spring pulled smooth and just built HP to redline. High boost pulled harder but didnt have the same fierce pull at higher RPMs. You'll see why.

======================


Always wanted a few pics of my car from the outside, now that it seems to be running happy I wanted to give it a shot.

Videos dont represent the volume of the exhaust, its a bit louder than these videos would lead you to believe.

================


at MIR today for a great drag racing rental. Took a break during a 30 minute cleanup session on the track to make some videos on the service road.

sorry tires......ive been nice until now.

watch in 720p

Burnout




Flyby.....I angered the dogs




Attempted launch




and what the exhaust looks like


__________________
Appreciate 0
      02-23-2011, 05:44 PM   #213
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

Ok so I finally got dyno proof that my car is indeed running much much better since removing that stupid clogged cat.

cp-e in Beltsville has an amazing facility full of top notch robotic machinery and rapid prototype machines to churn out top notch parts for BMW's, Mazda's, and others.

They also have a $100k Mustang dyno with the most ridiculous fan setup ive ever seen.......video's and photos cant do these fans justic. They deliver honest 65mph winds with extremely similar volume of air to the open road.


Photos from yesterday evening

Finally strapped down, an process that took almost an hour and a half. Reason for that is at the bottom of this post.







Time for action



================================================== ====================================


Here is my low boost dyno from before at MaxPsi.



and from today

this is on cpe's awesome Mustang Dyno, I have some great pics of their facility but cant get my 16gig sd card to read on my gf's older laptop

for reference, a stock 335 will dyno around 220-230 whp from what I was told. Typical dynojet for the same car will be 270-280whp.

dyno operator was very impressed w the power on low boost on this dyno.

car was at 347whp on low boost. For reference a modded GTR hit 382awhp on the same dyno. I believe the car has ~400whp on higher boost on this dyno in it with the current setup. Not sure what that will mean on a dynojet. It will be quick though, only weight 3195lbs w a 3/4 tank of gas.

please note runs were done til he hit the rev limiter......rpm scaling was off.



and video of the run



and higher boost

before at MaxPsi.......a terrible looking dyno chart even after NIckG pulled out all the timing in the trouble zone.



and today. Dips up top and then follows the low boost graph. Dyno operator who is also a tuner for cpe said it looks like timing is heavily reduced up top even before I told him NickG did that. Hope thats the case and all power will be back once ECU is reflashed w a standard map.

so much better than before. Need to play with boost controller to keep boost up in higher rpms....dropping almost 1.5psi throughout the rev band. the 35r at this psi should have NO problems with keeping boost steady or even slightly growing to redline.



low and high on same graph



video of high boost




all in all a good dyno evening though we did snap my vband clamp off the mid pipe getting it on the dyno.....a new clamp and 2x4's solved that issue lol.

car sounded mean as hell with an open exhaust though.

Will pull the ECU and send to NickG tomorrow
__________________

Last edited by Sniz; 02-23-2011 at 05:52 PM..
Appreciate 0
      03-08-2011, 01:58 AM   #214
LuvE82
Registered
0
Rep
2
Posts

Drives: E82 1
Join Date: Mar 2011
Location: CA

iTrader: (0)

Wow. Incredible stuff!!
__________________
Appreciate 0
      03-08-2011, 01:12 PM   #215
VinnieAces
Lieutenant Colonel
VinnieAces's Avatar
Canada
92
Rep
1,603
Posts

Drives: Imola Red Z4MC
Join Date: Apr 2010
Location: Ontario, Can

iTrader: (2)

Garage List
2006 Z4 M Coupe  [8.00]
Nice updates! Love this thread and the "red dragon" !
__________________
///M - Some Mods 'N Stuff
Appreciate 0
      03-09-2011, 07:21 PM   #216
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)



got the ECU back w the proper tune and the car rips to redline, feels great!

will get on a dyno in the next week or so I hope.

Pulled the turbo off the car (what a PITA) to have the exhaust housing gasket matched. Probably wont make any difference at all but who knows.





also relocated the Aquamist flow control to have a shorter run to the injector

__________________
Appreciate 0
      03-10-2011, 11:42 PM   #217
DubSport
Private First Class
DubSport's Avatar
Canada
17
Rep
190
Posts

Drives: 2008 E92 M3
Join Date: Mar 2009
Location: Calgary

iTrader: (1)

Amazing car, LOVE it. Would ditch me n54 for this in a heartbeat.
Appreciate 0
      03-13-2011, 07:31 PM   #218
Sniz
Lieutenant General
Sniz's Avatar
647
Rep
10,587
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

Hey all


I've started putting more time into detailing cars recently, just have too much fun with it not to do it more.

I was working on my car yesterday afternoon. the front end of the car was resprayed 2 summers ago when I hit a damned deer. Since then the orange peel left by body shop has been a thorn in my side.

NO MORE!

I finally decided to wetsand the peel out and polish.

Anyone living in the Maryland area feel free to shoot me a PM if you have any interest in detailing services from maintenance washes to full paint correction

wish I had brought my good camera for this, but the EVO4g actually does pretty good.

---------------------------------------------------

A reflection on my hood when I started, you can see it simply not a crisp, clear reflection. damned orange peel



Test section after wetsanding. Wiped clean and dried to see what the sanding has done.



Orange peel still evident on the outside of my sanding area.



Fully sanded down, smooth, no peel



Buffed the 2000 grit sanding marks out w M105, 2 passes and got this

much much better!!! I was so excited to see this result



side by side



Now the real work begins. Entire hood and front fenders need the same treatment



Sanded down, did some more touch up sanding after this photo



1/4 polished w M105



me hard at work, what a workout. I need an orbital. Flex will be on order soon I think.





Hood polished out w M105





Fender sanded



Fender polished



Then repolished w a finer polish to really bring out the depth and clarity

followed up w 2 coats of JetSeal applied w black pad.



gave 20 minutes for each coat to cure, spent that time detailing the interior.



Test pot of Dodo Juice, love this stuff. So easy to apply and remove, depth is incredible and beading it fantastic.



Done!



Now thats some clarity baby!! (actually a bit out of focus, thanks phone)



outside in the evening light, so good. Washed the rest of the car. Will polish to get rid of RIDS after 2 years of washing since last polish then give it the seal/wax.

__________________

Last edited by Sniz; 03-21-2011 at 08:29 PM..
Appreciate 0
      03-16-2011, 10:36 AM   #219
Alan l.
Major General
Alan l.'s Avatar
5279
Rep
8,742
Posts

Drives: 2020 F95 X5M Competition
Join Date: Jun 2009
Location: United States

iTrader: (9)

Dude i'm in love with your E36. So friggin hot
__________________
Appreciate 0
      03-16-2011, 11:21 AM   #220
MisterSkiMask
Banned
144
Rep
2,014
Posts

Drives: I Can not say
Join Date: Nov 2005
Location: you must not know

iTrader: (0)

Awesome work, as usual!

I've never had the balls to wet sand my paint.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:40 PM.




m3post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST