|
|
07-12-2010, 04:13 PM | #1 |
New Member
4
Rep 21
Posts |
Front PDC e92
hi all
i would like to present to You front pdc retrofit installed into front us bumber - i believe that's first ever made front pdc retrofit without euro bumper. |
07-15-2010, 02:49 AM | #5 | |
New Member
4
Rep 21
Posts |
Quote:
module pdc - control unit (front and rear pdc) - 66206982403 pdc sensors 66206934308 (black) pdc sensors rubber rings 66206923000 sensors holders - one for each sensor, center console switch, and you need to have also wire harness (communication - signal from front sensors to pdc module- control unit). This list is valid for my car - 2008 with navi professional. After installation the car has to be coded - by BMW SA or somebody with knowledge, software and hardware :-) Last edited by mariusz_ka; 07-15-2010 at 02:57 AM.. |
|
Appreciate
0
|
07-17-2010, 01:25 PM | #8 |
New Member
4
Rep 21
Posts |
It depends - if buy parts via ebay - is quite cheap:
sensors - 15 usd each pdc module - 125 usd centre console switch - 75 usd Parts that you probably will not buy on ebay and you have to buy from BMW SA: wire harness - 100 usd sensor holders - 3 usd each Installation cost me ca 200 usd - but it could be much more expensive in usa. Last edited by mariusz_ka; 07-17-2010 at 04:30 PM.. |
Appreciate
0
|
07-18-2010, 11:25 AM | #9 |
Private First Class
17
Rep 162
Posts |
Damn!! Nice looking and much cheaper than I would have thought for the parts!!!!
Did you have rear PDC already? I already have rear PDC. Will I need the control unit or will my current control unit already has the plugs for the front sensors (where the V socket goes to). Also, what is the center console switch for? I am guessing to put the system into PDC mode? For rear, it does it auto while in revere gear, but I guess for forward, it needs to know you want PDC. Is that right? Thanks for including the PDF!!!! Fantastic!!!!!
__________________
2010 M3 E92 Space Gray, Black Novillo
2MK,2MT,ZCW,ZPP,ZTP,302,5AC,4MZ,507,6FL,655,752,41 5,A52 Last edited by blueman2; 07-18-2010 at 11:59 AM.. |
Appreciate
0
|
07-18-2010, 11:50 AM | #10 |
New Member
4
Rep 21
Posts |
No - I installed front and rear.
Centre console switch is to turn pdc on and off. Yes you have to drill the bumber - but the holes are not cover - You have to be skilful to do it properly - then you needn't cover anything - my bumper wasn't even painted after this operation. |
Appreciate
0
|
07-18-2010, 11:58 AM | #11 | |
Private First Class
17
Rep 162
Posts |
Quote:
Seems like a DIY project for those with moderate skills. Only difficult part IMHO would be doing the bumper drilling to get a clean edge. After scouting out parts, and assuming I can use my existing control module, this appears doable for about $250 USD, excluding the coding. Very cheap if so!!!
__________________
2010 M3 E92 Space Gray, Black Novillo
2MK,2MT,ZCW,ZPP,ZTP,302,5AC,4MZ,507,6FL,655,752,41 5,A52 |
|
Appreciate
0
|
07-18-2010, 12:48 PM | #13 |
Major General
258
Rep 5,012
Posts |
Wonder how the front sensors were attached without the bumper having the tabs that locks them in place . Should have told bodyshop to delete those ugly reflectors .
|
Appreciate
0
|
07-18-2010, 01:13 PM | #14 |
New Member
4
Rep 21
Posts |
pdc holders has tape with glue - so it is easy to stick them in the place
to delete bumper reflectors - you need to have the hole bumper painted ... so I decide not to do it. |
Appreciate
0
|
08-03-2010, 06:05 PM | #15 |
New Member
0
Rep 7
Posts |
Anyone else done this for a 2011 M3 Convertible (or know if the thread applies?) I have rear PDC and would love to add front PDC.
Will the front PDC display on the screen just as the rear does? |
Appreciate
0
|
08-13-2010, 11:21 PM | #18 |
Second Lieutenant
64
Rep 269
Posts |
Did mine with the Euro front bumper. Got the bumper from ebay.co.uk for $175 bucks and 4 sensors from Spain for $75. Shipping sucked, but it's cleaner than ripping into the US bumper and it already has the clips you need for the sensors - pre-installed. Once properly coded the Front PDC will definitely show up on the screen.
|
Appreciate
0
|
08-14-2010, 04:07 PM | #19 |
Banned
620
Rep 2,013
Posts |
|
Appreciate
0
|
08-14-2010, 06:33 PM | #21 |
CMPULSV
20
Rep 359
Posts |
I need to do this...thanks for sharing!
__________________
2009 Alpine White DCT E92 M3 - Tint, Hood M Stripes, Eibach Springs,
Gloss Black Rims, Vorsteiner Lip, BMW Performance Trunk Spoiler Fabspeed x-pipe & Megan Race Exhaust 2006 Imola Red 6-speed E46 M3 - Retired |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|