G1 parts list

[Sconi Guy]

I just bought a used ESS G1 and the seller made me aware that there are a few parts missing. I was wondering if anybody has an actual parts list of the kit(perhaps came with a new kit), so that I could go through and see exactly what I need to order to complete the kit?

I realize that I can probably contact ESS directly and ask, but I thought I'd try here first. I'm not sure how receptive ESS would be to somebody who bought a used kit instead of new through them.

Thanks in advance.

[amrazM]

finally someone bought that g1 kit, post what you have here and we can help you source whats missing.

[Sconi Guy]

The seller was awesome and I got a screaming deal, at least as far as I'm concerned. He was straight forward and let me know that some parts were missing. I know for sure that I need to source a cooler. It has both the 91 and 93 pulley(93 is already on the blower). I have attached pics of what I have.

I already had a tune from Alex at Alpine, and am going to go with his add on. Best $300 I could spend. 😆

Thanks in advance for any help.

[Mr.Zisky]

E9x G1 Packing List.pdf

[Sconi Guy]

Originally Posted by Mr.Zisky

Attachment 3435723

Awesome. You rock! Thank you.

[Sconi Guy]

So now that I'm to step 49 and need to install the heat exchanger, any feelings on whether I should buy directly from ESS or is there a better aftermarket option?

[amrazM]

Originally Posted by Sconi Guy

So now that I'm to step 49 and need to install the heat exchanger, any feelings on whether I should buy directly from ESS or is there a better aftermarket option?

depends on your future plans with the car, there are larger aftermarket coolers or you can even run double coolers.

[Sconi Guy]

Since ESS wants almost $1000 for the cooler, I'm going to go aftermarket and just set it up myself, as it doesn't seem overly complicated.

I will have to get the air filter and hose from the intake from them though, which is a little pricey, but what can you do. 😄

I was wondering if the belt needed to drive the super charger is really anything special that I'd have to get through them or is it something that can be sourced somewhere else?

[Soden82]

Originally Posted by Sconi Guy

Since ESS wants almost $1000 for the cooler, I'm going to go aftermarket and just set it up myself, as it doesn't seem overly complicated.

I will have to get the air filter and hose from the intake from them though, which is a little pricey, but what can you do. 😄

I was wondering if the belt needed to drive the super charger is really anything special that I'd have to get through them or is it something that can be sourced somewhere else?

If your diligent you can get the belt off fcp euro. It’s a conti belt but I forget the part number. I went with a 2115 belt which is 5mm shorter off a Porsche cayman.

https://www.amazon.com/RU-1785-Unive...s%2C101&sr=8-1

This is the link to Amazon for the same filter from ESS, except it’ll ship faster and be cheaper.

[Sconi Guy]

Thanks. The filter will be here Saturday. 😃

Now to try and figure out the belt.

[Shrike360]

Well, that was lucky. This is the belt that was on my kit. Micro-V K060834 6PK2120

[Sconi Guy]

Thank you so much. Everybody has been awesome. I love this forum.

[Oreo Cat]

can you tell me what the part number is for the full injectors included with the SC

[Sconi Guy]

This is the box it came in.

[Oreo Cat]

Thank you!