19/9.5 Square Setup will it work?

jusbwn · 10-03-2012, 03:04 PM

I have an 11' m3 coupe standard package. Not lowered or cambered.

Will an 19/9.5 square set up rub?

I'm not worried about the rear due to the fact that the stock wheels are already 9.5.. More worried about rubbing in the front.

Thanks

BMW Fanatic · 10-03-2012, 03:08 PM

I run 10" rims up front with 265/30 tires. Offset is +22 I believe, no rubbing. ZCP stock height. So I'm sure you are good unless the offset is stupid low.

jusbwn · 10-03-2012, 04:21 PM

Any idea if a 15mm offset will be okay on the front?

Expert@ApexWheels · 10-03-2012, 06:00 PM

You can surely do a squared setup in 19x9.5" ET15. Depending on the tire sizes and tire brand you end up with, you may need to camber in the front a little bit (maxing out stock camber should be okay) in order for the front wheels to clear your fenders.

CT · 10-05-2012, 05:36 PM

As another data point, I'm running 19x9.5 ET24 on 265/35R19 with 15mm spacers in the rear on KW V3. No matter what suspension setting I'm on, the front tires scrub the rear portion of the fender liner at about halfway to steering lock.

1MOREMOD · 10-05-2012, 05:48 PM

i have 19x9.5 et 22 all the way around with ad08 265/30 no rubbing. i run a rear spacer just to give it a flush look.

Technic · 10-05-2012, 07:42 PM

19 x 9.5 ET27 - 275/30-19 squared (5mm spacer in front, 20mm spacer rear):

20 x 9.5 ET20 - 265/30-20 squared (14mm spacer rear):

No rubbing.

Julio Perez · 12-12-2012, 07:16 AM

Quote:

Originally Posted by Technic

19 x 9.5 ET27 - 275/30-19 squared (5mm spacer in front, 20mm spacer rear):

20 x 9.5 ET20 - 265/30-20 squared (14mm spacer rear):

No rubbing.

What rims are on the black one ?

Kwando · 12-12-2012, 07:35 AM

I think they're Morr

Technic · 12-12-2012, 08:42 AM

Quote:

Originally Posted by Julio Perez

What rims are on the black one ?

http://www.m3post.com/forums/showthread.php?t=657182

Raz335 · 12-12-2012, 12:35 PM

They're BC Forged. Very nice wheels

IND-Distribution · 12-12-2012, 02:39 PM

A 9.5 +15 offset in front will need some negative camber to clear, but it is possible. You should need about 3 degrees of negative camber to fit a 275 tire with a 9.5 +15 offset wheel.

M3PO · 12-12-2012, 06:04 PM

Quote:

Originally Posted by Ilia@IND

A 9.5 +15 offset in front will need some negative camber to clear, but it is possible. You should need about 3 degrees of negative camber to fit a 275 tire with a 9.5 +15 offset wheel.

I run a 10.5 +20 wheel and a 275 tire on the front with only 1.6 degrees of camber.

info@trinityautosport · 12-12-2012, 06:16 PM

just for reference, our IB M3 has 18x9.5 front with ET18, 285/35 tire mounted with -3.2 camber with no rubbing issues for the fenders.

shane060 · 03-30-2013, 06:42 PM

I am looking to run a 19x10 wheel et25 Square setup, I am on stock EDC suspension 11 M3 can anyone chime in about this rubbing or not? 265-30-19 275-30-19?

Either the above setup or 19x9-etc 18 and 19x9 et 25 with a 245-35/275-35?

10-03-2012, 03:04 PM	#1
jusbwn Enlisted Member 16 Rep 36 Posts Drives: Sold - E92 M3 Join Date: Feb 2012 Location: NJ iTrader: (0)	19/9.5 Square Setup will it work? I have an 11' m3 coupe standard package. Not lowered or cambered. Will an 19/9.5 square set up rub? I'm not worried about the rear due to the fact that the stock wheels are already 9.5.. More worried about rubbing in the front. Thanks
	Appreciate 0 Tweet Quote

10-03-2012, 03:08 PM	#2
BMW Fanatic Banned 135 Rep 3,293 Posts Drives: slow Join Date: Jul 2009 Location: Calgary iTrader: (11)	I run 10" rims up front with 265/30 tires. Offset is +22 I believe, no rubbing. ZCP stock height. So I'm sure you are good unless the offset is stupid low.
	Appreciate 0 Quote

10-03-2012, 04:21 PM	#3
jusbwn Enlisted Member 16 Rep 36 Posts Drives: Sold - E92 M3 Join Date: Feb 2012 Location: NJ iTrader: (0)	Any idea if a 15mm offset will be okay on the front?
	Appreciate 0 Quote

10-03-2012, 06:00 PM	#4
Expert@ApexWheels BimmerPost Supporting Vendor 3517 Rep 6,758 Posts Drives: M3 Join Date: Jun 2012 Location: Bay Area iTrader: (0)	You can surely do a squared setup in 19x9.5" ET15. Depending on the tire sizes and tire brand you end up with, you may need to camber in the front a little bit (maxing out stock camber should be okay) in order for the front wheels to clear your fenders. __________________ 925-245-0773 /// info@apexraceparts.com Wheels /// Accessories /// Vehicle-Specific Fitment Guides /// Careers
	Appreciate 0 Quote

10-05-2012, 05:36 PM	#5
CT GODXSPD 12 Rep 157 Posts Drives: SSII E90M Join Date: Jan 2010 Location: Georgia iTrader: (1)	As another data point, I'm running 19x9.5 ET24 on 265/35R19 with 15mm spacers in the rear on KW V3. No matter what suspension setting I'm on, the front tires scrub the rear portion of the fender liner at about halfway to steering lock. __________________ e90m / ssii / foxred / wedssport sa-55m 19x9.5 et24 + 265/35r19 square / 15mm rear spacer / no chrome
	Appreciate 0 Quote

10-05-2012, 05:48 PM	#6
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	i have 19x9.5 et 22 all the way around with ad08 265/30 no rubbing. i run a rear spacer just to give it a flush look. __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC bars\|GC race control arms\|GC bushings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster\|Euro header\|BW exhaust\|K&N c.a.i.\|Epic race tune\|Rouge pulleys\|Seibon CF hood\|CSL bumper\|apr gt 250 & splitter\|ST-40\|XR-2\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|BMWpedals\|BW studs\|
	Appreciate 0 Quote

10-05-2012, 07:42 PM	#7
Technic Lieutenant General 2281 Rep 12,997 Posts Drives: 2021 i3S, 2024 i4 M50 Join Date: Apr 2005 Location: Florida iTrader: (18)	19 x 9.5 ET27 - 275/30-19 squared (5mm spacer in front, 20mm spacer rear): 20 x 9.5 ET20 - 265/30-20 squared (14mm spacer rear): No rubbing.
	Appreciate 0 Quote

12-12-2012, 07:35 AM	#9
Kwando Major 431 Rep 1,428 Posts Drives: 2018 340i xDrive Join Date: Jan 2011 Location: London, Ontario, Canada iTrader: (1)	I think they're Morr
	Appreciate 0 Quote

12-12-2012, 12:35 PM	#11
Raz335 Major 53 Rep 1,162 Posts Drives: BMW M3 Convertible Join Date: Sep 2007 Location: LI,NY iTrader: (2)	They're BC Forged. Very nice wheels __________________ Jerez Black/Fox E93 M3 - Prem 2/Cold/Conv/DCT/EDC/19's/Ext Lthr/Crbn Trim/Enhanced Sound/Sat Mods- 20" BBS LM's DBK/Challenge Catback/Eibachs/Trim wrapped black/Lux Angel eyes/35% Tint
	Appreciate 0 Quote

12-12-2012, 02:39 PM	#12
IND-Distribution BimmerPost Supporting Vendor 9578 Rep 10,873 Posts Drives: G82 M4 / G87 M2 Join Date: Oct 2006 Location: Chicago iTrader: (3)	A 9.5 +15 offset in front will need some negative camber to clear, but it is possible. You should need about 3 degrees of negative camber to fit a 275 tire with a 9.5 +15 offset wheel. __________________ IND DISTRIBUTION \| 866-963-4520 • INSTAGRAM • YOUTUBE • FACEBOOK • FLICKR
	Appreciate 0 Quote

12-12-2012, 06:16 PM	#14
info@trinityautosport 281 Rep 7,518 Posts Drives: F13 M6 Join Date: Apr 2012 Location: Anaheim, CA iTrader: (0)	just for reference, our IB M3 has 18x9.5 front with ET18, 285/35 tire mounted with -3.2 camber with no rubbing issues for the fenders.
	Appreciate 0 Quote

03-30-2013, 06:42 PM	#15
shane060 Second Lieutenant 89 Rep 229 Posts Drives: 2015 M235 6spd 2011 M3 DCT Join Date: Nov 2009 Location: SA TX iTrader: (1) Garage List 2011 M3 [0.00]	I am looking to run a 19x10 wheel et25 Square setup, I am on stock EDC suspension 11 M3 can anyone chime in about this rubbing or not? 265-30-19 275-30-19? Either the above setup or 19x9-etc 18 and 19x9 et 25 with a 245-35/275-35?
	Appreciate 0 Quote