E93 PDC Front SW 18-Pin Socket Casing?

[Jonnnnn]

Hello,
I’m in the process of buying a 2013 E93, which doesn’t have front sensors. It does have the rear sensors.
Looking at this thread it explains really well how to do it….
https://www.m3post.com/forums/showthread.php?t=577851

In the thread it references the (no longer available) retrofit kit, and there’s an attached PDF.

I’ve found all the parts I need second hand (I think) apart from the
SW 18-pin Socket Casing

You can get them on eBay, E.g.
https://www.ebay.co.uk/itm/115799798...80fb22e1cf9b8e

My question is…. Will any 18-pin Socket Casing do the job or do I need one specific for PDC? Reason I ask is obviously certain pins will need wiring, so presumably I have to have one with the correct pins already wired to the connector? Or can they be required, if so how?

Thanks, Jon

[amrazM]

you just need the black version of the sw 18pin socket casing, I believe the white one is different. once you get the black it will work

[Jonnnnn]

Thanks for the reply.
I eventually found a cable and it did come with the black connecto.
Thank you for replying