|
|
10-18-2014, 03:45 PM | #1 |
Major General
1570
Rep 8,075
Posts
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Houston, TX
|
Ground Control Camber Plates for OEM Springs
This is a pair of ground control camber plates for OEM springs. There was an issue with early versions where the spot weld would break and the bolt would turn in the bolt plate. I have the upgraded plates from Cantrell Motorsports. Includes the articulating and thrust washers. The top plate is etched with my camber marking. You WILL have to replace the M8 lock nuts. These are 3 years old and have seen 10 track days and 25k miles. These plates have been pulled every year for cleaning/rebuilding. I pulled the rubber bushing and roller bearings. Cleaned and greased everything. It all turns nice and smooth like new. No clunking, clanging, sticking, jamming or issues. Install note...never did use the washer with the GC cut into it. Didn't fit. $300 shipped within the US. Paypal is kjd1976@live.com Pics of the bolt plate
__________________
2018 F30 320iX Melbourne Red
2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue |
10-19-2014, 10:05 AM | #2 |
Lieutenant
24
Rep 555
Posts |
I will take them if they will work with my KWV3's, I believe there are same size as stock id..
__________________
2010 E92 M3 AW/Blk Evolve SC Dinan DCT CF Roof-- 09 E93 M3 JB/FR 6spd--- 07 E63 M6 5.7l Stroker Dinan S3 SMG--15' F82 M4 AW/SO DCT-- 11' E82 1M
|
Appreciate
0
|
10-19-2014, 10:44 AM | #3 |
Major General
1570
Rep 8,075
Posts
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Houston, TX
|
Sold!!!
__________________
2018 F30 320iX Melbourne Red
2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|