Which system you using with 10inch wide rims??

[C2VNY]

Hey,

Trying to decide on coilovers but due to lack of support in the uk it's abit annoying.
Had my heart set on kw clubsport 3-way but no ones really telling me to try what you guys have done, just telling me get proper size wheels: or get spacers but I don't want spacers.

Wondering everyone that's running 18-10 +25 (275-35-18 pss )
Which coilovers system are you using that needs no shorter springs, no Spacers just fit, balance and geometry done??

cheers

[dcgolfdr]

I am running Motion Control from Bimmerworld and running street wheels 19x10, 19x11 and track wheels 18x10.5 running 275/35/18. I do have Ground Control camber plates but no rubbing, no spacers, no problems.

[M3ANMACHINE]

KW Clubsport and a 5mm spacer in front

[Richbot]

MCS here as well. No spacer needed with your proposed wheel setup.

[ailikesiliu]

For 18x10 +25, if u want a flush look, u have to add spacers, fronts are ok, but rears def need some spacers. If u do not care about the look, then no spacers needed. I am running 18x10 +25 all around with 275/35 NT01s, 5mm spacers in the front, 10mm in the rear, I think it is perfect. I have KW V3 with Vorshlag camber plates and running pretty aggressive front camber.

[ailikesiliu]

keep in mind, kw clubsport has helper springs, so the spring collar will sit lower compare to my v3, ur tires might rub the spring collar or spring itself, so i think if u are going with kw cs, a 5mm spacer for the front is a must, just to clear the inside.

[C2VNY]

Originally Posted by dcgolfdr

I am running Motion Control from Bimmerworld and running street wheels 19x10, 19x11 and track wheels 18x10.5 running 275/35/18. I do have Ground Control camber plates but no rubbing, no spacers, no problems.

but I was hoping to budget a little less due to newborn ..


Just fitted the wheels last night and even the stock struts are only around a finger away so am guessing as long as the coilovers doesn't have the longer spring and sits like stock it will all be fine.

I want the kw cs 3-way but just don't want to use spacers. Not trying to get extra stance just want a better suspension set up.

Waiting on TC-kline to reply and will try find out if nitron or ohlins dfv will fit.

Cheers

[dytrdr5]

I have 19x10 et 25 on tc kline coilovers and have a good amount of space between the wheel and the coilover

[M3ANMACHINE]

TCK's should be fine