|
|
01-15-2013, 09:38 PM | #1 |
Id rather be boating...
66
Rep 1,097
Posts |
My Headlight DIY Modification and the Journey
Well, work is finally slowing down enough for me to enjoy some hobbies again. On the chopping block right now are the ugly stock and chromed out headlights. I should have taken more pics of the headlight and bumper removal, but its fairly straight forward.
Well here's the first of the headlights. The outer shroud is actually vinyl wrapped in the vinyl I'm wrapping the car with. For those of you that hate the matte colors, heres one for ya. Its a matte charcoal metallic! Its as close to a frozen color as I've seen It looks amazing. Anyway. I'm slow, but will update with pics as often as time allows. I'll also give some explanation of the work thats been done. In this pic its just the new AE's are laid on top of the OEM ones and the outer shroud is vinyl wrapped. Nothing super complicated yet. Enjoy! Last edited by the_road_less_traveled; 01-19-2013 at 07:39 PM.. |
01-15-2013, 09:40 PM | #2 |
Id rather be boating...
66
Rep 1,097
Posts |
And I know someone is going to compliment on the fact that the vinyl doesnt conform to the pleats in the shroud. I was testing tonight to see if I could get vinyl to wrap right. Amazingly it does. This stuff if very workable.
|
Appreciate
0
|
01-15-2013, 10:09 PM | #3 |
Mr. Nice Says Hello
634
Rep 16,662
Posts
Drives: BMW M3 | X5 xdrive 35i MSport
Join Date: Dec 2008
Location: USA
|
very nice!
|
Appreciate
0
|
01-15-2013, 10:21 PM | #4 |
White Shark
86
Rep 919
Posts |
looking forward for this, using vinyl is a great idea
__________________
ESS | Challenge x-pipe | Akrapovic | Stoptech BBK (380/355) |Ohlins R&T | Dinan | Vorsteiner | Downforce USA | Varis Diffuser | Gintani | UUC | BMW Performance | Macht Schnell | Forgestar F14's SDC 19x9.5F 19x11R | 255.35 295.30
|
Appreciate
0
|
01-15-2013, 11:18 PM | #5 |
Lieutenant Colonel
163
Rep 1,506
Posts
Drives: '15 FO M4
Join Date: Sep 2010
Location: NorCal Bay Area
|
Aren't you worried that the heat inside the headlight will cause the vinyl to come loose?
__________________
Fire Orange F82 Built by Alekshop | Pure Stage 2 Turbos | Akrapovic Evolution and Downpipes | ESS T-500 Performance ECU Software | Evolution Racewerks Chargepipes | Gruppe M CAI | Awron Gauge w/ Valve Control | KW Clubsport | Brembo GT 380 F&R | 19" BBS FI-R | BMW Performance Seats, Aero, and Steering Wheel | Vorsteiner Diffuser | IND Cosmetics
|
Appreciate
0
|
01-16-2013, 08:42 AM | #6 |
BimmerPost Supporting Vendor
307
Rep 13,093
Posts
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas
iTrader: (45)
Garage List 2013 Nissan GTR [0.00]
2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00] |
Looks good. Any reason you didn't paint it? I have to agree with the above that vinyl may not have been the best choice.
|
Appreciate
0
|
01-16-2013, 12:19 PM | #8 |
Banned
41
Rep 2,009
Posts |
Ya def just spray paint it
And FYI most people remove the OEM glass tube from the OEM angel ayes If you want to get really crazy I know someone who can do some awesome stuff sithnLES angel eyes http://www.e90post.com/forums/showthread.php?p=13316339 |
Appreciate
0
|
01-16-2013, 01:25 PM | #9 |
Lieutenant General
7433
Rep 12,291
Posts |
+1 with heat concern. Isn't it going to bubble?
__________________
Current:
16 F82 M4 GTS, Black Sapphire/Black, DCT 08 E92 M3, Sparkling Graphite/Bamboo Beige, 6MT 07 E85 Z4M Roadster, Alpine White/Red, 6MT 99 E36 M3, Techno Violet/Dove Grey, 6MT |
Appreciate
0
|
01-16-2013, 07:07 PM | #11 |
Id rather be boating...
66
Rep 1,097
Posts |
As most suspect, it is risky on the outer shroud. I dont expect that the shroud gets that hot because it is made of plastic. How hot does a cars hood get in the middle of the summer? Tons of cars are wrapped and bare the elements year round.
I chose the vinyl because its what I'm wrapping the car with therefore will match perfectly. Painting may be difficult to match exactly since its metallic yet matte. Only time will tell how the outcome will be. I plan to put a battery charger on the car in the garage and turn the high beams on for a few mins, then check the temp on the shrouds. The rings are Luce Produkt Dual Orbs. Paint will be Rustoleum Satin Black and primer, both made for plastic. Also adding white led running lights in place of the amber running light. The lenses were rock chipped so I sanded them with 220 up to 2000. Will post some more pics up as I progress, but again Im slow due to working so much. |
Appreciate
0
|
01-18-2013, 05:21 PM | #12 |
Id rather be boating...
66
Rep 1,097
Posts |
Heres an updated pics of the shrouds fully wrapped. Should be making some progress this weekend. Will post new ones up as I progress.
Also, as it turns out finding paint to march this finish is difficult. I called a ton of body shops as well as automotive paint stores and they all seemed pessimistic about being able to match it. I suppose I'll be the test mouse on this! |
Appreciate
0
|
01-18-2013, 05:59 PM | #14 |
Id rather be boating...
66
Rep 1,097
Posts |
|
Appreciate
0
|
01-18-2013, 06:11 PM | #15 |
Id rather be boating...
66
Rep 1,097
Posts |
|
Appreciate
0
|
01-18-2013, 07:39 PM | #16 | |
Colonel
83
Rep 2,792
Posts |
Quote:
When I have wet sanded other lights, you can tell when you go through the coating because the when you spray them with water, the water beads differently on the coating than it does on the raw plastic. edit: I have 57K and mine are pretty beat up so I've been toying with refinishing the lenses and throwing in some AEs while I am at it.
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R |
|
Appreciate
0
|
01-19-2013, 07:42 PM | #17 |
Id rather be boating...
66
Rep 1,097
Posts |
Latest pic. The black was supposed to be satin, but looks pretty glossy. I'm trying to decide if I like it or if I want matte on it. The car will me matte, so maybe its a good contract!?!?
Anyway, heres how they look now. |
Appreciate
0
|
01-21-2013, 08:45 AM | #18 |
BimmerPost Supporting Vendor
307
Rep 13,093
Posts
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas
iTrader: (45)
Garage List 2013 Nissan GTR [0.00]
2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00] |
Looks good.
|
Appreciate
0
|
01-21-2013, 05:22 PM | #19 |
Important text here
24
Rep 130
Posts
Drives: 2013 M3 Conv
Join Date: Dec 2012
Location: Phoenix, AZ
|
Very cool project. Especially if you're a brave DIY'er!
__________________
2009 AM V8 Vantage Conv - Berwick Bronze, Quicksilver Exhaust 2013 M3 Conv - (RIP) thanks to uninsured a-hole 2004 Porsche 911 C4S Conv |
Appreciate
0
|
01-21-2013, 05:45 PM | #20 | |
Party at the Moontower
134
Rep 1,287
Posts |
Quote:
__________________
Eisenmann race | Test Pipes | BPM Stage 2 | Vorsteiner | Black lines | AA filter | iND cosmetics | KW Sleeve over | 20" BBS LM's | Macht Schnell Tow Strap | Euro modded front bumper | Revinora lip | iND mirror caps | BMW spoiler | BMW Steering wheel | iND Interior Pkg |You bet Jerez its black and i'll never go back! Instagram @NATIBEASTCAT
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|