|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
10-04-2011, 10:58 PM | #1 |
Lieutenant
27
Rep 444
Posts |
275/35 Pss.... Wtf
So i recently put on the pss on my two back tires and based on reviews and glowing comments about the tires, I thought it would be a no brainer because I usually go with ps2's. Right when i put the tires on it felt different, the grip in the back had gone down tremendously and driving fast doesn't feel comfortable anymore because it feels like they are gliding over the road not hugging them. Idk if there is something wrong with the tires or they really just act like this but I feel mislead if that is the case with all the amazing PSS comments..... End Rant.
|
10-05-2011, 01:12 AM | #4 |
Colonel
86
Rep 2,266
Posts |
Sorry if I was misinformed. My last 3 set of tires had the same effect(RE-11, Corsa Systems, and AD08), I thought it was the same with the PSS. Regardless, don't all tires require a small break-in period? I suppose my tires are a little bit different from the PSS, though.
__________________
Cheers
Ben |
Appreciate
0
|
10-05-2011, 01:28 AM | #5 |
Lieutenant Colonel
167
Rep 1,659
Posts |
I do know they need some sort of warm up period..... I had the same initial thought when I drove on them. During the summer I use Falken FK452s on the rear.... instant grip even with over 600bhp.
__________________
M3 E93 DCT, Space Grey,BC HB29 Forged Deep Concave Wheels, Ericsson Amuse F/R Bumper, Evolve Full Exhaust System, INTRAX Coilovers, STOPTECH BBK, Performance Steering Wheel,Custom Red/Black Leather Seats,///M3 ||Bimmerpost M3 Car Of The Month May - 2010SOLD
2010 R35 GTR |
Appreciate
0
|
10-05-2011, 07:25 AM | #6 |
Captain
15
Rep 751
Posts |
I’m no expert, but I assume all tires require the use of some type of release agent in the molding process, but maybe not. I recently bought a set of 275/35 PSS for my 18” wheels. As with most tires in my experience, the first few miles were not the best, in terms of grip. I’ve heard great variations in reported “break in” periods for tires. I expect, based on driving style, this period really does vary a lot. With performance tires, I usually drive pretty aggressively at first, realizing the tires are not going to be 100%, but wanting to get the process done. In that scenario, I usually find the tires reach their potential in a few days, not the weeks and hundreds of miles some report, but again, I’m sure it depends on the variables.
|
Appreciate
0
|
10-05-2011, 09:34 AM | #7 |
Lieutenant
27
Rep 444
Posts |
I have been driving pretty agressively for a little less then a week now about 50 miles per day with the commute and still no sign of more grip.... My biggest fear is having tires that will not grip on a car like the m3
|
Appreciate
0
|
10-05-2011, 09:58 AM | #9 |
Grown Azz Man
429
Rep 3,021
Posts |
I'll swap wheels with you and head to MSR......they'll have grip when I give 'em back.......you have my word on it Also, I've heard that driving slowly on gravel will help with the break in (I've never tried it so I can't confirm)................Phil
__________________
2016 GT4.....Sapphire Blue Metallic, Platinum stitch Leather/Alcantara interior, Carbon Fiber Trim, PCM w/Nav, Guards Red Belts, 2 Zone Climate, Sport Chrono, LWB, Smokers Pack, Big Gas Tank, Light Design Pack, Bi-Xenon w/PDL, Auto Dim Mirror, Clear Side Markers, GTS Clear Taillights
|
Appreciate
0
|
10-05-2011, 03:03 PM | #10 |
M3Post Supporting Vendor
87
Rep 964
Posts |
That's likely the problem right there. There is always a potential for weird/bad/unstable handling if you mix two different types. Michelin does not recommend mixing the PSS with any other tires, including the PS2.
Most people who have been getting them have been getting sets of four with excellent results.
__________________
_______________________________________________
I have accepted a new position at Tire Rack and am no longer in the sales department. gary@tirerack.com is available to assist with M3 questions. Last edited by ben@tirerack; 10-05-2011 at 03:35 PM.. Reason: Typo |
Appreciate
0
|
10-05-2011, 03:54 PM | #11 |
Second Lieutenant
14
Rep 263
Posts |
Go do a burnout. If the car is tail-happy with PSS in the rear (especially wider) and PS2 in the front, clearly PSS has less grip than the PS2, there is no way around that. So go wear them in and report back, because I may be getting PSS's in the rear very shortly and I'd like to know if this is a bad idea.
__________________
2011 E90 M3 ZP2 ZCV ZCW ZCP (for teh fastAr)
2005 LGT, AVO380 Turbo, a zillion other mods, ECU tuning by me. |
Appreciate
0
|
10-05-2011, 04:04 PM | #12 |
Lieutenant
27
Rep 444
Posts |
I have been driving hard and I can tell they arent as bad as the very beginning and hope they will get better because the difference is still minimal from when i first put them on.
|
Appreciate
0
|
10-05-2011, 04:24 PM | #13 |
Lieutenant
27
Rep 444
Posts |
Really do you think it just needs some hard driving? I have been giving it to it good prob for the last 300 miles and just a little change
|
Appreciate
0
|
10-05-2011, 04:30 PM | #14 |
Second Lieutenant
14
Rep 263
Posts |
How hard do you normally drive - how many miles did the PS2s last? Also check the tire pressure, may be overinflated.
__________________
2011 E90 M3 ZP2 ZCV ZCW ZCP (for teh fastAr)
2005 LGT, AVO380 Turbo, a zillion other mods, ECU tuning by me. |
Appreciate
0
|
10-05-2011, 04:34 PM | #15 |
Lieutenant
27
Rep 444
Posts |
I would say that generally when im on the highway id average around 80 with the occasional moments of 110... but generally im running the car pretty hard. I doubt it is tire pressure but I will take a look at it.
|
Appreciate
0
|
10-05-2011, 04:37 PM | #16 |
Second Lieutenant
14
Rep 263
Posts |
Driving in a straight line has the least amount of wear...
__________________
2011 E90 M3 ZP2 ZCV ZCW ZCP (for teh fastAr)
2005 LGT, AVO380 Turbo, a zillion other mods, ECU tuning by me. |
Appreciate
0
|
10-05-2011, 04:39 PM | #17 |
Lieutenant
27
Rep 444
Posts |
stock tires were the p zero's and they went out in 8k miles so that was kinda shocking. I do take corners and what not and any highway in houston is not straight, lots of corners.
|
Appreciate
0
|
10-05-2011, 05:47 PM | #20 |
Commander-In-Chief
2122
Rep 8,924
Posts
Drives: 2023 M2 Coupe, 2020 GLE 450
Join Date: Nov 2005
Location: Lake Oswego, OR
|
I'd go with Ben's theory. You need to change the fronts too. All reviews of the PSS I've seen have been glowing.
__________________
Greg Lake Oswego, Oregon, USA 2023 M2 Coupe - Brooklyn Grey/Cognac/CF, 6MT; 2020 MB GLE 450 |
Appreciate
0
|
10-09-2011, 09:34 AM | #21 |
Lieutenant
16
Rep 439
Posts |
Everone seems to like the PS2s...but next time try out the Bridgestone Potenza S-04 Pole Position tires. Great [period].
Here is what TireRack says about tire break-in: "Tires are comprised of many layers of rubber, steel and fabric. Due to these different components, your new tires require a break-in period to ensure that they deliver their normal ride quality and maximum performance. As tires are cured, a release lubricant is applied to prevent them from sticking in their mold. Some of the lubricant stays on the surface of your tires, reducing traction until it is worn away. Five hundred miles of easy acceleration, cornering and braking will allow the mold release lubricant to wear off, allowing the other tire components to begin working together. It is also important to note that your old tires probably had very little tread depth remaining when you felt it was time to replace them. As any autocrosser or racer who has tread rubber shaved off of his tires will tell you, low tread depth tires respond more quickly. Don't be surprised if your new tires are a little slower to respond (even if you use the exact same tire as before). Their new, full depth brings with it a little more tread squirm until they wear down." So...light em up and save yourself 500 miles of boring driving! Last edited by GOVCO; 10-09-2011 at 09:46 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|