|
|
04-02-2018, 07:07 PM | #4 |
Lieutenant
378
Rep 413
Posts |
Having spent a few years looking at cams for the S65 and S85, I've not seen anything specific to an FI setup. For that matter, I've had a hard time even buying cam blanks to have them custom ground. For the S85 TT build I'm working towards, I'm just using Schrick street cams. They offer higher lift, but the increased duration really isn't as necessary.
Finding a tuner willing to work with them and optimize exhaust cam strategy is challenging on the OEM DME as many, many iterations of reflash are needed to find what works. This is more of a concern with a turbo than SC though as you're not trying to preserve spool with the SC. |
Appreciate
0
|
04-02-2018, 07:24 PM | #5 | ||
Lieutenant
79
Rep 412
Posts |
Quote:
Quote:
About ECU the car has Syvecs ECU,and it's easy to tunning(I mean it's possible to do it). So Schrick has 2 option for S65 286 or 292. Wich one you would. Car engine Project Carroll Rods H JE Pistons 11:0 JE especial Pin's Struds Vortech V2-TI 18 lbs boost Radium Fuel sistem 10 AN Fuel Rail 5 Walbros 2200 CC fuel injector Progressive Nos Headers long tubes. And the main Fuel is METHANOL. And we are looking to break 900 WHP |
||
Appreciate
0
|
04-02-2018, 07:51 PM | #6 | |
Lieutenant
378
Rep 413
Posts |
Quote:
There is a 3rd set of Schrick cams that aren't talked about much, but made for solid lifters and removes the hydraulic lifters. If I were building the heads for a track focused motor, I would use stronger valves springs, dump the HVAs and go to solid cam followers, and look at bumping the revs up. I'm hoping to be able to use a larger intake valve on my project as well. |
|
Appreciate
0
|
04-02-2018, 07:54 PM | #7 | ||||
Lieutenant
79
Rep 412
Posts |
Quote:
Quote:
And off course Street application! And we looking Tu bump the revs up 9000 RPM (Gear Box Limitation) |
||||
Appreciate
0
|
04-03-2018, 01:46 AM | #8 |
Lieutenant Colonel
140
Rep 1,665
Posts |
If there was enough people interested in s65 we could split cost of the cams I know someone who would make them.... probably could get blanks made and you guys can do what you like
|
Appreciate
0
|
04-03-2018, 07:06 AM | #9 |
BimmerPost Supporting Vendor
3749
Rep 2,907
Posts
Drives: 2011 E93 M3
Join Date: Nov 2014
Location: DFW, Texas
|
I'd be interested in the custom cam grinder also. Right now all I have is a shop that welds the lobes on an OEM cam and regrinds them to spec.
|
Appreciate
0
|
04-03-2018, 07:12 AM | #10 | ||
Lieutenant
79
Rep 412
Posts |
Quote:
Quote:
You have my support! |
||
Appreciate
0
|
04-03-2018, 05:29 PM | #11 |
Lieutenant
258
Rep 564
Posts |
Out of curiosity, what is the benefit gained from the extra 500rpm? You don't think you can get to the 900whp without cams?
__________________
2009 E90 M3 DCT IB Slick Top | 2017 911 Carrera White 7MT Slick Top | 2003.5 E46 M3 CB SMG | 2005 Audi A4 USP Black 6MT |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|