|
|
01-30-2011, 10:23 AM | #1 |
Major
60
Rep 1,036
Posts |
Brembo BBK GT Installed + weight comparison
This setup is for sale now. Let me know if interested.
Installed these yesterday...Painted GTS orange by IND (Thanks again Nate). I was hoping for more weight savings, but they look good and work even better :0) Fronts: OEM Rotor: 21lbs Brembo Rotor (380mm) : 23lbs OEM Caliper: 13lbs Brembo Caliper: 11lbs Rears: OEM Rotor: 18lbs Brembo Rotor (355mm): 11lbs OEM Caliper: 9lbs Brembo Caliper: 12lbs Removed front and trimmed rear dust shields: 1lb Net weight savings from Brembo installation: 9lbs Last edited by ring007; 03-30-2011 at 01:11 PM.. |
01-30-2011, 01:15 PM | #5 |
Banned
60
Rep 638
Posts |
|
Appreciate
0
|
01-30-2011, 06:23 PM | #8 |
Lieutenant Colonel
30
Rep 1,789
Posts |
Nice color, but personally, I'd put a brembo logo on there. Otherwise it looks like you just painted the stock calipers, if that matters to you.
Oh for what it's worth, I remember seeing a comparison between the brembo GT vs PCCB (porsche ceramic) and the weight was quite similar. |
Appreciate
0
|
01-30-2011, 07:09 PM | #9 | |
Major
60
Rep 1,036
Posts |
Doesn't matter a bit to me. The mods I install on my car are for performance improvements only not to try impress someone who doesn't know the difference between painted oem calipers and a BBK (well OK all the carbon bits are solely for my own bling factor edification . I don't care what others think of my calipers when I'm flying by them on the track I purposely did not have the brembo logo installed on the calipers. I don't like it when manufacturers place their logo all over their products (unless they are paying me to advertise)
Quote:
|
|
Appreciate
0
|
01-31-2011, 07:54 AM | #12 |
Major
60
Rep 1,036
Posts |
|
Appreciate
0
|
02-03-2011, 04:04 PM | #16 |
Major
60
Rep 1,036
Posts |
Thanks Anup. Install was a breeze and it fits well. But my original lid doesn't come with a trunk lock like the '08 did I guess so I gotta figure out what I can do with the hole. I'll check with Nate to see if IND has a solution. The car is shipping to IND in March for a few "adjustments" in anticipation of the upcoming track season
|
Appreciate
0
|
02-12-2011, 03:18 AM | #18 |
Banned
60
Rep 638
Posts |
Just for ref, here are my UK front 380mm GT weights in Kg
Caliper with no brackets or pads Pair of pads bracket 380mm rotors Now the rear 380mm GT parts Calipers unloaded 380mm rotors Here is the old stock front parts for comparison Caliper with old pads fitted Last edited by alpina527; 02-12-2011 at 03:32 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|