|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
01-05-2013, 09:27 AM | #1 |
Enlisted Member
0
Rep 35
Posts |
Are these dyno results normal or low for my existing mods ?
Ok so I just left the dyno shop very disappointed 😢 I made 356whp !!! My mods are the follow .
1.rpi catless xpipe 2.ess tuning cable 3.ms intake I will soon be supercharging the car with ess also!! So my question is this a normal "whp" for my mods or am I lower than standard (I know no car is the same ) . |
01-05-2013, 12:20 PM | #3 |
Banned
39
Rep 1,590
Posts |
Your post is too generic. What kind of dyno was it? A mustang dyno will read low and that would sound about right. You can't just post your dyno is too low without any supporting info. I suggest you read up on the different kind of dynos and then evaluate your sessipn
|
Appreciate
0
|
01-05-2013, 12:59 PM | #4 |
Lieutenant Colonel
65
Rep 1,705
Posts |
delta's are all that really matter, so without a before, it's really not much help. As others have said, different dyno and different conditions make a big difference.
__________________
|
Appreciate
0
|
01-06-2013, 07:23 AM | #5 |
Lieutenant
22
Rep 469
Posts |
^^^ What they said and what kind of fuel are you running? Maybe some bad gas or spark plugs may need changed as well. It could be a combination of a few things to be honest.
Look on the bright side, it's more HP than you had to start with and you don't have to share your results with others. Enjoy the ride! |
Appreciate
0
|
01-06-2013, 07:44 AM | #6 | |
Enlisted Member
0
Rep 35
Posts |
Quote:
A dyno jet and 93oct,,, if been seeing people videos of people in the 390whp range with the same mods 😔 |
|
Appreciate
0
|
01-06-2013, 01:43 PM | #9 |
BimmerPost Supporting Vendor
8109
Rep 18,799
Posts
Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA
|
Best advise. Otherwise, it's a guessing game.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22 GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM |
Appreciate
0
|
01-06-2013, 02:51 PM | #10 |
Banned
33
Rep 220
Posts |
Not really a guessing game. As long as temps were not extreme and a few runs were done to get some kind of adaptation average happened 265 is really low for catless, intake/drop in and a tune on a dynojet with 93 octane.
I would ask you when did you have your plugs changed? I am guessing you are not hitting your timing targets which is the primary way a tune increases power. WIthout good plugs you will knock before ever hitting the targets |
Appreciate
0
|
01-07-2013, 07:04 PM | #11 |
Colonel
84
Rep 2,792
Posts |
How old are the plugs? How old is the software? Without determining why the car is "not running right", we can only assume that this particular dyno just reads a bit low.
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R |
Appreciate
0
|
01-07-2013, 11:25 PM | #13 | |
Enlisted Member
0
Rep 35
Posts |
Quote:
|
|
Appreciate
0
|
01-07-2013, 11:28 PM | #14 | |
Enlisted Member
0
Rep 35
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|