|
|
11-24-2013, 12:01 PM | #1 |
Brigadier General
311
Rep 3,675
Posts |
Fire Extinguisher...where Is Yours
ok did a search and from i found its been awhile and new mounts have been released so my question is what and where is yours mounted...was thinking of picking up the mount from vac.... but want to see what you guys are running...thank you in advance
__________________
|
11-24-2013, 12:04 PM | #2 |
Brigadier General
311
Rep 3,675
Posts |
__________________
|
Appreciate
0
|
11-24-2013, 01:16 PM | #3 |
Major
115
Rep 1,470
Posts |
The holes on the VAC unit did not match the bracket for the halon unit I got from Jegs. Be prepared to drill holes.
__________________
Stoptech 380mm/355mm | PFC08 / Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | MCS 2-way with 700/1000lb springs | Solid bushings and adjustable links | RD front swaybar | Apex EC-7 18x10 square 275/35-18 NT01 | Turner Race Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Alekshop Oil Cooler | Performance Steering Wheel | | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit Pro | Turner Steering Rack Stops | Vorshlag Camber Plates
|
Appreciate
0
|
11-24-2013, 01:39 PM | #4 |
Brigadier General
311
Rep 3,675
Posts |
ohhh ok maybe i wont use the one from vac....dont want to drill holes...what mount did you buy from jegs?
__________________
|
Appreciate
0
|
11-24-2013, 02:53 PM | #5 |
Automobilist
395
Rep 2,632
Posts |
I am using the VAC mount as well. Fitment was spot on with respect to the seat bolts but you will likely have to drill at least one hole for the extinguisher mount. The bracket for the extinguisher I bought from VAC didn't even match up. It took me literally 30 seconds to drill the hole so it's no big deal.
|
Appreciate
0
|
11-24-2013, 03:58 PM | #7 |
Major
115
Rep 1,470
Posts |
I still used the VAC. I just had to drill one hole. My bracket needed two holes, so I could get one to line up.
__________________
Stoptech 380mm/355mm | PFC08 / Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | MCS 2-way with 700/1000lb springs | Solid bushings and adjustable links | RD front swaybar | Apex EC-7 18x10 square 275/35-18 NT01 | Turner Race Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Alekshop Oil Cooler | Performance Steering Wheel | | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit Pro | Turner Steering Rack Stops | Vorshlag Camber Plates
|
Appreciate
0
|
11-24-2013, 04:23 PM | #8 |
Brigadier General
311
Rep 3,675
Posts |
was under the impression we couldnt get the euro mounts
__________________
|
Appreciate
0
|
11-24-2013, 07:37 PM | #9 |
Lieutenant Colonel
81
Rep 1,510
Posts |
Here you go: http://www.ecstuning.com/BMW-E82-135...3.0l/ES255516/
It's metal2metal and passes tech inspection with all major clubs. If you go down this route, the installation/drilling instructions and compatible extinguishers are posted either here or e90post. |
Appreciate
0
|
11-25-2013, 12:27 AM | #10 |
Second Lieutenant
42
Rep 266
Posts |
I also have the ECStuning mount and I like it. I took a little figuring how to mount it but when I did figure how it was no problem and mount and fit well. I used a standard fire extinguisher mount that came with a 2 1/2 lb Purple K extinguisher and had to file one hole a little to get things lined up. Because of the horizontal mounting, add a second strap to keep the extinguisher from drooping. Place I bought the extinguisher from gave me one, no charge. When all was mounted with the nozzle pointed down the handle just brushed my calf. So I cut off the part of the extinguisher mount that is used to hang it vertical, because it is mounted horizontal and not needed, then was able to turn the extinguisher slightly in the mount for more clearance. If you drill out the rivets that hold the straps in place the clips can be rotated further up and easier to get to.
And don't get a ABC extinguisher. Get a good BC or Purple K one, like the VAC one. If you ever have to use it ABC makes a mess, it just won't clean up and it is corrosive. |
Appreciate
0
|
11-25-2013, 07:18 AM | #11 | |
Lieutenant Colonel
776
Rep 1,718
Posts
Drives: 2011 M3 Jet Black:ZCP, ZCV, ZP
Join Date: May 2011
Location: Atlanta, Ga
|
Quote:
__________________
|
|
Appreciate
0
|
11-25-2013, 10:04 AM | #12 | |
Brigadier General
311
Rep 3,675
Posts |
Quote:
__________________
|
|
Appreciate
0
|
11-25-2013, 10:04 AM | #13 |
Brigadier General
311
Rep 3,675
Posts |
sounds like the way to go
__________________
|
Appreciate
0
|
11-25-2013, 12:20 PM | #14 |
Track? What Track? I was just riding along . . .
46
Rep 694
Posts |
Maybe you should think about getting a really big extinguisher:
http://www.m3post.com/forums/showthread.php?t=917662 |
Appreciate
0
|
11-25-2013, 12:35 PM | #15 | |
Brigadier General
311
Rep 3,675
Posts |
Quote:
__________________
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|