Tire Question

[Pat@sonictuning]

Maybe I'm a little slow on this one, but a customer was inquiring if he could run a 275/305 tire setup with a 19x10 width up front and 19x11 rear width wheel. I said this isn't possible without fender rolling? Am I missing something?

[LucWerkz]

I'm running 275/30R19 (19 x 10 et 25 square set up) up front on stock suspension, no issues.

[Blade929]

I'm lowered and running 295 PSS's with a 10.5 rear with an offset of et20 and it rubbed a lot. I had to raise the rear.

[Pat@sonictuning]

Originally Posted by Red_Baron

I'm running 275/30R19 (19 x 10 et 25 square set up) up front on stock suspension, no issues.

Thanks

Originally Posted by Blade929

I'm lowered and running 295 PSS's with a 10.5 rear with an offset of et20 and it rubbed a lot. I had to raise the rear.

Yes he wants to run a low offset on a custom wheel, but the only way I can see it fit is by running a super high offset on those widths which in turn will not be a direct bolt on once he tried to put the wheels on.