|
|
12-18-2012, 03:53 PM | #1 |
Colonel
274
Rep 2,664
Posts
Drives: Goggomobil
Join Date: Jul 2007
Location: Kangaroo land
|
Accessing Key setting in CIC
I have upgraded my CCC to CIC as you know. In CCC under the M Drive menu there were sub-menus MDrive and Key Settings. But since the retrofit of the CIC, I can't access the Key settings to change. Anyone got any idea how I can access the key settings via idrive or any other way to change my settings please. Since tuning the car thru Mike I no longer need the aggressive setup on start up. Currently, I am manually turning the settings off.
The only other option I have at the moment is putting back the CCC and changing the key settings. This is a headache given that I will have to re-pin the power connector to the display.
__________________
F86 X6///
|
12-18-2012, 03:59 PM | #2 |
Grown Azz Man
429
Rep 3,021
Posts |
Go to M Drive and slide the controller over to the right........Phil
__________________
2016 GT4.....Sapphire Blue Metallic, Platinum stitch Leather/Alcantara interior, Carbon Fiber Trim, PCM w/Nav, Guards Red Belts, 2 Zone Climate, Sport Chrono, LWB, Smokers Pack, Big Gas Tank, Light Design Pack, Bi-Xenon w/PDL, Auto Dim Mirror, Clear Side Markers, GTS Clear Taillights
|
Appreciate
0
|
12-18-2012, 04:02 PM | #3 |
Colonel
274
Rep 2,664
Posts
Drives: Goggomobil
Join Date: Jul 2007
Location: Kangaroo land
|
Thank you, I will try it when I am in the car this morning. Cheers
__________________
F86 X6///
|
Appreciate
0
|
12-18-2012, 04:12 PM | #4 |
Colonel
274
Rep 2,664
Posts
Drives: Goggomobil
Join Date: Jul 2007
Location: Kangaroo land
|
In fact after accessing the M Drive through the CIC you need to press the Options key. This will give a menu for M setting as well as M Key Settings. Then you change it. Switch off ignition, take the key out, and put it back in, and restart the car.
I after the nudge from M Ryder, I had to go and figure out myself. In fact thru the options, you can also reset the M setting. Greater options.
__________________
F86 X6///
|
Appreciate
0
|
12-22-2012, 05:38 PM | #5 |
Important text here
24
Rep 130
Posts
Drives: 2013 M3 Conv
Join Date: Dec 2012
Location: Phoenix, AZ
|
So what is the difference between the 'M' key and the 'M' settings in the previous menu?
|
Appreciate
0
|
12-22-2012, 09:09 PM | #6 |
Colonel
274
Rep 2,664
Posts
Drives: Goggomobil
Join Date: Jul 2007
Location: Kangaroo land
|
M setting is for the M button on the steering wheel. While you are driving and if you are in a playful mood you can make use of the settings by pressing the M button.
M Key setting is, when you start the car with a particular key, the setting store are your default settings. That way you don't need to change the settings every time you get in the car. These are only dynamic - suspension and chassis settings. Hope this is explained.
__________________
F86 X6///
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|