Front camber 2011 e92 ZCP M3

[tibra1]

2011 ZCP e92 M3 stock suspension w/EDC

I am looking to run different wheels and tires, and need to know what is the max camber you are able to get up front, stock.

I may need to dial-in close to -2.0 degree up front and want to know if I will be able to stock w/o camber plates

Any help or experiences are great appreciated.

[turugara]

I believe it's about 1.5 degree up front if you pull the pins. Don't quote me on that.

http://www.m3post.com/forums/showthr...=367003&page=2

[S65Tom]

I just had an alignment done on my 2011 ZCP sedan about a week ago. I had the tech at the dealership pull the pins and he ended up maxed on one side and some more room on the other at 1.5 degrees negative, hope that helps.
Thomas

[smmmurf]

my non zcp maxed at -1.6 L and -1.3 R maxed on both sides with pins out. it was -1.6L -1.1R and then I got in the driver's seat and it balanced out.

[tibra1]

Thx guys