Turner Motosport pulley

[tmntmn]

hey guys i just receive the Turner Motorsport pulley Model (PPK-S65-L) from a fellow member that was selling it. i have a 2009+ e92 m3 and i think i need the double side belt but when i got the package the pulley looks different from the pictures and can someone confirm that i have the right belt for it.

where are some pictures, and thanks in advance

pulley and side view




belt

[King Tut]

That looks just like my Evosport one. You reuse the OEM double sided belt and it doesn't underdrive the A/C and power steering on that side of the car. Then you use the shorter single sided belt on the other side with the alternator. That looks just like an Evosport pulley minus the logo.

[BMRLVR]

Hey Tan,

There were no instructions with the pulley when I recieved it so I called Turner and asked them why I didn't have two belts with the kit? They told me to reuse my double sided belt and replace the other belt with the one included in the kit. If you notice one section of the pulley is larger than the other...... the larger section is the same diameter as stock therefore utilizing the stock size belt. Give Turner a call if you want confirmation on this.

Jamie

[tmntmn]

Originally Posted by King Tut

That looks just like my Evosport one. You reuse the OEM double sided belt and it doesn't underdrive the A/C and power steering on that side of the car. Then you use the shorter single sided belt on the other side with the alternator. That looks just like an Evosport pulley minus the logo.

Thanks King Tut.

i check around the forum and everyone talks about the double side belt but never has any pictures or what so ever. the pully look funny because it didnt look like all the other ones that i seen on this forum.

Originally Posted by BMRLVR

Hey Tan,

There were no instructions with the pulley when I recieved it so I called Turner and asked them why I didn't have two belts with the kit? They told me to reuse my double sided belt and replace the other belt with the one included in the kit. If you notice one section of the pulley is larger than the other...... the larger section is the same diameter as stock therefore utilizing the stock size belt. Give Turner a call if you want confirmation on this.

Jamie

Hey Jamie,

thanks for the quick shipment of the pulley, i was just wondering why it didnt look like the other pulley so i wanted to make sure before i make an appointment to get it installed. but what u and king tut said sound right because the bigger side of the pulley hooks up to the double side belt and the smaller part uses the belt provided.

thanks again