|
|
08-26-2010, 06:53 PM | #1 |
Major
141
Rep 1,314
Posts |
RENN Spec | Challenge Aero Products
Hello m3post,
We had a chance to work with Challenge Engineering USA recently in becoming one of their West Coast Distributors. As a result, we work directly with Challenge and can give you real product support, real lead times, and faster service. BMW E92/E90 GT Carbon Fiber Race Trunk - All Coupes/Sedan Designed, engineered, and manufactured in the USA, our GT carbon sports trunk is the perfect addition to your 3 series BMW. Each trunk is constructed by hand from 100% carbon fiber materials inside and out. Additionally carbon Kevlar is added in key areas for strength and rigidity while maintaining maximum weight savings. From the factory, all 3 series models come with a heavy steel trunk. Mass amounts of weight savings from the rear most part of the car can be achieved by swapping to a lightweight version. Not only will you see a difference in handling, acceleration, and chassis response, but a stunning appearance as well. The intergraded spoiler on the trunks edge blends seamlessly with the factory body lines to create a true OEM look with perfect fitment. The trunks spoiler edge will offer additional aerodynamic down force to the rear of the car with minimal drag created. Coupe Trunk Weight: 29.5 lbs Challenge - GT Carbon Race Coupe Trunk: 8.8 lbs Sedan Trunk Weight: 38.5 lbs Challenge - GT Carbon Race Sedan Trunk: 9.9 lbs BMW E92/E90 GT Carbon Fiber/ Fiberglass Sports Trunk - All Coupes/Sedans Designed, engineered, and manufactured in the USA, our GT carbon sports trunk is the perfect addition to your 3 series BMW. Each trunk is constructed by hand from carbon fiber materials on the outside skin. Additional carbon fiber is added on the interior fiberglass structure in key areas for strength and rigidity, and finished with a black gel coat. From the factory, all 3 series models come with a heavy steel trunk. Mass amounts of weight savings from the rear most part of the car can be achieved by swapping to a lightweight version. Not only will you see a difference in handling, acceleration, and chassis response, but a stunning appearance as well. The intergraded spoiler on the trunks edge blends seamlessly with the factory body lines to create a true OEM look with perfect fitment. The trunks spoiler edge will offer additional aerodynamic down force to the rear of the car with minimal drag created. Coupe Trunk Weight: 29.5 lbs Challenge - GT Carbon Race Coupe Trunk: 11 lbs Sedan Trunk Weight: 38.5 lbs Challenge - GT Carbon Race Sedan Trunk: 16.5 lbs BMW E92/93 GT Carbon Rear Diffuser - Coupe / Convertible M3 Designed, engineered, and manufactured in the USA, the GT dry carbon rear diffuser is a stylish accent to the back of any M3 model 3 series! Each diffuser is constructed by hand from 100% carbon fiber and composite materials inside and out. Attention to detail is always our goal. This item is no different! Proper mounting and fitment was at the top of our list. Smooth mounting surfaces and reinforced bolt holes make sure your diffuser stays on, and looking good for years to come. The aggressive quad fin design exclusive to Challenge wraps your M3's tail pipes giving the rear a true race car look on the street or circuit. Made with the finest Dry Carbon materials available at our partner's Indy car and aerospace facility Specs: Dry carbon construction Flawless fitment Extremely light and rigid Dupont clear coated and buffed to a mirror finish BMW E90 GT Carbon Rear Diffuser - All Sedan M3 Designed, engineered, and manufactured in the USA, the GT dry carbon rear diffuser is a stylish accent to the back of any M3 model 3 series! Each diffuser is constructed by hand from 100% carbon fiber and composite materials inside and out. Attention to detail is always our goal. This item is no different! Proper mounting and fitment was at the top of our list. Smooth mounting surfaces and reinforced bolt holes make sure your diffuser stays on, and looking good for years to come. The aggressive quad fin design exclusive to Challenge wraps your M3's tail pipes giving the rear a true race car look on the street or circuit. Made with the finest Dry Carbon materials available at our partner's Indy car and aerospace facility Specs: Dry carbon construction Flawless fitment Extremely light and rigid Dupont clear coated and buffed to a mirror finish Pictures coming soon once the diffuser arrives! BMW E9X M3 GT Carbon Front Lip Spoiler Introducing the new GT Carbon Front Lip for the e9x M3. This lip utilizes the OEM front bumper curves for optimal increase in down force and ease of install by reusing the OEM holes. Please contact me for pricing! Best regards, Jason |
|
10-02-2010, 02:22 PM | #4 |
Brigadier General
376
Rep 4,089
Posts
Drives: 21 X6MC
Join Date: Jul 2008
Location: Seattle
|
|
Appreciate
0
|
10-03-2010, 03:34 AM | #5 |
Lieutenant
34
Rep 458
Posts
Drives: AW/FR '11 e92 M3 ZCP
Join Date: Nov 2007
Location: Socal
|
price picked up for front lip and rear diffuser for e90 please
thank you
__________________
[SIGPIC][/SIGPIC]
335i-SL55-M3!!!!!!!! |
Appreciate
0
|
10-10-2010, 01:13 PM | #6 |
Major
83
Rep 1,108
Posts |
Can you please PM me the price of a rear Challenger diffuser for an E90? Do you have any pics of how it mounts? I live in Northern CA. Is it just tape or does it use the existing bolts? How is the fitment? Thank you,
Chris |
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|