First sleeved S65 build

[BMRLVR]

Originally Posted by Soorena

No, just stroker and some other mods to extract the most NA power you can. It's built for hill-climbing.

The stock block is plenty strong even for boosted applications that are making up to 700 CHP. I find it a mystery why someone would want to go to this trouble and expense for an engine that is not even going to be forced inducted.

[Leonardo629]

Someone educate me pls

Pros and cons of a "sleeved engine"?

Better cooling?

[ACG]

I am actually in the process of doing a similar project on my M5 S85 motor. Boring out the engine to 5.4L or 5.6L and dropping compression from 12.1:1 to 10.1:1 and Darton sleeves to beef up the walls to withstand the extra boost I will be adding.

My car has the ESS VT2 kit at this time boosting 7psi, looking to move that up to 12psi.

Will be nice to see how this project does also.

[amirz1000]

Originally Posted by ACG

I am actually in the process of doing a similar project on my M5 S85 motor. Boring out the engine to 5.4L or 5.6L and dropping compression from 12.1:1 to 10.1:1 and Darton sleeves to beef up the walls to withstand the extra boost I will be adding.

My car has the ESS VT2 kit at this time boosting 7psi, looking to move that up to 12psi.

Will be nice to see how this project does also.

Oh nice. Keep us posted. Sounds like an awesome project. Is ess doing the work?

[IMG]

Originally Posted by ACG

I am actually in the process of doing a similar project on my M5 S85 motor. Boring out the engine to 5.4L or 5.6L and dropping compression from 12.1:1 to 10.1:1 and Darton sleeves to beef up the walls to withstand the extra boost I will be adding.

My car has the ESS VT2 kit at this time boosting 7psi, looking to move that up to 12psi.

Will be nice to see how this project does also.

Very nice,what pistons are you going with ?

[ACG]

Going with CP pistons and rods and I am working with RK Autowerks at this time. I do not post much on here but I am a member of the M5board.

[Soorena]

Originally Posted by BMRLVR

The stock block is plenty strong even for boosted applications that are making up to 700 CHP. I find it a mystery why someone would want to go to this trouble and expense for an engine that is not even going to be forced inducted.

The stress and pressure that hill climb engine should take is more than you guys think.

Best is asking Mike@VAC.

Originally Posted by ACG

Going with CP pistons and rods and I am working with RK Autowerks at this time. I do not post much on here but I am a member of the M5board.

So Raza does the hardware and Evolve does the software, right?

Very cool project

[ACG]

Originally Posted by Soorena

The stress and pressure that hill climb engine should take is more than you guys think.

Best is asking Mike@VAC.



So Raza does the hardware and Evolve does the software, right?

Very cool project

Yep Raza does all the grunt work and then prob have Rubin fly in or have his support and do the tune as I only trust him on making sure this runs right.

[Singletrack]

Originally Posted by ACG

Yep Raza does all the grunt work and then prob have Rubin fly in or have his support and do the tune as I only trust him on making sure this runs right.

Who is Rubin if I may ask?

[Soorena]

Originally Posted by Singletrack

Who is Rubin if I may ask?

Rubin K, the Danish tuner.

[Singletrack]

Originally Posted by Soorena

Rubin K, the Danish tuner.

Ah. Don't know him; will do a search. Thanks.

[BPMSport]

Originally Posted by Singletrack

Ah. Don't know him; will do a search. Thanks.

Rubin is the guy that really knows what's going on with these ECU's.

[02LSBvert]

Just a little background..
The motor was hydro-locked and instead of buying a used motor, he decided to rebuild his motor for a little extra.


forged pistons with teflon coating and carrillo rods


balanced crankshaft

[02LSBvert]

2 S65s:

Quick build pics, i didnt want to load all of them (over 100pics)






If you want to see more pics: www.facebook.com/MNCPerformance
Instagram: MNCPerformance

[Singletrack]

Originally Posted by Mike Benvo

Rubin is the guy that really knows what's going on with these ECU's.

Ah, the mystery man. ; )

[Singletrack]

Originally Posted by ACG

I am actually in the process of doing a similar project on my M5 S85 motor. Boring out the engine to 5.4L or 5.6L and dropping compression from 12.1:1 to 10.1:1 and Darton sleeves to beef up the walls to withstand the extra boost I will be adding.

My car has the ESS VT2 kit at this time boosting 7psi, looking to move that up to 12psi.

Will be nice to see how this project does also.

Very cool project. Good luck!

[Soorena]

Originally Posted by Singletrack

Ah, the mystery man. ; )

Yup, Mr.X

[flipm3]

Originally Posted by Soorena

Rubin K, the Danish tuner.

Originally Posted by Mike Benvo

Rubin is the guy that really knows what's going on with these ECU's.

Is there anywhere online where I can read more about this tuning master?

I am always interested in reading what goes down in the tuning industry

[Soorena]

Originally Posted by flipm3

Is there anywhere online where I can read more about this tuning master?

I am always interested in reading what goes down in the tuning industry

There are not much about him on interwebz other than one of his recent projects that had to face some major problems. Google "BavSol Mr.X"

[flipm3]

Originally Posted by Soorena

There are not much about him on interwebz other than one of his recent projects that had to face some major problems. Google "BavSol Mr.X"

Ahhhh....now I recall this tuner

Thanks!

[mcoupebobby]

this looks like a fun build

[VCP]

What hydro locked the motor