|
|
06-10-2014, 02:45 PM | #1 |
Captain
214
Rep 692
Posts |
Removing Center Vents
This question is buried in another thread, so I figured I'd pull it to get a faster response. I have the center trim piece off for CF wrapping but can't figure out how to get the center vents out. I took off the two nuts, but it looks like it is clipped along the entire edge top and bottom. Not sure how to get the length of the clip lifted w/o breaking it. Since I know others have done this, I'm wondering how you removed them...
__________________
Thanks,
Dave [SIGPIC][/SIGPIC] |
06-10-2014, 02:58 PM | #2 |
First Lieutenant
41
Rep 318
Posts |
Removing the vents from the trim? Use a flat head and start at once side, Twist the head of the screw driver once inserted into the clip and pull upwards on the vent housing so it doesn't lock back into place. Do this until you get all of them and it should pop right off. It can be frustrating the first time.
__________________
Current: 2009 Space Gray e92 M3 - Mod list too long to list Gone: 2004 Jet Black/Black SMG M3 |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|