TE37SL Centre Cap Idea - Page 4

VOM3 · 10-04-2012, 04:14 AM

Are these still available? Keen to get a set for my SLs...

4sevens.com · 10-04-2012, 04:29 AM

+1

sawzall · 10-04-2012, 10:51 AM

Quote:

Originally Posted by VOM3

Are these still available? Keen to get a set for my SLs...

They are still available. If you look in the Wheels and Tire section, you'll find a thread from Victory Road with the information.

isugoo · 10-04-2012, 11:15 AM

Quote:

Originally Posted by shizzle

They are still available. If you look in the Wheels and Tire section, you'll find a thread from Victory Road with the information.

link please?

sawzall · 10-04-2012, 11:40 AM

Quote:

Originally Posted by isugoo

link please?

http://www.m3post.com/forums/showthr...s+victory+road

VOM3 · 10-04-2012, 01:12 PM

I have the new SL offset...

Rear - 19x10.5+22
Front - 19x9.5 +21

Apparently the depth of the hub bore is too shallow, would you guys be able to make one that would?

Endless619 · 10-04-2012, 06:29 PM

You do know there are center cap adapter allowing for original TE37 centercaps to mate with SLs? They have been available for 6 months already. Old news.

sawzall · 10-04-2012, 06:48 PM

Quote:

Originally Posted by VOM3

I have the new SL offset...

Rear - 19x10.5+22
Front - 19x9.5 +21

Apparently the depth of the hub bore is too shallow, would you guys be able to make one that would?

We've tried to make a shallower fitment, but in testing we've found that the adapter can become unseated after several heat cycles. We're still working on the problem and will let you know if/when we're able to solve the problem.

Moxie · 10-05-2012, 02:35 PM

Quote:

Originally Posted by Endless619

You do know there are center cap adapter allowing for original TE37 centercaps to mate with SLs? They have been available for 6 months already. Old news.

Link?

VOM3 · 10-08-2012, 11:46 AM

Quote:

Originally Posted by shizzle

We've tried to make a shallower fitment, but in testing we've found that the adapter can become unseated after several heat cycles. We're still working on the problem and will let you know if/when we're able to solve the problem.

Thank you, I hope you guys find a solution. My m3 needs it! the rust in the center looks crap. Eager to hear from you

Kasé Zomé · 10-08-2012, 12:58 PM

^ +1. I have the 21 offset front too. Thanks shizzle!!

10-04-2012, 06:29 PM	#73
Endless619 DHS Drives: bmw x5, m3, Acura TL Join Date: Oct 2010 Location: California/Maine/Oregon Posts: 2,592 iTrader: (11)	You do know there are center cap adapter allowing for original TE37 centercaps to mate with SLs? They have been available for 6 months already. Old news. Last edited by Endless619; 10-04-2012 at 06:57 PM.

10-08-2012, 12:58 PM	#77
Kasé Zomé Captain Drives: faster than my demons can fly Join Date: May 2011 Location: SoCal Posts: 735 iTrader: (1) Garage List 2011 E90 M3 [4.93]	^ +1. I have the 21 offset front too. Thanks shizzle!! __________________ 2011 M3/4/6 ZCP Slick Top / Euro MDM / OEM v1 Exhaust Mod / AA Green Filter / Red Volk TE37 SL 18x10.5 et20 square / Dunlop Direzza II 275/35 / OEM Carbon Splitters / F10 M5 Shift Knob

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-04-2012, 04:14 AM	#67
VOM3 New Member Drives: E92 M3 Join Date: Aug 2011 Location: Australia Posts: 13 iTrader: (0)	Are these still available? Keen to get a set for my SLs...

10-04-2012, 04:29 AM	#68
4sevens.com Major Drives: '11 LMB e90 M3; '99 LS6 Miata Join Date: Apr 2010 Location: Atlanta, GA Posts: 1,476 iTrader: (3)	+1

10-04-2012, 01:12 PM	#72
VOM3 New Member Drives: E92 M3 Join Date: Aug 2011 Location: Australia Posts: 13 iTrader: (0)	I have the new SL offset... Rear - 19x10.5+22 Front - 19x9.5 +21 Apparently the depth of the hub bore is too shallow, would you guys be able to make one that would?