|
|
03-29-2013, 05:11 PM | #1 |
Major
115
Rep 1,470
Posts |
Power Steering Cooler Removal
I am trying to get this GT4 unit in, but I cannot figure out how to get the OEM one out. I have it torn down pretty far. bumper off, fan out, radiator loosened, air box out, etc. Still cannot find the magic solution to replace this piece. Anybody have any tips or access to the online manual to send me the directions? I am getting close, but not close enough.
Thanks
__________________
Stoptech 380mm/355mm | PFC08 / Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | MCS 2-way with 700/1000lb springs | Solid bushings and adjustable links | RD front swaybar | Apex EC-7 18x10 square 275/35-18 NT01 | Turner Race Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Alekshop Oil Cooler | Performance Steering Wheel | | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit Pro | Turner Steering Rack Stops | Vorshlag Camber Plates
|
03-29-2013, 06:27 PM | #2 |
Major
115
Rep 1,470
Posts |
Looks like radiator needs to come out and then condenser can be pushed toward engine to get access. Thoughts?
__________________
Stoptech 380mm/355mm | PFC08 / Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | MCS 2-way with 700/1000lb springs | Solid bushings and adjustable links | RD front swaybar | Apex EC-7 18x10 square 275/35-18 NT01 | Turner Race Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Alekshop Oil Cooler | Performance Steering Wheel | | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit Pro | Turner Steering Rack Stops | Vorshlag Camber Plates
|
Appreciate
0
|
03-30-2013, 11:24 AM | #3 |
Major
115
Rep 1,470
Posts |
What mad skillz I have. She is in. Radiator must come out. push condenser back on driver's side to remove bracket that holds two pass unit. install 4 pass unit and then the plastic bracket for it. clip in power steering hoses. then push condenser back and drop radiator back in. the rest is straightforward stuff to do a UDP kit, the bumper and the undertrays.
__________________
Stoptech 380mm/355mm | PFC08 / Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | MCS 2-way with 700/1000lb springs | Solid bushings and adjustable links | RD front swaybar | Apex EC-7 18x10 square 275/35-18 NT01 | Turner Race Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Alekshop Oil Cooler | Performance Steering Wheel | | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit Pro | Turner Steering Rack Stops | Vorshlag Camber Plates
|
Appreciate
4
|
Post Reply |
Bookmarks |
|
|