|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
04-18-2016, 09:07 AM | #1 |
First Lieutenant
57
Rep 383
Posts |
Acura TL bore to Bmw
Got a question for you guys. I am interested in a set of aftermarket wheels that were originally made for an acura TL 5x120 64.1mm center bore. I know bmw has a 72.5mm Bore. Would i just need a set of hubcentric rings to match the vehicle bore or would i need the rings to match the wheel bore as well.
|
04-18-2016, 06:14 PM | #2 |
Private
6
Rep 65
Posts |
You will need to have the center bore increased from 64.1 to 72.6 and I believe you will need to increase the lug area from 12mm to 14mm. Acura wheel studs are 12 mm and BMW lug nuts are 14mm.
|
Appreciate
0
|
04-18-2016, 11:58 PM | #3 |
Major
501
Rep 1,236
Posts |
|
Appreciate
0
|
04-19-2016, 12:33 AM | #4 |
Lieutenant General
11586
Rep 12,726
Posts |
i doubt they are anywhere close to the right offset and width... if you happen to find an adapter they are likely going to look weird.
__________________
Instagram; @roastbeefmike
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|