After a year of waiting, I finally get my Revinora Race [vid]

3XTR3M3 · 03-01-2011, 05:05 PM

First off, let me start with saying I was one of the first in line for this exhaust since I got wind of it. So I made a deposit on it a whiiiiile ago in hopes of getting it installed in a month or so. Theres even some really old posts where I put my foot in the my mouth saying "I'm getting the Revinora Exhaust in a week!"

Well, they kept pushing the date back on the exhaust as they were not happy with the gains / sound. I did get antsy but I really liked the direction they were heading with it and did not ask for my deposit back.

In the meantime, I didn't want to stay stock so I bought tightie's Remus set-up. It was a nice exhaust and I enjoyed it greatly.

Long story short, I finally got the Revinora (race version) on the car and I'm glad I waited. Well, I didnt really wait as I had the Remus lol. But it sounds really, really, good. I was impressed with the sound right of the bat and couldn't wait to throw the car on a dyno.

Enter GMG Racing. A friend of mine and I took the car to GMG Racing (insane shop, crew, and cars) and did some pulls on their dyno. The dyno room was a completely separate and air tight room. I had never seen a dyno set-up like this. There were no giant fans in front of the car. Instead, there was two gigantic openings built right into the wall in front of the car. The two openings were ducts blowing air from a unit on the roof. Pretty crazy.

After we put on a stock exhaust and did some pulls, we put on the Revinora right after and did about 6 pulls as far as I remember. The gains were good. It showed 13-15/16rwhp pretty consistently.

The Exhaust is actually a lot lighter than stock as well but I don't know the exact weight off the top of my head. Its not titanium so its not silly light but it is noticeably lighter.

The weld job is exceptional. Very VERY clean welds. Ill try to find a few pics from my phone.

So heres the video my friend and I shot a week ago. He cut the video pretty well and made it all movie trailer style/dramatic lol. He landed a gig cutting amateur porn a few months ago so... this is the best we get

Before anyone asks, I'm debating how to paint the trunk so its raw CF for now.

Enjoy

esquire · 03-01-2011, 05:13 PM

Looks like there's a problem with the video. if you're embedding a youtube video make sure to only put the numbers and letters following the v= into your CODE.

kitw · 03-01-2011, 05:15 PM

Fixed for you

ES_TRADER · 03-01-2011, 05:15 PM

can u post pics too

3XTR3M3 · 03-01-2011, 05:16 PM

Quote:

Originally Posted by esquire

Looks like there's a problem with the video. if you're embedding a youtube video make sure to only put the numbers and letters following the v= into your CODE.

Quote:

Originally Posted by kitw

Fixed for you

Thanks guys

esquire · 03-01-2011, 05:18 PM

pretty dramatic. nicely done though.

Sean@PYSpeed.com · 03-01-2011, 05:35 PM

nice video!

Daft · 03-01-2011, 06:23 PM

Is that actual rubber bits I see combusting at 0:29?!

dimabimmer · 03-01-2011, 07:43 PM

hahaha! nice video!

MMMorish · 03-01-2011, 07:50 PM

traouik · 03-01-2011, 10:19 PM

umm....im gonna need some new pants...

Krozi · 03-01-2011, 10:27 PM

Pretty good gains for just an axleback!

white9duece · 03-02-2011, 12:28 PM

Yours sounds better than mine -_-

Cal@Sonic MS · 03-02-2011, 12:41 PM

Sounds great. Awesome vid

Ferre86 · 03-02-2011, 12:43 PM

well done!

GreasyGinzo · 03-02-2011, 01:36 PM

LMAO why the fuck was he banging gears on the dyno?

johnnybm3 · 03-02-2011, 01:54 PM

Quote:

Originally Posted by GreasyGinzo

LMAO why the fuck was he banging gears on the dyno?

Different type of pull.
On the Mustang you can do 1/4 mile type loads. delta speed xx-xx

M&AGuy · 03-02-2011, 02:48 PM

Quote:

Originally Posted by 3XTR3M3

He landed a gig cutting amateur porn a few months ago so... this is the best we get

tightie · 03-02-2011, 03:44 PM

i miss the remus set up

eisenb11 · 03-02-2011, 05:11 PM

Quote:

Originally Posted by 3XTR3M3

So heres the video my friend and I shot a week ago. He cut the video pretty well and made it all movie trailer style/dramatic lol. He landed a gig cutting amateur porn a few months ago so... this is the best we get

dlbrooks18 · 03-02-2011, 05:14 PM

Fantastic video! Car is a beast!

Locksmythe · 03-02-2011, 06:00 PM

Quote:

Originally Posted by Daft

Is that actual rubber bits I see combusting at 0:29?!

I had to watch it a couple times. Interesting. Byebye tires.

03-01-2011, 05:05 PM	#1
3XTR3M3 Lieutenant Colonel 99 Rep 1,575 Posts Drives: E92 AW M3 6MT Join Date: Aug 2006 Location: LA iTrader: (1)	After a year of waiting, I finally get my Revinora Race [vid] First off, let me start with saying I was one of the first in line for this exhaust since I got wind of it. So I made a deposit on it a whiiiiile ago in hopes of getting it installed in a month or so. Theres even some really old posts where I put my foot in the my mouth saying "I'm getting the Revinora Exhaust in a week!" Well, they kept pushing the date back on the exhaust as they were not happy with the gains / sound. I did get antsy but I really liked the direction they were heading with it and did not ask for my deposit back. In the meantime, I didn't want to stay stock so I bought tightie's Remus set-up. It was a nice exhaust and I enjoyed it greatly. Long story short, I finally got the Revinora (race version) on the car and I'm glad I waited. Well, I didnt really wait as I had the Remus lol. But it sounds really, really, good. I was impressed with the sound right of the bat and couldn't wait to throw the car on a dyno. Enter GMG Racing. A friend of mine and I took the car to GMG Racing (insane shop, crew, and cars) and did some pulls on their dyno. The dyno room was a completely separate and air tight room. I had never seen a dyno set-up like this. There were no giant fans in front of the car. Instead, there was two gigantic openings built right into the wall in front of the car. The two openings were ducts blowing air from a unit on the roof. Pretty crazy. After we put on a stock exhaust and did some pulls, we put on the Revinora right after and did about 6 pulls as far as I remember. The gains were good. It showed 13-15/16rwhp pretty consistently. The Exhaust is actually a lot lighter than stock as well but I don't know the exact weight off the top of my head. Its not titanium so its not silly light but it is noticeably lighter. The weld job is exceptional. Very VERY clean welds. Ill try to find a few pics from my phone. So heres the video my friend and I shot a week ago. He cut the video pretty well and made it all movie trailer style/dramatic lol. He landed a gig cutting amateur porn a few months ago so... this is the best we get Before anyone asks, I'm debating how to paint the trunk so its raw CF for now. Enjoy __________________ Last edited by 3XTR3M3; 03-01-2011 at 05:21 PM..
	Appreciate 0 Tweet Quote

03-01-2011, 05:13 PM	#2
esquire Brigadier General 478 Rep 3,044 Posts Drives: 2011 Dakar Yellow M3, 2018 M5 Join Date: Feb 2007 Location: Orange County, California iTrader: (0)	Looks like there's a problem with the video. if you're embedding a youtube video make sure to only put the numbers and letters following the v= into your CODE. __________________ [ESS VT2-625] [Akrapovic Evolution Exhaust] [KW Clubsports] [OSS Angel Eyes] [Revinora r-CRT Lip] [Vorsteiner Boot] [Challenge Race Diffuser] [See the Build Thread HERE]
	Appreciate 0 Quote

03-01-2011, 05:15 PM	#3
kitw Colonel 471 Rep 2,991 Posts Drives: F91 M8, 991.2 GT3 Join Date: Jun 2007 Location: Bay Area, CA iTrader: (20)	Fixed for you
	Appreciate 0 Quote

03-01-2011, 05:15 PM	#4
ES_TRADER Colonel 344 Rep 2,928 Posts Drives: 328i, 335i, M3, 535i, X5, 36M Join Date: Oct 2010 Location: OC iTrader: (3) Garage List 2014 Ford Raptor [0.00] 2012 328i E92 [10.00] 2013 X5 [0.00] 2013 335i F30 [8.00] 1990 Toyota Previa [0.00] 1997 E36 M3 [10.00] 2011 E92 M3 [0.00] 2011 535i [0.00]	can u post pics too
	Appreciate 0 Quote

03-01-2011, 05:18 PM	#6
esquire Brigadier General 478 Rep 3,044 Posts Drives: 2011 Dakar Yellow M3, 2018 M5 Join Date: Feb 2007 Location: Orange County, California iTrader: (0)	pretty dramatic. nicely done though. __________________ [ESS VT2-625] [Akrapovic Evolution Exhaust] [KW Clubsports] [OSS Angel Eyes] [Revinora r-CRT Lip] [Vorsteiner Boot] [Challenge Race Diffuser] [See the Build Thread HERE]
	Appreciate 0 Quote

03-01-2011, 05:35 PM	#7
Sean@PYSpeed.com Major General 306 Rep 8,952 Posts Drives: 2009 AW E92 M3 Join Date: Nov 2009 Location: Bay Area iTrader: (22)	nice video!
	Appreciate 0 Quote

03-01-2011, 06:23 PM	#8
Daft Major 384 Rep 1,202 Posts Drives: 2021 M2C Join Date: Jan 2009 Location: Ontario, Canada iTrader: (2) Garage List 2003 BMW M3 [10.00] 2011 BMW M3 [9.71]	Is that actual rubber bits I see combusting at 0:29?!
	Appreciate 0 Quote

03-01-2011, 07:43 PM	#9
dimabimmer Lieutenant Colonel 148 Rep 1,885 Posts Drives: '11 E92 M3 ZCP 6MT Join Date: Apr 2009 Location: Brooklyn to SoHo NYC iTrader: (0)	hahaha! nice video! __________________ '11 E92 M3 ZCP SG 6MT Tech Sound USB Heat Cloth Aluminium Sunshade http://www.m3post.com/forums/showthread.php?t=422151
	Appreciate 0 Quote

03-01-2011, 07:50 PM	#10
MMMorish Just call me J.J. McClure 156 Rep 2,834 Posts Drives: E92 M3 & C4 Corvette Join Date: Sep 2008 Location: Toronto iTrader: (5)	__________________ MODS: Meisterschaft GT Racing Exhaust / BMC Air Filter / UUC SSK & DSSR (Modded)/ RPI Scoops / Passport SRX Hardwired / Custom Wrap 3M Clearbra / 20% Tint / 50% Windshield Tint / Key Hole Delete / Matted Out Accessories / VRS Type II Diffuser / Smoked Reflectors / Euphoria 6K LED Interior Lights / Rear Fog Light Mod / 6000K HID's / 6500K LUX H8 Angel Eyes / RDash License Plate LED Kit / LED Xenon Reverse Lights "M3 drivers have no friends"
	Appreciate 0 Quote

03-01-2011, 10:19 PM	#11
traouik Enlisted Member 2 Rep 44 Posts Drives: e30,e32,e36,e38,e39,e46 Join Date: Oct 2010 Location: New England iTrader: (0)	umm....im gonna need some new pants...
	Appreciate 0 Quote

03-01-2011, 10:27 PM	#12
Krozi Colonel 167 Rep 2,736 Posts Drives: 2008 E92 ///M3 Alpine White Join Date: Oct 2009 Location: SoFla - Bonita Springs iTrader: (24)	Pretty good gains for just an axleback! __________________ 2008 E92 ///M3 Alpine White//Fox Red//6MT// Florida Bimmer - Join us on FaceBook!
	Appreciate 0 Quote

03-02-2011, 12:28 PM	#13
white9duece Private 3 Rep 82 Posts Drives: E92 M3 Join Date: Oct 2010 Location: City of Angle's iTrader: (0)	Yours sounds better than mine -_-
	Appreciate 0 Quote

03-02-2011, 12:41 PM	#14
Cal@Sonic MS 430 Rep 4,650 Posts Drives: bmw Join Date: Jan 2011 Location: earth iTrader: (2)	Sounds great. Awesome vid
	Appreciate 0 Quote

03-02-2011, 12:43 PM	#15
Ferre86 Captain 38 Rep 944 Posts Drives: E93 M3/H2/SL350/Panamera 4/ Join Date: Mar 2009 Location: Turkey iTrader: (0)	well done! __________________ http://www.youtube.com/user/Ferre86 \| e93 M-DCT ESS VT2-625 \| Akra Slip-on \| Challenge Race Catless x-pipe \| Challenge front lip \| Challenge Diffuser \| Carbon front grilles \| defi gauges control unit \| Macht Schnell gauge panel \| E93 M3 trunk Spoiler \| IND Carbon Fiber Side Markers \|
	Appreciate 0 Quote

03-02-2011, 01:36 PM	#16
GreasyGinzo Captain 41 Rep 635 Posts Drives: '08 E92 AW 6MT M3(Totaled) Join Date: Dec 2010 Location: North Jersey iTrader: (1)	LMAO why the fuck was he banging gears on the dyno? __________________
	Appreciate 0 Quote

03-02-2011, 03:44 PM	#19
tightie JOSH SHOKRI. 524 Rep 5,881 Posts Drives: 991 GT3RS, 964, Raptor Join Date: Aug 2005 Location: los angeles, california. iTrader: (7) Garage List 2008 BMW M3 [7.90]	i miss the remus set up __________________ Current: 16 991 GT3RS , 91 964 C2, 17 Raptor \| Past: 2015 991 GT3, 2015 i3,15 YMB F80 M3, 13 E92 M3 DCT, 08 E92 M3 6MT, 07 E60 M5, 02 E46 M3 Instagram: @josh_speeddistrict #SpeedDistrict @SpeedDistrict
	Appreciate 0 Quote

03-02-2011, 05:14 PM	#21
dlbrooks18 Brigadier General 161 Rep 3,736 Posts Drives: e90 335i Join Date: Nov 2008 Location: Los Angeles iTrader: (2)	Fantastic video! Car is a beast! __________________ 2008 E90 335
	Appreciate 0 Quote