Advan Wheels - Complete Selection RS/RS-D/RZ-DF

[Ryan@IND]

Advan by Yokohama Wheel Orginal Design
- WheelSTO is an authorized dealer of Yokohama Wheel Original Design -

Many are familiar with the high quality wheels by Yokohama Wheels Original Design, such as the Advan RS. The Yokohama Wheel Original Design is a subsidiary of the Yokohama Rubber Co. With deep roots in Motorsport, they have designed and produced the Advan Racing line of wheels. The Advan Racing have proven themselves over and over again on the ruthless circuits of WTCC (BMW 320si) and PWRC (Lancer EVO X). It is Yokohama Wheel's policy and goal to make the same high quality performance wheels that goes on these race cars as they do for the street cars.

Advan RS
The Advan RS has been the wheel of choice for the Scuderia Pro-Tem in Italy since 2007. The 17 - 9.0J wheel that meets stringent FIA regulations are in essence the same wheels that are sold as street wheels. They are manufactured and even finished the same way to the last detail.





Sizing:
- 17" / 18" / 19"

specifications:
- Flow Form Cast with special heat treatment
- Dark Gun Metal: Special 3 coat + 3 bake process
- Racing Hyper Silver: Special 4 coat + 4 bake process
- Center cap Optional (sold separately)
- 19 - 9.0 weighs ~20lbs

Colors:
- Dark Gun Metal
- Racing Hyper Silver




Advan RS-D
The Advan RS-D is a slight deviation from the traditional full face wheels by Advan Racing. However, the essence remains the same. Same high quality flow form casting with 3D processing for the engraved letters. Curving spokes ensure that there is ample brake clearance and creates a very dynamic look.





Sizing:
- 18" / 19" / 20"

specifications:
- Flow Form Cast with special heat treatment
- Dark Gun Metal: Special 3 coat + 3 bake process
- Racing Hyper Silver: Special 4 coat + 4 bake process
- Matte Black: Special 3 coat + 3 bake process
- Center cap Optional (sold separately)

Colors:
- Machining Silver
- Machining Black
- Matte Black
- Bright Chrome










Advan RZ-DF
The Advan RZ-DF is a new release for 2010. It made its first appearance at the 2010 Tokyo Auto Salon. The first production batch just made its way stateside and it has been drawing full attention ever since. the split V spokes with the deep face (lip) design isn't the only distinguishing factor on these wheels. This is the first of its kind. The first Forged set of wheel from the Advan Racing wheel line. With 8000ton Mold form forging technology combine with the spin forging technology, this is one of the highest strength of weight ratio wheels on the market.





Sizing:
- 18" / 19"

specifications:
- Mold Form Forged (8000ton)
- comes in standard deep / medium deep / extra deep lips depending on width.
- all rims are diamond cut except for the Matte Black finish
- Center cap optional (sold separately)

Colors:
- Platinum Silver + Machining
- Platinum Black + Machining
- Matte Black





Center Cap Options



Adpater Ring for BMW Center Cap



Check out more Yokohama Advan Racing Wheels HERE

How to Order or Get More Information:
Call: 312.880.7767
Email: info@wheelsto.com
PM the WheelSTO Crew:
Julius ● Julius@WSTO
Dave ● Dave@WSTO
Support ● WheelSTO

WheelSTO Wheel & Tire Package Program
WSTO also offers wheel and tire packages. Please Let us know what your favorite tire is, when asking for price quotes . If you are not sure, just let us know and we can make some suggestions for your intended use! WheelSTO uses a Hunter Road Force balancer to ensure your setup is perfectly balanced. Each order includes a printout showing the accuracy. Ask Your WheelSTO Rep about our FREE Mount and Balance Program Today!

[Johan@WSTO]

19" Yokohama Advan RZ-DF in Platinum Black


19x10 +22


19x9 +22

[Martin_D]

Any idea if the RZ-DF in those sizes clear Brembo 380mm F/R?

[STALKER]

Do you guys have the Adpater Ring for BMW Center Cap in stock?

[WheelSTO]

Originally Posted by Martin_D

Any idea if the RZ-DF in those sizes clear Brembo 380mm F/R?

We have been told that the RZ-DF will clear 380mm Brembo BBK, but we are in the process of making sure that they do. As the last time we were told that the RS-D fits, a bolt had to be grinded down so that it did not make contact with the barrel.

will keep everyone updated....

Originally Posted by STALKER

Do you guys have the Adpater Ring for BMW Center Cap in stock?

We are all sold out at the moment, and Yokohama/ADVAN does not have any in stock as well. ETA is around 6-9 weeks.

[Ryan@IND]

the last set of matte Black RZ-DF that was in stock is now sold out! Thanks for the order and can't wait to see some pics.... BC Thanks for the support~!

[Johan@WSTO]

Advan RS in gun metal finish on a E92 335i

[Johan@WSTO]

19 inch RZ-DF in matte black finish!

[Johan@WSTO]

19" Advan RZ-DF in Matte Black



19X9 +22


19x10 +22

[Ryan@IND]

Stock update:

RS-D
19 - 9.0 et22
19 - 10.0 et20
Machining Black and Matte Black in stock

RS-D
20 - 9.0 et17
20 - 10.5 et25
Machining Black and Matte Black in stock

RZ-DF
19 - 9.0 et22
19 - 10.0 et22
Platinum Black with machine lip and Full Matte Black in stock

[Victory Road]

ADVAN RACING RZ-DF [Forged]



Advan Racing RZ-DF 19 - 9 +25 / 19 - 10 +22 (Matte Black) in stock and ready to ship.

[Ryan@IND]

quick update of Dark Gun Metal RS on Mahmood07's car







thanks for the support!

Who's next!

[Ryan@IND]

Not very often do you see both the Platinum Black and Flat Black finish all in one picture.



picture from BMW Familie 2010.

[Ryan@IND]

Here is a list of wheels available stateside, so that you won't have to wait the usual 10~12 weeks.

RS-D
19 - 9.0 et22
19 - 10.0 et20
Matte Black / Machining Black available

RS-D
20 - 9.0 et17
20 - 10.5 et25
Matte Black / Machining Black available

RZ-DF
19 - 9.0 et22
19 - 10.0 et22
Platinum Black / Matte black available

[Victory Road]

Tuned by T&E VERTICE DESIGN Japan
Wheel: ADVAN Racing RS-D Matte Black
20x9.0 +17 20x10.5 +25
Tire: ADVAN Sport Tire
245/35R20 275/30R20

[Caleb0413]

can you pm me about price

19's

if have them in stock

[stefanos-ktm]

Originally Posted by Julius@WSTO

quick update of Dark Gun Metal RS on Mahmood07's car







thanks for the support!

Who's next!

this are 19 or 18 thank you!!!

[Ryan@IND]

Originally Posted by stefanos-ktm

this are 19 or 18 thank you!!!

Those are 19 - 9.0/10.0 Dark Gun Metal that we did for mohamad

[stefanos-ktm]

Originally Posted by Julius@WSTO

Those are 19 - 9.0/10.0 Dark Gun Metal that we did for mohamad

thank you!

[Ryan@IND]

We have some RS-D and RZ-DF in various finish in stock for the M3.

We can also do a 19 - 9.5/10.0 RZ-DF set up in Matte Black for those interested in going with that quasi "sqaured" set up!

[Ryan@IND]

Stock update!

Advan RS
18" - 9.0 et24 /10.0 et20 Dark Gun Metal

Advan RS-D
19" - 9.0 et22 / 10.0 et20 Machining Black
20" - 9.0 et17 / 10.5 et25 Machining Silver / Machining Black / Matte Black

Advan RZ-DF
19" - 9.0 et20 / 10.0 et22 Matte Black

[Ryan@IND]

Stock Update!

Advan RS
18 - 9.5 et25
18 - 10.0 et20
Dark Gun Metal

19 - 9.0 et22
19 - 10.0 et20
Dark Gun Metal

Advan RS-D
19 - 9.0 et22
19 - 10.0 et20
Black Machining

20 - 9.0 et17
20 - 10.5 et25
Black Machining

20 - 9.0 et17
20 - 10.5 et25
Matte Black

20 - 9.0 et17
20 - 10.5 et25
Silver Machining