front lip install + long drive? cure time?

[哇靠M3]

I will be receiving my lip and diffuser next week. I have some questions about the installation and the cure time. The only time I will be able to install would be thursday next week. Right after the install I will be going on a long 6 hr drive.

I know that arkym lips and diffusers are installed with oem bolts + molding tape (3M industrial tape). Would there be a cure time for the double sided industrial tape? I was thinking about using masking/painter's tape on the front bumper as clearbra for my trip. Meaning that, before the long drive, I will tape the lip to the bumper and cover the bumper with painter's tape like clearbra.

Would this be efficient enough and hold down the lip?

[montreal red]

3m tape does not need a significant amount of cure time. just press it in place for a few mins and it bonds pretty quickly. its not like epoxy which needs time to dry... you should be fine to do your 6hr drive right after.

[哇靠M3]

Originally Posted by montreal red

3m tape does not need a significant amount of cure time. just press it in place for a few mins and it bonds pretty quickly. its not like epoxy which needs time to dry... you should be fine to do your 6hr drive right after.

thx bro