RPi GT Exhaust '08 M3

MrHarris · 12-17-2008, 08:32 PM

Quote:

Originally Posted by RPIpower

BTW, when we do the final tests for the M3 exhaust, all of you are welcome to come watch the dyno testing.

Sounds good, give me a call!

PPINESM3 · 12-19-2008, 04:01 AM

[QUOTE=RPIpower;3816532]Our M3 scoops are $99. As for the exhaust, we will most likely offer 2 different setups. The ST setup would include just the rear muffler section (around $1200-1400). The GT set up would be a more aggressive exhaust which includes the delete of the cats.

Are these the newest version onf the scoops designed specifically for he M3 and if so are they that much better than the red ones released a couple months ago for the 335/m3 that were on sale b/c they were slightly bent.
Thanks looking to order ASAP

PPINESM3 · 12-19-2008, 04:02 AM

Quote:

Originally Posted by RPIpower

Our M3 scoops are $99. As for the exhaust, we will most likely offer 2 different setups. The ST setup would include just the rear muffler section (around $1200-1400). The GT set up would be a more aggressive exhaust which includes the delete of the cats.

Its really not that beneficial other than telling someone you have a "titanium" exhaust. Aside from getting things overseas, working with the material is VERY expensive. All our products are made here in the states so the benefits vs. cost is really not there. For example our full exhaust system for the M5 weighs 59lbs compared to the stock 122lbs.

Are these the newest version onf the scoops designed specifically for he M3 and if so are they that much better than the red ones released a couple months ago for the 335/m3 that were on sale b/c they were slightly bent.
Thanks looking to order ASAP

KonigsTiger · 12-19-2008, 09:01 AM

The price certainly sounds attractive!

CPM5 · 12-27-2008, 11:16 AM

Any new on RPI exhausts?

ajj · 12-27-2008, 03:10 PM

Quote:

Originally Posted by Sticky

**********s, lots of issues with them, stay away.

I don't think they have an M3 specific scoop like RPI either, just a 335 scoop from AFE or something.

believe rpi's are also the same exact scoops for the 335 and m3. when i ordered them from the website, it didn't make make me specify between the 335 or m3....simply grouped them together. Hence, they're likely the same fitment/style for both cars.

RPIpower · 12-29-2008, 08:02 PM

Quote:

Originally Posted by m3psycho

Any new on RPI exhausts?

We are still working on the exhaust right now. The first few prototypes showed no hp gains and even though the sound was ok. We'll keep you all updated on the progress.

Quote:

Originally Posted by ajj

believe rpi's are also the same exact scoops for the 335 and m3. when i ordered them from the website, it didn't make make me specify between the 335 or m3....simply grouped them together. Hence, they're likely the same fitment/style for both cars.

The new 335 and M3 scoops are the same. The old M3 scoops did not work with the 335 (no hp gains).

RPIpower · 01-07-2009, 12:29 PM

Thanks for being patient guys. We are going to sell this exhaust as a GT series only. There exhaust system will be broken up in two sections.

Sec 1 header back race pipe (will need our ecu tune to avoid cel): $1224
Sec 2 Muffler Assembly: $1707

Full exhaust package price: $2637.90

Dyno charts will be available next week. You local guys are more than welcomed to come watch the dyno session and hear the exhaust in person.

JuniorDee · 01-07-2009, 12:55 PM

will the header back race pipe have silencers in it?. Can we assume that it will bolt up to the header and the oem muffler in the same way the AA x-pipe does?

M3 Montreal · 01-07-2009, 03:10 PM

WOW these definately have my interest. Decent price, now all we need are the Dynos!

My car is stored over the winter and this is exactly what I was waiting for ... MORE competition!!! As much as I like the ASR Dyno we havent heard anything since and the full system from AA is just WAY too expensive.

RPIpower · 01-07-2009, 04:47 PM

Quote:

Originally Posted by JuniorDee

will the header back race pipe have silencers in it?. Can we assume that it will bolt up to the header and the oem muffler in the same way the AA x-pipe does?

Both sections will bolt up using your oem clamps so they are interchangable. If one or the other will fit another company's exhaust I have no clue. We do encourage people not to mix and match though as the systems are designed as a whole. One companies front pipe might not perform well with anothers rear section. The race pipe will not have silencers in it. Its an all out aggressive race set up.

Quote:

Originally Posted by M3 Montreal

WOW these definately have my interest. Decent price, now all we need are the Dynos!

My car is stored over the winter and this is exactly what I was waiting for ... MORE competition!!! As much as I like the ASR Dyno we havent heard anything since and the full system from AA is just WAY too expensive.

You'll get dynos..... plenty of dyno session as EVERYTHING we make will be backed up on the dyno and on rear road testing.

PPINESM3 · 01-08-2009, 02:42 AM

[QUOTE=RPIpower;3912409].

You'll get dynos..... plenty of dyno session as EVERYTHING we make will be backed up on the dyno and on rear road testing.[/QUOTE

Wheres the dyno for your new M3 scoops?

RPIpower · 01-08-2009, 01:06 PM

[QUOTE=PPINESM3;3915428]

Quote:

Originally Posted by RPIpower

.

You'll get dynos..... plenty of dyno session as EVERYTHING we make will be backed up on the dyno and on rear road testing.[/QUOTE

Wheres the dyno for your new M3 scoops?

Here is one of JJ's

DLSJ5 · 01-11-2009, 01:07 AM

Quote:

Originally Posted by RPIpower

We are still working on the exhaust right now. The first few prototypes showed no hp gains and even though the sound was ok. We'll keep you all updated on the progress.

Appreciate your honesty on the power results from the exhaust. Were these dyno's with the 1st section, catless? It seems the real power comes from deleting the secondary cats, and replacing the primary cats with high flow cats, any plans to do this type of setup?

GT3 Tim · 01-12-2009, 09:42 AM

I think that dyno chart is for the scoops, not the exhaust.

M3 Montreal · 01-12-2009, 10:30 AM

Quote:

Originally Posted by DLSJ5

Appreciate your honesty on the power results from the exhaust. Were these dyno's with the 1st section, catless? It seems the real power comes from deleting the secondary cats, and replacing the primary cats with high flow cats, any plans to do this type of setup?

As GT3 above me mentionned that Dyno is for the scoops .

They havent yet posted the full exhaust.

DLSJ5 · 01-12-2009, 02:35 PM

Quote:

Originally Posted by M3 Montreal

As GT3 above me mentionned that Dyno is for the scoops .

They havent yet posted the full exhaust.

A little confusion, I'm not referring to that dyno on the scoops, and it appears they made some power. In his post, replying to a question from m3psycho, about the upcoming exhaust, he said the first few prototype exhausts made no power.

Originally Posted by m3psycho
Any new on RPI exhausts?

Quote:

Originally Posted by RPIpower

We are still working on the exhaust right now. The first few prototypes showed no hp gains and even though the sound was ok. We'll keep you all updated on the progress.

RPIpower · 01-14-2009, 05:23 PM

gthirtyfizle · 01-14-2009, 06:27 PM

any sound clips?

M3 Montreal · 01-14-2009, 07:32 PM

PM'd you .

Please put aside a full system exhaust and scoops and I will contact you for payment and delivery instructions.

Thank you

RPIpower · 01-14-2009, 07:32 PM

Quote:

Originally Posted by gthirtyfizle

any sound clips?

Here is the car on the dyno. Im uploading the drive by and rev videos now. Warning.....this exhaust is NOt for the mild hearted. This is made to put hair on your chest and guy standing behind your car squirm away.

DLSJ5 · 01-14-2009, 07:34 PM

Quote:

Originally Posted by RPIpower

Nice! Is this just the muffler section, or with cat mods?

12-19-2008, 04:01 AM	#24
PPINESM3 Private First Class 9 Rep 103 Posts Drives: e92 alpine M3 Join Date: May 2008 Location: Pembroke Pines FL iTrader: (0)	[QUOTE=RPIpower;3816532]Our M3 scoops are $99. As for the exhaust, we will most likely offer 2 different setups. The ST setup would include just the rear muffler section (around $1200-1400). The GT set up would be a more aggressive exhaust which includes the delete of the cats. Are these the newest version onf the scoops designed specifically for he M3 and if so are they that much better than the red ones released a couple months ago for the 335/m3 that were on sale b/c they were slightly bent. Thanks looking to order ASAP
	Appreciate 0 Quote

12-19-2008, 09:01 AM	#26
KonigsTiger Racying Dynamics 118 Rep 4,391 Posts Drives: E92M3 RS46 Club Sport, others Join Date: Jan 2008 Location: Dweller iTrader: (0)	The price certainly sounds attractive! __________________ ==================================================
	Appreciate 0 Quote

12-27-2008, 11:16 AM	#27
CPM5 Catch me if you can 63 Rep 679 Posts Drives: 16 F82 M4 Join Date: Dec 2008 Location: Bay Area iTrader: (2)	Any new on RPI exhausts?
	Appreciate 0 Quote

01-07-2009, 12:29 PM	#30
RPIpower Captain 49 Rep 857 Posts Drives: F97 X3M, G80 M3 Join Date: Aug 2007 Location: PA iTrader: (0)	Thanks for being patient guys. We are going to sell this exhaust as a GT series only. There exhaust system will be broken up in two sections. Sec 1 header back race pipe (will need our ecu tune to avoid cel): $1224 Sec 2 Muffler Assembly: $1707 Full exhaust package price: $2637.90 Dyno charts will be available next week. You local guys are more than welcomed to come watch the dyno session and hear the exhaust in person.
	Appreciate 0 Quote

01-07-2009, 12:55 PM	#31
JuniorDee Captain 73 Rep 610 Posts Drives: the speed limit Join Date: Apr 2007 Location: the land of brat and brotchen iTrader: (1)	will the header back race pipe have silencers in it?. Can we assume that it will bolt up to the header and the oem muffler in the same way the AA x-pipe does? __________________ EDC.....viagra for your car
	Appreciate 0 Quote

01-07-2009, 03:10 PM	#32
M3 Montreal Colonel 68 Rep 2,194 Posts Drives: 2012 M3 SG ,DCT & 2011 S4 Join Date: Oct 2008 Location: Montreal , Canada iTrader: (0)	WOW these definately have my interest. Decent price, now all we need are the Dynos! My car is stored over the winter and this is exactly what I was waiting for ... MORE competition!!! As much as I like the ASR Dyno we havent heard anything since and the full system from AA is just WAY too expensive.
	Appreciate 0 Quote

01-08-2009, 02:42 AM	#34
PPINESM3 Private First Class 9 Rep 103 Posts Drives: e92 alpine M3 Join Date: May 2008 Location: Pembroke Pines FL iTrader: (0)	[QUOTE=RPIpower;3912409]. You'll get dynos..... plenty of dyno session as EVERYTHING we make will be backed up on the dyno and on rear road testing.[/QUOTE Wheres the dyno for your new M3 scoops?
	Appreciate 0 Quote

01-12-2009, 09:42 AM	#37
GT3 Tim Moderator 94 Rep 1,920 Posts Drives: 2014 MB E63S Join Date: Feb 2008 Location: Sacramento, CA iTrader: (0)	I think that dyno chart is for the scoops, not the exhaust. __________________ Tim <--- apparently likes "3" cars 2014 E63S -- The Rocket 2014 F30 328i -- Kids car 2008 E90 M3 -- Sold 2004 GT3 -- Sold 1997 M3/4 -- Sold 1995 M3 -- Sold
	Appreciate 0 Quote

01-14-2009, 05:23 PM	#40
RPIpower Captain 49 Rep 857 Posts Drives: F97 X3M, G80 M3 Join Date: Aug 2007 Location: PA iTrader: (0)	RPi GT-Race exhaust: 24whp, 35wtq Last edited by RPIpower; 01-14-2009 at 07:41 PM..
	Appreciate 0 Quote

01-14-2009, 06:27 PM	#41
gthirtyfizle Colonel 191 Rep 2,867 Posts Drives: E92 M3 AW Join Date: Jul 2008 Location: NYC iTrader: (4)	any sound clips?
	Appreciate 0 Quote

01-14-2009, 07:32 PM	#42
M3 Montreal Colonel 68 Rep 2,194 Posts Drives: 2012 M3 SG ,DCT & 2011 S4 Join Date: Oct 2008 Location: Montreal , Canada iTrader: (0)	PM'd you . Please put aside a full system exhaust and scoops and I will contact you for payment and delivery instructions. Thank you
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search