 |
|
 |
|
|
|
| 04-03-2013, 11:01 AM | #1 |
429
Rep 4,650
Posts |
♦ Sonic MS | APEX EC-7 Lightweight Rotary Forged Wheels
 Sonic Motorsports 1045 West El Camino Real Mountain View, CA 94040 tel: 650-733-6506 fax: 650-691-9009 email: info@sonicms.net Presenting the ultra light, yet affordable one piece rotary forged APEX EC-7 Wheels. These wheels already come in E9X M3 specific widths and offsets, so no spacers or fender adjustments will be required.  This new wheel addresses the concerns of more and more racers and track day enthusiasts: long term durability, fit and performance. With the increase of faster and heavier cars being used in racing, HPDEs, and spirited driving, the EC-7 was designed and engineered to handle extreme abuse on track and street, offer a wide range of direct fitments, while producing a lightweight wheel.  An optimized car setup begins with the perfect wheel fitment. Without the perfect offsets, maximum tire widths and the potential of your car are always compromised. With this in mind, the EC-7 has three unique face profiles ranging from shallow to deep concavity resulting in 13 unique 18" sizes. This wide range of fitments allows for vehicle-specific caliper clearance, offsets, and tire widths, creating the most optimal setup possible. Feature Benefit Summary: - Comes with carbon-look APEX center caps - Accepts OEM Roundel center caps - Install using your factory lugs or a stud conversion - Accepts wheel spacers including 5mm thickness, while remaining hub-centric - OEM TPMS compatible - Industry Leading Warranty | 2 year Structural, 1 year limited finish warranty guarantees wheels will be free from defects in materials, workmanship and paint finish under normal and reasonable use. The EC-7's spoke profile has been designed with a curve to provide additional caliper clearance. It can clear a BBK spacer free on applications where the ARC-8 could not. A significant improvement to the EC-7 is the increased barrel clearance that now allows for the 18? version of this wheel to properly clear the Brembo 380mm BBK.  Just like the rest of the APEX wheel line, the EC-7 is once again produced using the Flow-Forming technique. Flow-forming, which has also been called “roll forging” or “spin forging”, produces a barrel with similar strength to that of a fully forged wheel. This significantly reduces weight in the barrel, which has the greatest impact on rotational mass. We’ve produced an even stronger wheel by combining the strength of the lightweight barrel with a more robust face design. The EC-7 welcomes endurance racing and potholes.          Please click the images for a higher resolution version. Designed for BMW applications, the EC-7 accepts TPMS sensors, factory lug bolts or stud conversion kits, and OEM roundel center caps. All wheels come with APEX center caps. Finishes Available: - Race Silver - Anthracite - Satin Black Recommended Fitment for the E9X M3. Staggered 18x9.5 ET22 (Est. 21.75 lbs) 18x10.5 ET27 (Est. 22.5 lbs) 265/35/18 285/35/18 Square 18x10 ET25 (Est. 22.45 lbs) 275/35/18 We also offer full rim and tire packages including OEM TPM sensors. We utilize the Hunter Road Force GSP9700 Balancer and “Touch-less” Auto 34 Mounting Machine to mount and balance your rims and tires safely and effectively, without risking any damage to your new investment. Recommended Tires: *Please click on link for more information on the tire, including pricing. 18 INCH STAGGERED SETUP Continental ExtremeContact DW  Hankook Ventus V12 evo K110  Hankook Ventus R-S3  Bridgestone Potenza S-04 Pole Position  Michelin Pilot Super Sport  18 INCH SQUARE SETUP Bridgestone Potenza RE760 Sport  Continental ExtremeContact DW Hankook Ventus V12 evo K110 Hankook Ventus R-S3 Bridgestone Potenza S-04 Pole Position Yokohama ADVAN Sport  Michelin Pilot Super Sport Dunlop Direzza Sport Z1 Star Spec  Pricing: 18 inch Staggered - $1336.00/set 18 inch Square - $1316.00/set *Note - Pricing above does not include shipping and/or sales tax (CA 8.25%), if applicable. For best pricing and ordering information, please email at cal@sonicms.net or shoot me a PM. Store Hours: Mon-Fri : 10AM-7PM PST Payments:  We accept all major Credit Cards, in addition to PayPal. We also offer professional on-site installation services for customers local to the SF Bay Area. Please contact us directly for more information. |
| 05-13-2013, 05:15 PM | #8 |
|
Panty Schtuffer
21
Rep 320
Posts
Drives: 2008 E92 M3 Coupe
Join Date: Aug 2011
Location: Perth, Orstralya!
|
can't wait until these come out in 19's
__________________
.: 2010 E71 X6M - stock, daily driver, towcar :. .: 2008 E92 M3 - 6MT, Carbon Roof, Eibach Springs, Megan Axle Back exhaust :. .: 1997 E36 323i Frankenstein - too much to list, track whore, stripped, caged, MoTeC, S85B50 :. .: 1994 E36 M3 3.0 - 19" BBS LM Reps, Bilsteins :. |
|
Appreciate
0
|
| 07-02-2013, 04:38 PM | #12 |
|
Major General
 
3427
Rep 6,769
Posts
Drives: 2016 BMW i8
Join Date: Dec 2006
Location: Monarch Beach
iTrader: (1)
Garage List 2012 BMW e92 M3 [0.00]
2021 BMW X5M [10.00] 2015 Porsche 991 Tu ... [10.00] 2015 Porsche 991 GT3 [10.00] |
^ ^ ^ ^ likewise, please send a quote for 18" squared Anthracite with NT01's.
I presume these will fit over StopTech BBKs (380/355)?
__________________
Current BMWs: 2022 X5 40i, 2016 X5 50i
2015 Porsche 991 Turbo S 1979 Porsche 911 Turbo a couple others IG: longboarder949; YouTube: https://www.youtube.com/channel/UCT1...eoFBszPIK0gf9w |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
