|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
08-14-2014, 07:18 PM | #1 |
Private First Class
64
Rep 102
Posts |
Help - Light System Failure Warning after battery replaced
I thought I was doing myself by replacing the battery myself. But of course now things are f'up.
Battery has same spec, i registered the battery, car can start but won't move due to a "lighting system failure" warning. Electric windows don't work either. Radio, front head lights go on etc... it just seems that the lighting system failure is preventing the car from operating properly. Thoughts? |
08-15-2014, 07:48 AM | #3 |
Private First Class
64
Rep 102
Posts |
I disconnected the battery, checked all the cables and reinstalled and still no change, light system failure fault (car up on jacks indicator)
I will disconnect the battery and let it sit for longer. Getting worried now... Is there a common controller module for windows, side, interior and rear lights? Last edited by zed512; 08-19-2014 at 08:50 AM.. |
Appreciate
0
|
08-15-2014, 10:47 AM | #4 |
Private First Class
64
Rep 102
Posts |
Old battery re-installed, all glove box fuses checked and I still get the following:
- Lighting System Failure (Car up on Jacks symbol) - No interior lights work apart from glove box and trunk - No rear or side lights or halos - Front lights, radio, seats dash etc work ok - Engine starts fine My only thought is I had the battery disconnected for 1.5hrs during the first install and its cleared some module settings. Any other fuses I should check? |
Appreciate
0
|
08-15-2014, 04:38 PM | #5 | |
BimmerPost Supporting Vendor
3387
Rep 7,541
Posts |
Quote:
__________________
-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |----- ----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133---- |
|
Appreciate
0
|
08-15-2014, 05:03 PM | #6 |
Private First Class
64
Rep 102
Posts |
Thanks Mike,
Any other fuses I should check apart from the glovebox fuses? Does the footwell module control the electric windows and side mirrors also? Last question would it do any harm to unplug and plug the module back in? |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|