|
|
12-30-2010, 03:12 AM | #1 |
Enlisted Member
4
Rep 40
Posts |
Open campaign?
I brought my 2010 E93 M3 into Southbay BMW today for an oil change. The service rep told me there's currently an open campaign on my car and they need to do some software update/reprogramming?
Does anyone know what this is and what they are going to do to my car? I asked the service guy and he was totally clueless. Just told me what the order number was...which I could not make heads or tails of... |
12-30-2010, 03:33 AM | #2 |
Bored at work....
890
Rep 5,390
Posts |
DCT?
__________________
Grey Matter:2008 E92 M3:608/425. SG/PS SOLD!
Dark Matter:2015 F80 M3:495/505. SOLD! Anti Matter :2016 F82 M4 GTS What next?!? A 2022 M235i GC- I must be getting old |
Appreciate
0
|
12-30-2010, 12:35 PM | #4 |
Brigadier General
126
Rep 4,145
Posts |
I know that many people are getting software upgrades which won't allow reprogramming by third party ECU tuners. I don't know if this is the only thing being changed in the software. If you have a choice just say no.
Cheers.
__________________
2017 F80 YMB.
|
Appreciate
0
|
12-30-2010, 12:47 PM | #5 |
octane chick
79
Rep 1,187
Posts
Drives: ex-M
Join Date: Oct 2010
Location: Colorado
|
Have you been in since Aug/Sept. There was a software update for DCT then. See http://www.m3post.com/forums/showpos...postcount=1725 for pdf.
|
Appreciate
0
|
12-30-2010, 11:00 PM | #6 |
Enlisted Member
4
Rep 40
Posts |
Well, I got my car back and here is what the service report said.
PERFORM PROGRAM ONLY ISTA 2.40.1 OR HIGHER 0028010100 CAUSE: recall due C SEE STORY 7267 WB 6000 recall due performed sib 28 01 10 per recall. performed complete vehicle programming and encoding w/ cas. prgramming failed at BO and ULF programming. performed battery reset. restarted vehicle programming and encoding successful the second time. ista/p ver 40.2.0.1. cleared faults. initialized sunroof and power windows. test drove veh. verified ok. Any ideas??? |
Appreciate
0
|
12-31-2010, 03:09 PM | #7 |
Rocket Scientist
33
Rep 948
Posts |
SI B28 01 10
Service Action: Program Control Units (DCT) MODEL E82, E88, E89, E90, E92, E93 vehicles with DCT transmission produced from 1/08/2008 to 8/31/2010 SITUATION Due to errors in the diagnostic software of the DCT (Dual Clutch Transmission) module, the "Freeze frame data" of the DCT memory can not be read out when using aftermarket scan tools. CAUSE DCT software error blah, blah, blah... It appears to be a non-function-impacting fix to allow non-BMW scan tools to read the DCT freeze frame data for diagnostic purposes. I presume that vehicle manufacturers are compelled to support some degree of scan tool interoperability, perhaps OBDII associated.
__________________
2015 BMW M5 Sedan Returned to BMW at end of lease.
|
Appreciate
0
|
12-31-2010, 03:26 PM | #8 |
Captain
15
Rep 751
Posts |
I had my car in the shop this week, and they kept the car overnight and did this reprogramming. The tech told me it related to the DCT clutch management, but that’s about all he knew. The car runs fine. I cannot tell any difference in anything so far.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|