|
|
08-23-2019, 07:25 PM | #1 |
Enlisted Member
13
Rep 33
Posts |
E094, CF27 Faults
Hello,
So as some may know, I posted about some errors with the 5AXX and 507X codes. That ended up being an alternator, but I do plan on having the car re-scanned to make sure that those errors are completely gone. Now I do have the following two errors: E094: No message (display transmission data) from the electronic transmission control, receiver gear selector switch, transmitter electronic transmission control/Sequential Manual Gearbox SMG/Twin-clutch gearbox CF27: Message (operation, gearbox selector switch 2, LIN) from GWS. If I try clearing and rerunning the code check, those two still show up. Any help is accepted. I'm at the end of the line with this one before I consider dropping a new tranny in. |
08-24-2019, 08:29 PM | #3 |
Enlisted Member
13
Rep 33
Posts |
Seems a little sluggish in sport mode.
Notice a hard engagement sometimes when starting off (I would take my foot off the brake and start gassing. The tranny would slam into gear and jerk forward. Feels like a bad tranny). No gear skipping though. Last edited by F18 Hornet; 08-24-2019 at 08:43 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|