iPhone6 + Gen1 iDrive (2008 e92 M3) - Pairing issue

[yyzron]

I have an iPhone6 and a 2008 M3 with a gen1 iDrive.

I am having issues successfully pairing the device. There is no entry for a pairing code on the phone, and anything i've tried to enter on the nav screen (0000, 1212, 1234, etc) immediately prompts an "unsuccessful" notice on the phone.

I did have this working previously with my iPhone 4S and deleted that phone from the paired devices.

Has anyone had success or a similar issue?

[Z K]

Mine worked fine...

[yyzron]

User issue found. I was entering the last 5 digits of my vin, on the phone instead of my intended pairing code. (i would have been fine if i used the same number again as the pairing code in the car)

For anyone else as dumb as me,
1. Start to pair device from Car.
2. Select the car BT identifier on phone
3. enter any code on the phone
4. re-enter the same code you just set on the phone, into the car.