[Mechatrosonic]

I have a set of wheels for E92 M3. But this time I changed my mind, I\'ll sell them on Internet auction.
Then a E46 M3 owner asked me whether he can install them on his E46 M3. Unfortunately I\'m not a specialist of wheel fitments, so if any of here can solve this issue, it would be great.
Spec are as follows
F19x9.5J 22mm
R19x10.0J 23mm

[M3SQRD]

Originally Posted by takuya9280

I have a set of wheels for E92 M3. But this time I changed my mind, I\'ll sell them on Internet auction.
Then a E46 M3 owner asked me whether he can install them on his E46 M3. Unfortunately I\'m not a specialist of wheel fitments, so if any of here can solve this issue, it would be great.
Spec are as follows
F19x9.5J 22mm
R19x10.0J 23mm

I doubt the rear 10" et23 will work even with rolled fenders and a stock ride height.

The front 9.5 et22 will work on the rear if the fenders are rolled (I currently run a 9.5" et25 on the rear of a track car) or probably if the car has not been lowered.

Nevertheless, neither wheel will fit on the front so even if the 10" fits on the rear there's no wheel for the front (most aggressive front is something like a 9.5" et35).