Sponsored by The Tire Rack

[Dek25ive]

Does anyone run these specs and know if it will fit properly without rubbing? Also pics please. Thanks.

[Dek25ive]

Also would it be able to clear a Brembo 380 BBK kit.

[Move Over]

What size tire do you intend to run? I run a set of 18x10 +20 front, +10 Rear (PSS 275/35/18, and RS3 in the same size) and I barely rubbed the plastic fender liner just in the rear. It rubbed through the plastic in the first couple of days and no longer rubs anymore.

[Dek25ive]

Was going to get a set of Works not anymore. Thanks for the input much appreciated.

[Niebank]

I will be at the HPDE at Roebling Road next weekend, it will be my first event with the new 18x10s running 275x35x18 nitto nt01s all around and Pagid RS19 pads. Update to follow.

[Move Over]

Originally Posted by Niebank

I will be at the HPDE at Roebling Road next weekend, it will be my first event with the new 18x10s running 275x35x18 nitto nt01s all around and Pagid RS19 pads. Update to follow.

Roebling!! Is this your first time there?

One of my favorite tracks. That epic back straight you should be able to tag 150 if you get a solid exit out of turn 9.

Tip for turn 9 - if you come out wide and start to lose your tail TAKE THE GRASS, don't try to correct it because you WILL hook and go straight into the wall.

Do you have an instructor? I will be there in November with Just Track it. Look into it, it's two days for 275.

[Niebank]

Yes, this will be my first time at Roebling. I won't know who my instructor will be until I get there. I will post a follow up afterward.

[Move Over]

Originally Posted by Niebank

Yes, this will be my first time at Roebling. I won't know who my instructor will be until I get there. I will post a follow up afterward.

Awesome man. You'll have a blast.

[evilspiritM3]

Originally Posted by Dek25ive

Does anyone run these specs and know if it will fit properly without rubbing? Also pics please. Thanks.

I run 18x10 +20 and don't have any issues with Nitto NT-01s 275/35/18, and my car is a fair bit lower than stock on MCS coilovers. I would think that the +18 should be fine.

[Niebank]

All I can say is WOW! The Nitto NT01 square setup was even better than I had imagined. There were three other drivers at this event that I have run pretty even with at other events and I was passing them regularly with the new tire and wheel setup. Exiting turn 9 at 110+ with a best lap time of 1:27.02 for the weekend. Wish I could have captured some video but Harry's Lap Timer was glitchy.

[Move Over]

Originally Posted by Niebank

All I can say is WOW! The Nitto NT01 square setup was even better than I had imagined. There were three other drivers at this event that I have run pretty even with at other events and I was passing them regularly with the new tire and wheel setup. Exiting turn 9 at 110+ with a best lap time of 1:27.02 for the weekend. Wish I could have captured some video but Harry's Lap Timer was glitchy.

Awesome time man. Turn 9 is exhilarating. I need to get me some NT01 after these RS3's wear out.