 |
|
 |
|
|
|
| 07-24-2012, 08:21 AM | #1 |
|
Grozniy
177
Rep 2,602
Posts |
power outage computer turns on but no display
Power went out last night when my computer was running. Computer turns on I can hear the beep but the HDD light does not come on and there is no display. What should my steps be here to troubleshoot the problem?
__________________
-fatman
|
| 07-24-2012, 11:49 AM | #2 |
|
Long Time Admirer, First Time Owner
17971
Rep 9,377
Posts |
Unplug computer. Open cover. Unplug everything, both power and data, then reseat. Same could be done with RAM chips.
Plug back in and fire her up. IF no response, you could put the HD into a USB enclosure and connect to another computer to see if HD got fried. |
|
Appreciate
0
|
| 07-24-2012, 11:55 AM | #3 |
|
Captain
 
81
Rep 834
Posts
Drives: 15 Subaru Outback 3.6R Limited
Join Date: Dec 2007
Location: Michigan
|
Your video card is probably dead, I have fried several and how you describe it is exactly what a dead video card looks like.
__________________
After enjoying 9 years with my BMW I am now Back in a Subie: formerly Mi330xi |
|
Appreciate
0
|
| 07-24-2012, 12:22 PM | #4 |
|
Long Time Admirer, First Time Owner
17971
Rep 9,377
Posts |
"but the HDD ligth does not come on" pretty much eliminates the video card, UNLESS the beeps he hears are POST beeps and different than his normal startup sounds.
|
|
Appreciate
0
|
| 07-24-2012, 02:40 PM | #5 |
|
C7Z - Darkside
50
Rep 226
Posts |
There are 4 key components in your PC:
Motherboard CPU Ram PSU If you have issues with one of them, the PC won't POST (power on self test) and you won't hear an audible beep when the PC is turned on. If you're not getting the POST beep, your issue is one of those components. I've seen a lot of surged PCs like either unplugging the box itself for an hour or so or unplugging the box AND power connectors from the motherboard. Give it an hour or two and then plug everything back in. Certain model HPs respond well to that. Beyond that, the best troubleshooting is swapping compatible components into a machine that can accept them, and narrowing it down to the one component in the POST list that stops it from booting. THat said, most PCs will attempt to post and display video output with no RAM, so I wouldn't start there. Good luck. |
|
Appreciate
0
|
| 07-24-2012, 02:56 PM | #6 |
|
Colonel
 
448
Rep 2,032
Posts
Drives: Red Flyer
Join Date: Aug 2008
Location: 38.8977° N, 77.0366° W
|
Do you have the issue where you press the power button and it just gives off a long loud beep? If so, I've just unplugged the power cord from the back of the tower and plugged it back in. That's fixed the problem.
__________________
 |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
