switching between tunes?

[coloradoe92m3]

I have a tune from one of main tuners but have a couple different tunes from them. One with cold start delete and normal redline and one with 8600 and servo changes. Do you have to flash back to OEM 240e each time you want to change tunes? Or you can load the tune directly withoud loading OEM 240 between?

[///M Power-Belgium]

Originally Posted by coloradoe92m3

I have a tune from one of main tuners but have a couple different tunes from them. One with cold start delete and normal redline and one with 8600 and servo changes. Do you have to flash back to OEM 240e each time you want to change tunes? Or you can load the tune directly withoud loading OEM 240 between?

When it's the BPM tune that you have every tune with or without cold start cycle it's included with the latest Oem 240E software !

[edwinm3]

Originally Posted by ///M Power-Belgium

When it's the BPM tune that you have every tune with or without cold start cycle it's included with the latest Oem 240E software !

This is pretty much the same with all these days not just BPM so nothing new there

OP, no you don't have to flash to 240E to flash to the desired tune, that's only done initially when you first tune the car. You can switch from one to the other.

[BPMSport]

As long as all of the revisions are on the same software version, you can switch between them without issue.