E92-Lighting V Style Carbon Fiber Rear Diffuser

THE TECH · 12-19-2011, 10:38 AM

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Selling my new (only put on car with two bolts to check appeal). No blemishes whatsoever. $200

Sco Cuddie · 12-19-2011, 11:50 AM

PM Sent

THE TECH · 12-19-2011, 11:53 AM

PM replied.

NOTFA5T · 12-19-2011, 01:33 PM

Willing to ship, If so can you quote me a price shippe to 48183 please?

M3PO · 12-19-2011, 01:38 PM

That's not an exact replica of the Vorsteiner diffuser, FYI. There are a few differences. I have one too. Mine appears to be a "hybrid" of the Vorsteiner Type I and 3D Carbon. Mine also has some unique details that aren't shared with any other diffuser. Because of that, I would take some more pics to make sure the buyer knows what they are getting.

THE TECH · 12-19-2011, 01:38 PM

Quote:

Originally Posted by NOTFA5T

Willing to ship, If so can you quote me a price shippe to 48183 please?

End of day(4 Business Days) FedEx Home Delivery® 48.00

THE TECH · 12-19-2011, 01:40 PM

Quote:

Originally Posted by M3PO

That's not an exact replica of the Vorsteiner diffuser, FYI. There are a few differences. I have one too. Mine appears to be a "hybrid" of the Vorsteiner Type I and 3D Carbon. Mine also has some unique details that aren't shared with any other diffuser. Because of that, I would take some more pics to make sure the buyer knows what they are getting.

Not claiming anything other than what I posted as well as what E92 Lighting calls it.

Pics taken in what additional manner would get the images you are referring?

M3PO · 12-19-2011, 01:58 PM

Quote:

Originally Posted by THE TECH

Not claiming anything other than what I posted as well as what E92 Lighting calls it.

Pics taken in what additional manner would get the images you are referring?

I'm not suggesting that you are being dishonest. I just know that I was surprised and slightly disappointed when I received mine and it was not exactly what I thought. Mine was marketed as a VRS replica also.

Yours may be different than mine but the differences between mine and the VRS Type 1 are that the "wings" on the sides don't curve up and follow the line of the bumper. It goes straight across similar to the Arkym or 3D (but without the rounded corner at the end). Also, the VRS does not have the "bumps" at the end (the "bumps" are similar to the 3D) or the tabs. Finally, on mine, the center section goes over the "swoop" that's below the grill whereas all other diffusers on the market go under it, leaving it exposed. If these differences are present on yours (I see the "bumps") and you can get pictures of them, I think perspective buyers would appreciate it.

HTH

THE TECH · 12-19-2011, 02:02 PM

Quote:

Originally Posted by M3PO

I'm not suggesting that you are being dishonest. I just know that I was surprised and slightly disappointed when I received mine and it was not exactly what I thought. Mine was marketed as a VRS replica also.

Yours may be different than mine but the differences between mine and the VRS Type 1 are that the "wings" on the sides don't curve up and follow the line of the bumper. It goes straight across similar to the Arkym or 3D (but without the rounded corner at the end). Also, the VRS does not have the "bumps" at the end (the "bumps" are similar to the 3D) or the tabs. Finally, on mine, the center section goes over the "swoop" that's below the grill whereas all other diffusers on the market go under it, leaving it exposed. If these differences are present on yours (I see the "bumps") and you can get pictures of them, I think perspective buyers would appreciate it.

HTH

Thanks for the insight. Adding additional pics as we speak.

M3PO · 12-19-2011, 02:30 PM

Based on those new pics, it looks most similar to a 3D diffuser (because of the bumps and how it comes straight across and has rounded corners) but with a middle fin (like Arkym). Also, it does look like it goes over the "swoop" under the grill which is a feature that no other diffuser I've seen has.

Raptor251 · 12-19-2011, 09:53 PM

Hit me up if you are ever in SD I have cash

THE TECH · 12-19-2011, 09:55 PM

Quote:

Originally Posted by Raptor251

Hit me up if you are ever in SD I have cash

I was just there Saturday. Prob not gonna be down there again for another month or two.

Raja Ventureshield · 12-19-2011, 10:10 PM

so this will fit an OEM exhaust. Also how much shipped to 20170.
PM me with mobile number if you want to close the deal.

THE TECH · 12-19-2011, 10:13 PM

Quote:

Originally Posted by Raja Ventureshield

so this will fit an OEM exhaust. Also how much shipped to 20170.
PM me with mobile number if you want to close the deal.

PM on the way.

THE TECH · 12-21-2011, 10:38 AM

mshab356 · 12-21-2011, 10:49 AM

How's the fitment? Any drilling/modification required or is it bolt on? Comes with necessary materials to install, or do I need to buy 3M tape/bolts etc? PM please if you'd like, I'm on my phone so I can't PM you

THE TECH · 12-21-2011, 11:05 AM

Quote:

Originally Posted by mshab356

How's the fitment? Any drilling/modification required or is it bolt on? Comes with necessary materials to install, or do I need to buy 3M tape/bolts etc? PM please if you'd like, I'm on my phone so I can't PM you

I never installed it, only put it up to the car for a period of 5 minutes. You will need to provide your own 3M tape as none was provided when I purchased new. I'm fairly sure no drilling is needed.

Elaz · 12-23-2011, 07:11 PM

Quote:

Originally Posted by THE TECH

Selling my new (only put on car with two bolts to check appeal). No blemishes whatsoever. $200

hey I'm in NYC how much shipped here. I'll take it asap.

THE TECH · 12-27-2011, 01:49 PM

^^^SOLD!

12-19-2011, 10:38 AM	#1
THE TECH BimmerPost Supporting Vendor 307 Rep 13,093 Posts Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas iTrader: (45) Garage List 2013 Nissan GTR [0.00] 2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00]	E92-Lighting V Style Carbon Fiber Rear Diffuser BIMMERPOST / Classifieds Asking Price: None Item Interest Selling my new (only put on car with two bolts to check appeal). No blemishes whatsoever. $200 Last edited by THE TECH; 12-19-2011 at 09:57 PM..
	Appreciate 0 Tweet Quote

12-19-2011, 11:50 AM	#2
Sco Cuddie Second Lieutenant 75 Rep 295 Posts Drives: 2008 BMW M3 Join Date: Jul 2011 Location: Bay Area, CA iTrader: (2)	PM Sent
	Appreciate 0 Quote

12-19-2011, 11:53 AM	#3
THE TECH BimmerPost Supporting Vendor 307 Rep 13,093 Posts Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas iTrader: (45) Garage List 2013 Nissan GTR [0.00] 2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00]	PM replied.
	Appreciate 0 Quote

12-19-2011, 01:33 PM	#4
NOTFA5T Facebook.com/MotorCityRally 21 Rep 280 Posts Drives: Viper GTS, M235I, Jeep JK Join Date: Sep 2011 Location: Detroit, MI iTrader: (6) Garage List 2008 E92 M3 [0.00]	Willing to ship, If so can you quote me a price shippe to 48183 please? __________________ Gen V Viper GTS TT 2015 M235I- Burger intake and Rebellion tune. 2015 Jeep JK daily mud toy. Facebook.com/MotorCityRally
	Appreciate 0 Quote

12-19-2011, 01:38 PM	#5
M3PO Colonel 84 Rep 2,792 Posts Drives: '08 IB E92 Join Date: Sep 2011 Location: OC iTrader: (7)	That's not an exact replica of the Vorsteiner diffuser, FYI. There are a few differences. I have one too. Mine appears to be a "hybrid" of the Vorsteiner Type I and 3D Carbon. Mine also has some unique details that aren't shared with any other diffuser. Because of that, I would take some more pics to make sure the buyer knows what they are getting.
	Appreciate 0 Quote

12-19-2011, 02:30 PM	#10
M3PO Colonel 84 Rep 2,792 Posts Drives: '08 IB E92 Join Date: Sep 2011 Location: OC iTrader: (7)	Based on those new pics, it looks most similar to a 3D diffuser (because of the bumps and how it comes straight across and has rounded corners) but with a middle fin (like Arkym). Also, it does look like it goes over the "swoop" under the grill which is a feature that no other diffuser I've seen has.
	Appreciate 0 Quote

12-19-2011, 09:53 PM	#11
Raptor251 ESS Dreaming 27 Rep 870 Posts Drives: 2011.5 e92 m3/Ford Raptor 6.2 Join Date: Jan 2011 Location: San Diego iTrader: (1)	Hit me up if you are ever in SD I have cash
	Appreciate 0 Quote

12-19-2011, 10:10 PM	#13
Raja Ventureshield Major General 288 Rep 5,686 Posts Drives: BMW M3 coupe Join Date: May 2007 Location: Northern VA iTrader: (6)	so this will fit an OEM exhaust. Also how much shipped to 20170. PM me with mobile number if you want to close the deal.
	Appreciate 0 Quote

12-21-2011, 10:38 AM	#15
THE TECH BimmerPost Supporting Vendor 307 Rep 13,093 Posts Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas iTrader: (45) Garage List 2013 Nissan GTR [0.00] 2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00]
	Appreciate 0 Quote

12-21-2011, 10:49 AM	#16
mshab356 Go ///M or go home 276 Rep 1,280 Posts Drives: 2015 F80 M3 6MT Join Date: Jan 2007 Location: Los Angeles, CA iTrader: (5)	How's the fitment? Any drilling/modification required or is it bolt on? Comes with necessary materials to install, or do I need to buy 3M tape/bolts etc? PM please if you'd like, I'm on my phone so I can't PM you __________________ 2015 AB/SO F80 M3 6MT \| 19" Black M437 \| KW H.A.S. \| AutoTechnik Black Front Grills \| BMW Performance Side Grills \| Painted Front Bumper Reflectors \| Gloss Black Exhaust Tips GONE 2011 SG/Blk E92 M3 CS 6MT
	Appreciate 0 Quote

12-27-2011, 01:49 PM	#19
THE TECH BimmerPost Supporting Vendor 307 Rep 13,093 Posts Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas iTrader: (45) Garage List 2013 Nissan GTR [0.00] 2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00]	^^^SOLD!
	Appreciate 0 Quote